The full official text, structured for quick navigation. Copy any provision or jump straight to a section.
Notis Penentuan Muktamad Afirmatif Penyiasatan Duti Anti-Lambakan Mengenai Import Keluli Aloi dan Bukan Aloi Gegelung Gulungan Sejuk yang B... is Malaysia P.U. (B), cited as P.U. (B) 229 2016, currently marked in force and first recorded in 2016.
WARTA KERAJAAN PERSEKUTUAN
FEDERAL GOVERNMENT
GAZETTE
NOTIS PENENTUAN MUKTAMAD AFIRMATIF
PENYIASATAN DUTI ANTI-LAMBAKAN MENGENAI
IMPORT KELULI ALOI DAN BUKAN ALOI GEGELUNG
GULUNGAN SEJUK YANG BERASAL ATAU DIEKSPORT
DARI REPUBLIK RAKYAT CHINA, REPUBLIK KOREA DAN
NOTICE OF AFFIRMATIVE FINAL DETERMINATION OF AN
ANTI-DUMPING DUTY INVESTIGATION WITH REGARD TO
THE IMPORTS OF COLD ROLLED COILS OF ALLOY AND
NON-ALLOY STEEL ORIGINATING OR EXPORTED FROM
THE PEOPLE’S REPUBLIC OF CHINA, REPUBLIC OF KOREA
AND SOCIALIST REPUBLIC OF VIET NAM
DISIARKAN OLEH/
JABATAN PEGUAM NEGARA/
ATTORNEY GENERAL’S CHAMBERS
2
AKTA DUTI TIMBAL BALAS DAN ANTI-LAMBAKAN 1993
NOTIS PENENTUAN MUKTAMAD AFIRMATIF PENYIASATAN DUTI ANTI-LAMBAKAN
MENGENAI IMPORT KELULI ALOI DAN BUKAN ALOI GEGELUNG GULUNGAN SEJUK
YANG BERASAL ATAU DIEKSPORT DARI REPUBLIK RAKYAT CHINA, REPUBLIK KOREA
DAN REPUBLIK SOSIALIS VIET NAM
(AD 03/15)
Opening note
suatu margin lambakan wujud mengenai dagangan subjek yang merupakan keluli aloi dan bukan aloi gegelung gulungan sejuk yang mempunyai ketebalan antara 0.20 milimeter hingga 2.60 milimeter dan kelebaran antara 700 milimeter hingga 1,300 milimeter yang dikelaskan di bawah Kod Sistem yang Diharmonikan (Kod H.S.) 7209.15 000,
16 000, 7209.17 000, 7209.18 290, 7209.18 900 dan 7225.50 000
dan Tatanama Tarif Berharmonis ASEAN (AHTN) 7209.15.00 00,
16.00 00, 7209.17.00 00, 7209.18.99 20, 7209.18.99 90,
50.10 00 dan 7225.50.90 00 yang berasal atau dieksport dari
Republik Rakyat China, Republik Korea dan Republik Sosialis Viet Nam tidak termasuk plat hitam kilang timah dan dagangan subjek yang diimport bagi maksud penggunaan akhir automotif daripada semua gred dan spesifikasi; dan
kemudaratan didapati wujud kerana industri dalam negeri di Malaysia yang mengeluarkan keluaran serupa telah mengalami kemudaratan material disebabkan oleh pengimportan dagangan subjek ke dalam
Malaysia.
3
Sebab bagi penentuan muktamad afirmatif
Sebab bagi penentuan muktamad afirmatif adalah seperti yang berikut:
industri dalam negeri di Malaysia yang mengeluarkan keluaran serupa telah mengalami kemudaratan material yang boleh dengan semunasabahnya dikaitkan dengan pengimportan dagangan subjek ke dalam Malaysia; dan
margin lambakan didapati wujud melalui kegiatan lambakan oleh pengeluar atau pengeksport dari Republik Rakyat China, Republik Korea dan Sosialis
Negara
Pengeluar/Pengeksport
Margin lambakan
Republik
Rakyat
China
Bengang Steel Plates Co., Ltd.
Jiangsu Shagang International
Trade Co., Ltd.
Lain-lain
61%
44%
78%
55%
64%
Republik
Sosialis
Viet Nam
China Steel Sumikin Viet Nam
Joint Stock Company
Lain-lain 13.68%
06%
68%.
4
Duti anti-lambakan
Duti anti-lambakan yang akan dikenakan adalah sebagaimana yang dinyatakan dalam Jadual.
Sebab bagi pengenaan duti anti-lambakan
Sebab bagi pengenaan duti anti-lambakan dalam perenggan 2 adalah untuk mencegah kemudaratan kepada industri dalam negeri di Malaysia yang mengeluarkan keluaran serupa.
Tempoh pengenaan duti anti-lambakan
Duti anti-lambakan yang dikenakan dalam perenggan 2 hendaklah terpakai bagi tempoh lima tahun mulai 24 Mei 2016 hingga 23 Mei 2021.
JADUAL
[Perenggan 2]
DUTI ANTI-LAMBAKAN
No.
Negara
Pengeluar/Pengeksport
Kadar Duti
(Peratusan (%)
daripada Nilai Kos,
Insurans dan
Tambang (KIT))
1.
