Skip to content
In forceAs enacted

P.U. (B)

Notis Penentuan Muktamad Afirmatif Penyiasatan Duti Anti-Lambakan Berkenaan Dengan Import Produk Gulungan Rata Besi Aloi atau Keluli Bukan Aloi, Disadur atau Disalut Dengan Zink, Menggunakan Proses Celupan Panas (Gegelung/ Kepingan Besi Bergalvani atau Gegelung/ Kepingan Keluli Bergalvani) yang Berasal atau Dieksport Dari Republik Rakyat China, Republik Korea dan Republik Sosialis Viet Nam

Feedback & support

The text

31 Oktober 2025 31 October 2025

P.U. (B) 388

WARTA KERAJAAN PERSEKUTUAN

FEDERAL GOVERNMENT

GAZETTE

NOTIS PENENTUAN MUKTAMAD AFIRMATIF

PENYIASATAN DUTI ANTI-LAMBAKAN BERKENAAN DENGAN

IMPORT PRODUK GULUNGAN RATA BESI ALOI ATAU KELULI

BUKAN ALOI, DISADUR ATAU DISALUT DENGAN ZINK,

MENGGUNAKAN PROSES CELUPAN PANAS (GEGELUNG/

KEPINGAN BESI BERGALVANI ATAU GEGELUNG/

KEPINGAN KELULI BERGALVANI) YANG BERASAL ATAU

DIEKSPORT DARI REPUBLIK RAKYAT CHINA, REPUBLIK KOREA

DAN REPUBLIK SOSIALIS VIET NAM

NOTICE OF AFFIRMATIVE FINAL DETERMINATION OF

AN ANTI-DUMPING DUTY INVESTIGATION WITH REGARD TO

IMPORTS OF FLAT-ROLLED PRODUCTS OF IRON ALLOY OR

NON-ALLOY STEEL, PLATED OR COATED WITH ZINC, USING HOT

DIP PROCESS (GALVANISED IRON COILS/SHEETS OR GALVANISED

STEEL COILS/SHEETS) ORIGINATED OR EXPORTED FROM

THE PEOPLE’S REPUBLIC OF CHINA, THE REPUBLIC OF KOREA AND

THE SOCIALIST REPUBLIC OF VIET NAM

DISIARKAN OLEH/

JABATAN PEGUAM NEGARA/

ATTORNEY GENERAL’S CHAMBERS

P.U. (B) 388 2

AKTA DUTI TIMBAL BALAS DAN ANTI-LAMBAKAN 1993

NOTIS PENENTUAN MUKTAMAD AFIRMATIF PENYIASATAN DUTI ANTI-LAMBAKAN

BERKENAAN DENGAN IMPORT PRODUK GULUNGAN RATA BESI ALOI ATAU

KELULI BUKAN ALOI, DISADUR ATAU DISALUT DENGAN ZINK, MENGGUNAKAN

PROSES CELUPAN PANAS (GEGELUNG/KEPINGAN BESI BERGALVANI ATAU

GEGELUNG/KEPINGAN KELULI BERGALVANI) YANG BERASAL ATAU DIEKSPORT DARI

REPUBLIK RAKYAT CHINA, REPUBLIK KOREA DAN REPUBLIK SOSIALIS VIET NAM

(AD 01/25)

Preamble

PADA menjalankan kuasa yang diberikan oleh perenggan 25(4)(a)

Akta

Duti

Timbal

Balas dan

Anti-Lambakan 1993

[Akta 504]

dan peraturan 15 Peraturan-Peraturan Duti Timbal Balas dan Anti-Lambakan 1994

[P.U. (A) 233/1994], Kerajaan telah membuat penentuan muktamad di bawah subseksyen 25(1) Akta bahawa—

(a)

suatu margin lambakan wujud berkenaan dengan import produk gulungan rata besi aloi atau keluli bukan aloi, disadur atau disalut dengan zink, menggunakan proses celupan panas (gegelung/kepingan besi bergalvani atau gegelung/kepingan keluli bergalvani) yang dikelaskan di bawah

Kod Sistem yang Diharmonikan (“Kod H.S.”) dan Tatanama Tarif

Berharmonis

ASEAN

(“AHTN”)

7210.49.11 00,

7210.49.17 00,

7210.49.18 00, 7210.49.19 00, 7210.49.91 00, 7210.49.99 00, 7212.30.11 00,

7212.30.12 00, 7212.30.13 00, 7212.30.14 00, 7212.30.19 00, 7212.30.90 00,

7225.92.90 00, 7225.99.90 00, 7226.99.11 00, 7226.99.19 00, 7226.99.91 00

dan 7226.99.99 00 yang berasal atau dieksport dari Republik Rakyat China,

Republik Korea dan Republik Sosialis Viet Nam (“dagangan subjek”); dan

(b)

kemudaratan didapati wujud kerana industri dalam negeri di Malaysia yang mengeluarkan keluaran serupa telah mengalami kemudaratan material disebabkan oleh pengimportan dagangan subjek ke dalam

Malaysia.

