Seksyen 1
(1)
Kaedah-kaedah ini bolehlah dinamakan Kaedah-Kaedah Kenderaan
Motor (Pembinaan dan Penggunaan) (Pindaan) 2011.
(2)
Kaedah-Kaedah ini mula berkuat kuasa pada 1 Januari 2012.
Kaedah baru 9A dan 9B
/akn/my/act/pua/2011/409
The full official text, structured for quick navigation. Copy any provision or jump straight to a section.
Quick answer
KAEDAH-KAEDAH KENDERAAN MOTOR (PEMBINAAN DAN PENGGUNAAN)(PINDAAN) 2011 is Malaysia P.U. (A), cited as P.U. (A) 409 2011, currently marked in force and first recorded in 2011.
Opening note
Kaedah-kaedah ini bolehlah dinamakan Kaedah-Kaedah Kenderaan
Motor (Pembinaan dan Penggunaan) (Pindaan) 2011.
Kaedah-Kaedah ini mula berkuat kuasa pada 1 Januari 2012.
Kaedah baru 9A dan 9B
Kaedah-Kaedah Kenderaan Motor (Pembinaan dan Penggunaan) 1959
[L.N. 170/1959], yang disebut “Kaedah-Kaedah ibu” dalam Kaedah-Kaedah ini, dipinda dengan memasukkan selepas kaedah 9 kaedah yang berikut:
“Approval for construction of motor vehicle
prior approval has been obtained from the
Director General of its particular, type, design and suitability to be used as a vehicle;
the body of the motor vehicle is made in accordance with the plan and elevation general arrangement drawings which have been approved by the Director General;
conform to the specifications as specified in the Third Schedule; or
3
Requirements for electric motor vehicle
in accordance with any other requirement as the Director General may determine, as the case may be.
A motor vehicle referred to in subrule (1) shall include an electric motor vehicle.
An electric motor vehicle shall—
bear a clear, distinct and untampered motor serial number and chassis number;
use a battery, including its installation, that is certified by a competent body recognized by the Director
General;
use an electrical wiring system from an electrical resistant material and certified by a competent body recognized by the Director General; and
in respect of an electric motorcycle, conform to the specifications of MS 2413 Specification for Electric
Motorcycles.”.
4
Kaedah-Kaedah ibu dipinda dengan memasukkan selepas Jadual Kedua jadual yang berikut:
“THIRD SCHEDULE
(Rule 9A)
SPECIFICATIONS FOR CONSTRUCTION OF MOTOR VEHICLES
The construction of a motor vehicle shall conform to the following specifications, as the case requires:
UN ECE Regulation 3 Uniform Provisions Concerning the Approval of Retro-Reflecting Devices for Power-Driven Vehicles and Their Trailers;
UN ECE Regulation 6 Uniform Provisions Concerning the Approval of Direction
Indicators for Motor Vehicles and Their Trailers;
UN ECE Regulation 7 Uniform Provisions Concerning the Approval of Front and
Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for
Motor Vehicles (Except Motorcycles) and Their Trailers;
UN ECE Regulation 13 Uniform Provisions Concerning the Approval of Vehicles of Categories M, N and O With Regard to Braking;
UN ECE Regulation 13-H Uniform Provisions Concerning the Approval of
Vehicles of Categories M, N and O With Regard to Braking;
UN ECE Regulation 14 Uniform Provisions Concerning the Approval of Vehicles
With Regard to Safety-Belt Anchorages, Isofix Anchorages Systems and Isofix
Top Tether Anchorages;
UN ECE Regulation 17 Uniform Provisions Concerning the Approval of Vehicles
With Regard to the Seats, Their Anchorages and any Head Restraints;
5
UN ECE Regulation 25 Uniform Provisions Concerning the Approval of Head
Restraints (Headrests), Whether or Not Incorporated in Vehicle Seats;
UN ECE Regulation 28 Uniform Provisions Concerning the Approval of Audible
Warning Devices and of Motor Vehicles With Regard to Their Audible Signals;
UN ECE Regulation 39 Uniform Provisions Concerning the Approval of Vehicles
With Regard to the Speedometer Equipment Including its Installation;