Republik Rakyat
China
Bengang Steel Plates Co., Ltd.
Jiangsu Shagang International
Trade Co., Ltd.
Lain-lain 5.61%
13.44%
23.78%
5
2.
Hyundai Steel Company
Lain-lain 3.78%
11.55%
21.64%
3.
Republik Sosialis
Viet Nam
China Steel Sumikin Viet Nam
Joint Stock Company
Lain-lain 13.68%
3.06%
13.68%
Bertarikh 17 Mei 2016
[MITI:ID/(S/AP/AD/045/42); PN(PU2)647/V]
DATO’ SRI MUSTAPA BIN MOHAMED
Menteri Perdagangan Antarabangsa dan Industri
6
COUNTERVAILING AND ANTI-DUMPING DUTIES ACT 1993
NOTICE OF AFFIRMATIVE FINAL DETERMINATION OF AN ANTI-DUMPING DUTY
INVESTIGATION WITH REGARD TO THE IMPORTS OF COLD ROLLED COILS OF ALLOY
AND NON-ALLOY STEEL ORIGINATING OR EXPORTED FROM THE PEOPLE’S REPUBLIC
OF CHINA, REPUBLIC OF KOREA AND SOCIALIST REPUBLIC OF VIET NAM
(AD 03/15)
IN exercise of the powers conferred by paragraph 25(4)(a) of the Countervailing and
Anti-Dumping Duties Act 1993 [Act 504] and regulation 15 of the Countervailing and
Anti-Dumping Duties Regulations 1994 [P.U.
233/1994], the Government has made a final determination under subsection 25(1) of the Act that—
(a)
a dumping margin exists with regard to the subject merchandise which are the imports of cold rolled coils of alloy and non-alloy steel of a thickness between 0.20 millimetres to 2.60 millimetres and width between 700 millimetres to 1,300 millimetres classified under the
Harmonised System Code (H.S. Code) 7209.15 000, 7209.16 000,
7209.17 000, 7209.18 290, 7209.18 900 and 7225.50 000 and ASEAN
Harmonised Tariff Nomenclature (AHTN) 7209.15.00 00, 7209.16.00 00,
7209.17.00 00, 7209.18.99 20, 7209.18.99 90, 7225.50.10 00 and 7225.50.90 00 originating or exported from the People’s Republic of
China, Republic of Korea and Socialist Republic of Viet Nam excluding tin mill black plate and subject merchandise imported for the purpose of automotive end-usage of all grades and specifications; and
(b)
an injury is found to exist because the domestic industry in Malaysia producing the like product has suffered material injury by reason of the importation of the subject merchandise into Malaysia.
7
Reasons for affirmative final determination
1. The reasons for the affirmative final determination are as follows:
(a)
the export price of the subject merchandise is less than its normal value;
(b)
the domestic industry in Malaysia producing the like product has suffered material injury that can be reasonably linked to the importation of the subject merchandise into Malaysia; and
(c)
the dumping margin is found to exist through the dumping activities by the producers or exporters from the People’s Republic of China, Republic of
Korea and Socialist Republic of Viet Nam which are as follows:
Countries
Producers/Exporters
Dumping margin
(i)
People’s
Republic of
China
Bengang Steel Plates Co., Ltd.
Jiangsu Shagang International
Trade Co., Ltd.
Others 5.61%
13.44%
23.78%
(ii)
Republic of
Korea
Hyundai Steel Company
Others 3.78%
11.55%
21.64%
Socialist
Republic of
Viet Nam
China Steel Sumikin Viet Nam
Joint Stock Company
Others 13.68%
3.06%
13.68%.
Anti-dumping duties 2.
The anti-dumping duties to be imposed shall be as specified in the Schedule.
8
Reason for imposition of anti-dumping duties 3.
The reason for the imposition of anti-dumping duties in paragraph 2 is to prevent the injury to the domestic industry in Malaysia producing the like product.
Period of imposition of anti-dumping duties 4.
The anti-dumping duties imposed in paragraph 2 shall apply for a period of five years from 24 May 2016 to 23 May 2021.
[Paragraph 2]
ANTI-DUMPING DUTIES
No.
Countries
Producers/Exporters
Rate of Duties
(Percentage (%) of the Cost, Insurance and Freight (CIF)
Value)
1.
People’s Republic of
China
Bengang Steel Plates Co., Ltd
Jiangsu Shagang International
Trade Co., Ltd.
Others 5.61%
13.44%
23.78%
2.
Republic of Korea
Hyundai Steel Company
Others 3.78%
11.55%
21.64%
3.
Socialist Republic of
Viet Nam
China Steel Sumikin Viet Nam
Joint Stock Company
Others 13.68%
3.06%
13.68%
9
Dated 17 May 2016
[MITI:ID/(S/AP/AD/045/42); PN(PU2)647/V]
DATO’ SRI MUSTAPA BIN MOHAMED
Minister of International Trade and Industri
If one provision's text doesn't match the official source, use Suggest a fix beside that provision — it opens an editor next to the source document. For anything else — a missing amendment, a broken link, out-of-date content, or a removal request — report it here.