P.U. (B) 388 3

Butiran yang berhubungan dengan margin lambakan 2.

Butiran yang berhubungan dengan margin lambakan berkenaan dengan import dagangan subjek yang didapati daripada proses penentuan muktamad afirmatif adalah sebagaimana yang dinyatakan dalam Jadual Pertama.

Sebab bagi penentuan muktamad afirmatif 3.

Sebab bagi penentuan muktamad afirmatif adalah seperti yang berikut:

(a)

harga eksport dagangan subjek adalah kurang daripada nilai normalnya;

(b)

industri dalam negeri di Malaysia yang mengeluarkan keluaran serupa telah mengalami kemudaratan material yang boleh dengan semunasabahnya dikaitkan dengan pengimportan dagangan subjek ke dalam Malaysia; dan

(c)

margin lambakan didapati wujud melalui kegiatan lambakan oleh pengeluar atau pengeksport dari Republik Rakyat China, Republik Korea dan Republik Sosialis Viet Nam sebagaimana yang dinyatakan dalam

Jadual Pertama.

Duti anti-lambakan 4.

Duti anti-lambakan yang akan dikenakan kepada pengeluar atau pengeksport yang dinyatakan dalam Jadual Pertama hendaklah sebagaimana yang dinyatakan dalam

Jadual Kedua.

Sebab bagi pengenaan duti anti-lambakan 5.

Sebab bagi pengenaan duti anti-lambakan di bawah perenggan 4 adalah untuk mencegah kemudaratan kepada industri dalam negeri di Malaysia yang mengeluarkan keluaran serupa.

Tempoh pengenaan duti anti-lambakan 6.

Duti anti-lambakan yang dikenakan di bawah perenggan 4 hendaklah terpakai bagi tempoh lima tahun mulai 1 November 2025 hingga 31 Oktober 2030.

P.U. (B) 388 4

COUNTERVAILING AND ANTI-DUMPING DUTIES ACT 1993

NOTICE OF AFFIRMATIVE FINAL DETERMINATION OF AN ANTI-DUMPING DUTY

INVESTIGATION WITH REGARD TO IMPORTS OF FLAT-ROLLED PRODUCTS OF

IRON ALLOY OR NON-ALLOY STEEL, PLATED OR COATED WITH ZINC, USING HOT DIP

PROCESS (GALVANISED IRON COILS/SHEETS OR GALVANISED STEEL COILS/SHEETS)

ORIGINATED OR EXPORTED FROM THE PEOPLE’S REPUBLIC OF CHINA,

THE REPUBLIC OF KOREA AND THE SOCIALIST REPUBLIC OF VIET NAM

(AD 01/25)

Preamble

IN exercise of the powers conferred by paragraph 25(4)(a)

of the Countervailing and Anti-Dumping Duties Act 1993 [Act 504] and regulation 15

of the Countervailing and Anti-Dumping Duties Regulations 1994 [P.U. (A) 233/1994], the Government has made a final determination under subsection 25(1) of the Act that—

(a)

a dumping margin exists with regard to the imports of flat-rolled products of iron alloy or non-alloy steel, plated or coated with zinc, using hot dip process (galvanised iron coils/sheets or galvanised steel coils/sheets)

classified under the Harmonised System Code (“H.S. Code”) and ASEAN

Harmonised Tariff Nomenclature (“AHTN”) 7210.49.11 00, 7210.49.17 00,

7210.49.18 00, 7210.49.19 00, 7210.49.91 00, 7210.49.99 00,

7212.30.11 00, 7212.30.12 00, 7212.30.13 00, 7212.30.14 00,

7212.30.19 00, 7212.30.90 00, 7225.92.90 00, 7225.99.90 00,

7226.99.11 00, 7226.99.19 00, 7226.99.91 00 and 7226.99.99 00

originated or exported from the People’s Republic of China, the Republic of

Korea and the Socialist Republic of Viet Nam (“subject merchandise”); and

(b)

an injury is found to exist because the domestic industry in Malaysia producing the like product has suffered material injury by reason of the importation of the subject merchandise into Malaysia.