UN ECE Regulation 40 Uniform Provisions Concerning the Approval of
Motorcycles Equipped With a Positive-Ignition Engine With Regard to the
Emission of Gaseous Pollutants by the Engine;
UN ECE Regulation 41 Uniform Provisions Concerning the Approval of
Motorcycles With Regard to Noise;
UN ECE Regulation 43 Uniform Provisions Concerning the Approval of Safety
Glazing Materials and Their Installation on Vehicles;
UN ECE Regulation 46 Uniform Provisions Concerning the Approval of Devices for Indirect Vision and of Motor Vehicles With Regard to the Installation of These
Devices;
UN ECE Regulation 48 Uniform Provisions Concerning the Approval of Vehicles
With Regard to the Installation of Lighting-Signalling Devices;
UN ECE Regulation 50 Uniform Provisions Concerning the Approval of Front
Position Lamps, Rear Position Lamps, Stop Lamps, Direction Indicators and Rear-Registration-Plate Illuminating Devices for Mopeds, Motorcycles and Vehicles
Treated as Such;
UN ECE Regulation 51 Uniform Provisions Concerning the Approval of Motor
Vehicles Having At Least Four Wheels With Regard to Their Noise Emissions;
6
UN ECE Regulation 53 Uniform Provisions Concerning the Approval of Category
L3 Vehicles With Regard to the Installation of Lighting and Light-Signalling
Devices;
UN ECE Regulation 58 Uniform Provisions Concerning the Approval of:
UN ECE Regulation 69 Uniform Provisions Concerning the Approval of Rear
Marking Plates for Slow Moving Vehicles (By Construction) and Their Trailers;
UN ECE Regulation 70 Uniform Provisions Concerning the Approval of Rear
Marking Plates for Heavy and Long Vehicles;
UN ECE Regulation 73 Uniform Provisions Concerning the Approval of Goods
Vehicles Trailers, Trailers and Semi-Trailers With Regard to Their Lateral
Protection;
UN ECE Regulation 75 Uniform Provisions Concerning the Approval of
Pneumatic Tyres for Motorcycles and Mopeds;
UN ECE Regulation 78 Uniform Provisions Concerning the Approval of Vehicles of Category L With Regard to Braking;
UN ECE Regulation 79 Uniform Provisions Concerning the Approval of Vehicles
With Regard to Steering Equipment;
UN ECE Regulation 81 Uniform Provisions Concerning the Approval of Rear View
Mirrors of Two-Wheeled Power-Driven Vehicles With or Without Side Car, With
Regard to the Mounting of Rear-View Mirrors on Handlebars;
7
UN ECE Regulation 83 Uniform Provisions Concerning the Approval of Vehicles
With Regard to the Emission of Pollutants According to Engine Fuel
Requirements;
UN ECE Regulation 90 Uniform Provisions Concerning the Approval of
Replacement Brake Lining Assemblies and Drum Brake Linings for Power-Driven
Vehicles and Their Trailers;
UN ECE Regulation 93 Uniform Provisions Concerning the Approval of:
UN ECE Regulation 94 Uniform Provisions Concerning the Approval of Vehicles
With Regard to the Protection of the Occupants in the Event of a Frontal
Collision;
UN ECE Regulation 95 Uniform Provisions Concerning the Approval of Vehicles
With Regard to the Protection of the Occupants in the Event of a Lateral
Collision;
UN ECE Regulation 100 Uniform Provisions Concerning the Approval of Battery
Electric Vehicles With Regard to Specific Requirements for the Instruction,
Functional Safety and Hydrogen Emission;
UN ECE Regulation 104 Uniform Provisions Concerning the Approval of Retro-Reflective Markings for Heavy and Long Vehicles and Their Trailers;
UN ECE Regulation 112 Uniform Provisions Concerning the Approval of Motor
Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped With Filament Lamps; and
8
UN ECE Regulation 113 Uniform Provisions Concerning the Approval of Motor
Vehicle Headlamps Emitting a Symmetrical Passing Beam or a Driving Beam or
Both and Equipped With Filament Lamps.”.