Particulars relating to dumping margin 2.

The particulars relating to the dumping margin with regard to the imports of the subject merchandise which were found from the affirmative final determination process are as specified in the First Schedule.

P.U. (B) 388 5

Reasons for affirmative final determination 3.

The reasons for the affirmative final determination are as follows:

(a)

the export price of the subject merchandise is less than its normal value;

(b)

the domestic industry in Malaysia producing the like product has suffered material injury that can be reasonably linked to the importation of the subject merchandise into Malaysia; and

(c)

dumping margin is found to exist through the dumping activities by the producers or exporters from the People’s Republic of China, the Republic of Korea and the Socialist Republic of Viet Nam as specified in the First Schedule.

Anti-dumping duties 4.

The anti-dumping duties to be imposed on the producers or exporters as specified in the First Schedule shall be as specified in the Second Schedule.

Reason for the imposition of anti-dumping duties 5.

The reason for the imposition of anti-dumping duties under paragraph 4 is to prevent the injury to the domestic industry in Malaysia producing the like product.

Period for the imposition of anti-dumping duties 6.

The anti-dumping duties imposed under paragraph 4 shall apply for a period of five years from 1 November 2025 to 31 October 2030.

P.U. (B) 388 6

Schedule

JADUAL PERTAMA/FIRST SCHEDULE

[Perenggan 2, 3 dan 4/Paragraphs 2, 3 and 4]

MARGIN LAMBAKAN OLEH PENGELUAR ATAU PENGEKSPORT/

DUMPING MARGIN BY PRODUCERS OR EXPORTERS

Negara/

Country

Pengeluar atau Pengeksport/

Producers or Exporters

Margin Lambakan/

Dumping Margin

Republik

Rakyat China/

The People’s Republic of China

Shougang Jingtang United Iron &

Steel Co., Ltd.

7.72%

Lain-lain/Others 26.80%

Republik Korea/

The Republic of Korea

Hyundai Steel Company 5.61%

KG Dongbu Steel Co., Ltd.

13.82%

2.

POSCO

21%

Lain-lain/Others 31.47%

Republik Sosialis

Viet Nam/

The Socialist

Republic of Viet Nam

China Steel and Nippon Steel Vietnam

Joint Stock Company 4.76%

Southern Steel Sheet Co., Ltd.

9.91%

Tan Phuoc Khanh Trading and

Manufacturing Coil Steel Joint

Stock Company 48.05%

Tay Nam Steel Manufacturing &

Trading Co., Ltd.

42.58%

TVP Steel Joint Stock Company 42.58%

Lain-lain/Others 57.90%

P.U. (B) 388 7

Schedule

JADUAL KEDUA/SECOND SCHEDULE

[Perenggan 4/Paragraph 4]

DUTI ANTI-LAMBAKAN/ANTI-DUMPING DUTIES

Negara/

Country

Pengeluar atau Pengeksport/

Producers or Exporters

Kadar Duti

(Peratusan (%)

daripada Nilai Kos,

Insurans dan

Tambang (KIT))/

Rate of Duty

[Percentage (%) of the Cost, Insurance and Freight

(CIF) Value]

Republik

Rakyat China/

The People’s

Republic of China

Shougang Jingtang United Iron &

Steel Co., Ltd.

7.72%

Lain-lain/Others 26.80%

Republik Korea/

The Republic of

Korea

Hyundai Steel Company 5.61%

KG Dongbu Steel Co., Ltd.

13.82%

2.

POSCO

21%

Lain-lain/Others 31.47%

Republik Sosialis

Viet Nam/

The Socialist

Republic of Viet Nam

China Steel and Nippon Steel Vietnam

Joint Stock Company 4.76%

Southern Steel Sheet Co., Ltd.

9.91%

Tan Phuoc Khanh Trading and

Manufacturing Coil Steel Joint

Stock Company 48.05%

Tay Nam Steel Manufacturing &

Trading Co., Ltd.

42.58%

TVP Steel Joint Stock Company 42.58%

Lain-lain/Others 57.90%

Bertarikh 24 Oktober 2025

Dated 24 October 2025

[MITI.S.600-2/2/32; PN(PU2)529/JLD.34]

TENGKU DATUK SERI UTAMA ZAFRUL BIN TENGKU ABDUL AZIZ

Menteri Pelaburan, Perdagangan dan Industri/

Minister of Investment, Trade and Industry