Dibuat 9 Disember 2011
[KP/PUU/0.440/W/BD/9; PN(PU2)460/LXIV]
DATO’ SERI KONG CHO HA
Menteri Pengangkutan
9
ROAD TRANSPORT ACT 1987
MOTOR VEHICLES (CONSTRUCTION AND USE)(AMENDMENT) RULES 2011
Opening note
These rules may be cited as the Motor Vehicles (Construction and Use)
(Amendment) Rules 2011.
The Motor Vehicles (Construction and Use) Rules 1959 [L.N. 170/1959], which are referred to as the “principal Rules” in these Rules, are amended by inserting after rule 9 the following rules:
“Approval for construction of motor vehicle
prior approval has been obtained from the
Director General of its particular, type, design and suitability to be used as a vehicle;
the body of the motor vehicle is made in accordance with the plan and elevation general arrangement drawings which have been approved by the Director General;
in accordance with any other requirement as the
10
Requirements for electric motor vehicle
Director General may determine, as the case may be.
A motor vehicle referred to in subrule (1) shall include an electric motor vehicle.
An electric motor vehicle shall—
bear a clear, distinct and untampered motor serial number and chassis number;
use a battery, including its installation, that is certified by a competent body recognized by the Director
General;
use an electrical wiring system from an electrical resistant material and certified by a competent body recognized by the Director General; and
in respect of an electric motorcycle, conform to the specifications of MS 2413 Specification for Electric
Motorcycles.”.
11
The principal Rules are amended by inserting after the Second Schedule the following schedule:
“THIRD SCHEDULE
(Rule 9A)
SPECIFICATIONS FOR CONSTRUCTION OF MOTOR VEHICLES
The construction of a motor vehicle shall conform to the following specifications, as the case requires:
UN ECE Regulation 3 Uniform Provisions Concerning the Approval of Retro-Reflecting Devices for Power-Driven Vehicles and Their Trailers;
UN ECE Regulation 6 Uniform Provisions Concerning the Approval of Direction
Indicators for Motor Vehicles and Their Trailers;
UN ECE Regulation 7 Uniform Provisions Concerning the Approval of Front and
Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for
Motor Vehicles (Except Motorcycles) and Their Trailers;
UN ECE Regulation 13 Uniform Provisions Concerning the Approval of Vehicles of Categories M, N and O With Regard to Braking;
UN ECE Regulation 13-H Uniform Provisions Concerning the Approval of
Vehicles of Categories M, N and O With Regard to Braking;
UN ECE Regulation 14 Uniform Provisions Concerning the Approval of Vehicles
With Regard to Safety-Belt Anchorages, Isofix Anchorages Systems and Isofix
Top Tether Anchorages;
12
UN ECE Regulation 17 Uniform Provisions Concerning the Approval of Vehicles
With Regard to the Seats, Their Anchorages and any Head Restraints;
UN ECE Regulation 25 Uniform Provisions Concerning the Approval of Head
Restraints (Headrests), Whether or Not Incorporated in Vehicle Seats;
UN ECE Regulation 28 Uniform Provisions Concerning the Approval of Audible
Warning Devices and of Motor Vehicles With Regard to Their Audible Signals;
UN ECE Regulation 39 Uniform Provisions Concerning the Approval of Vehicles
With Regard to the Speedometer Equipment Including its Installation;
UN ECE Regulation 40 Uniform Provisions Concerning the Approval of
Motorcycles Equipped With a Positive-Ignition Engine With Regard to the
Emission of Gaseous Pollutants by the Engine;
UN ECE Regulation 41 Uniform Provisions Concerning the Approval of
Motorcycles With Regard to Noise;
UN ECE Regulation 43 Uniform Provisions Concerning the Approval of Safety
Glazing Materials and Their Installation on Vehicles;
UN ECE Regulation 46 Uniform Provisions Concerning the Approval of Devices for Indirect Vision and of Motor Vehicles With Regard to the Installation of These
Devices;
UN ECE Regulation 48 Uniform Provisions Concerning the Approval of Vehicles
With Regard to the Installation of Lighting-Signalling Devices;
UN ECE Regulation 50 Uniform Provisions Concerning the Approval of Front
Position Lamps, Rear Position Lamps, Stop Lamps, Direction Indicators and
Rear-Registration-Plate Illuminating Devices for Mopeds, Motorcycles and
Vehicles Treated as Such;
13
UN ECE Regulation 51 Uniform Provisions Concerning the Approval of Motor
Vehicles Having At Least Four Wheels With Regard to Their Noise Emissions;
UN ECE Regulation 53 Uniform Provisions Concerning the Approval of Category
L3 Vehicles With Regard to the Installation of Lighting and Light-Signalling
Devices;
UN ECE Regulation 58 Uniform Provisions Concerning the Approval of:
UN ECE Regulation 69 Uniform Provisions Concerning the Approval of Rear
Marking Plates for Slow Moving Vehicles (By Construction) and Their Trailers;
UN ECE Regulation 70 Uniform Provisions Concerning the Approval of Rear
Marking Plates for Heavy and Long Vehicles;
UN ECE Regulation 73 Uniform Provisions Concerning the Approval of Goods
Vehicles Trailers, Trailers and Semi-Trailers With Regard to Their Lateral
Protection;
UN ECE Regulation 75 Uniform Provisions Concerning the Approval of
Pneumatic Tyres for Motorcycles and Mopeds;
UN ECE Regulation 78 Uniform Provisions Concerning the Approval of Vehicles of Category L With Regard to Braking;
UN ECE Regulation 79 Uniform Provisions Concerning the Approval of Vehicles
With Regard to Steering Equipment;
14
UN ECE Regulation 81 Uniform Provisions Concerning the Approval of Rear View
Mirrors of Two-Wheeled Power-Driven Vehicles With or Without Side Car, With
Regard to the Mounting of Rear-View Mirrors on Handlebars;
UN ECE Regulation 83 Uniform Provisions Concerning the Approval of Vehicles
With Regard to the Emission of Pollutants According to Engine Fuel
Requirements;
UN ECE Regulation 90 Uniform Provisions Concerning the Approval of
Replacement Brake Lining Assemblies and Drum Brake Linings for Power-Driven
Vehicles and Their Trailers;
UN ECE Regulation 93 Uniform Provisions Concerning the Approval of:
UN ECE Regulation 94 Uniform Provisions Concerning the Approval of Vehicles
With Regard to the Protection of the Occupants in the Event of a Frontal
Collision;
UN ECE Regulation 95 Uniform Provisions Concerning the Approval of Vehicles
With Regard to the Protection of the Occupants in the Event of a Lateral
Collision;
UN ECE Regulation 100 Uniform Provisions Concerning the Approval of Battery
Electric Vehicles With Regard to Specific Requirements for the Instruction,
Functional Safety and Hydrogen Emission;
UN ECE Regulation 104 Uniform Provisions Concerning the Approval of Retro-Reflective Markings for Heavy and Long Vehicles and Their Trailers;
15
UN ECE Regulation 112 Uniform Provisions Concerning the Approval of Motor
Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped With Filament Lamps; and
UN ECE Regulation 113 Uniform Provisions Concerning the Approval of Motor
Vehicle Headlamps Emitting a Symmetrical Passing Beam or a Driving Beam or
Both and Equipped With Filament Lamps.”.
Made 9 December 2011
[KP/PUU/0.440/W/BD/9; PN(PU2)460/LXIV]
DATO’ SERI KONG CHO HA
Minister of Transport