/akn/my/act/pub/2018/67
The full official text, structured for quick navigation. Copy any provision or jump straight to a section.
Quick answer
NOTIS PENENTUAN MUKTAMAD AFIRMATIF PENYIASATAN DUTI ANTI-LAMBAKAN MENGENAI IMPORT KELULI TAHAN KARAT GULUNGAN SEJUK DALAM BENTUK GEGELUNG,... is Malaysia P.U. (B), cited as P.U. (B) 67 2018, currently marked in force and first recorded in 2018.
Opening note
suatu margin lambakan wujud mengenai import keluli tahan karat gulungan sejuk dalam bentuk gegelung, kepingan atau apa-apa bentuk lain dengan ketebalan antara 0.3 milimeter hingga 6.5 milimeter dan kelebaran tidak lebih daripada 1,600 milimeter tidak termasuk—
keluli tahan karat gulungan sejuk dengan kemasan sepuh lindap berkilat (BA), No. 8 (Kemasan Cermin), timbul, keras, gores atau berwarna; atau
keluli tahan karat gulungan sejuk dengan nilai kekerasan melebihi 250HV, yang dikelaskan di bawah Kod Sistem yang Diharmonikan (Kod H.S.) dan
Tatanama
Tarif
Berharmonis
ASEAN
(AHTN)
31.00 00,
20.10 00 dan 7220.20.90 00 yang berasal atau dieksport dari
Republik Rakyat China, Republik Korea, Chinese Taipei dan Thailand
(“dagangan subjek”); dan 3
kemudaratan didapati wujud kerana industri dalam negeri di Malaysia yang mengeluarkan keluaran serupa telah mengalami kemudaratan material disebabkan oleh pengimportan dagangan subjek ke dalam Malaysia.
Sebab-sebab bagi penentuan muktamad afirmatif 2.
Sebab bagi penentuan muktamad afirmatif adalah seperti yang berikut:
industri dalam negeri di Malaysia yang mengeluarkan keluaran serupa telah mengalami kemudaratan material yang boleh dengan semunasabahnya dikaitkan dengan pengimportan dagangan subjek ke dalam Malaysia; dan
margin lambakan didapati wujud melalui kegiatan lambakan oleh pengeluar atau pengeksport dari Republik Rakyat China, Republik Korea, Chinese
Taipei dan Thailand seperti yang berikut:
Negara
Pengeluar/Pengeksport
Margin
Lambakan
Republik
Rakyat
China
Shanxi Taigang Stainless Steel Co., Ltd.
Lain-lain
68%
95%
Republik
Korea
Hyundai BNG Steel Co., Ltd.
Hyundai Steel Company
Lain-lain
-3.61%
57%
44%
27%
Chinese
Taipei
Chia Far Industrial Factory Co., Ltd.
Tang Eng Iron Works Co., Ltd.
Walsin Lihwa Corporation
Yieh United Steel Corporation
-2.29%
78%
79%
-8.38%
4
Lain-lain
02%
Thailand
Lain-lain 22.86%
61%
Duti anti-lambakan 3.
Duti anti-lambakan yang akan dikenakan adalah sebagaimana yang dinyatakan dalam Jadual.
Sebab bagi pengenaan duti anti-lambakan 4.
Sebab bagi pengenaan duti anti-lambakan dalam perenggan 2 adalah untuk mencegah kemudaratan kepada industri dalam negeri di Malaysia yang mengeluarkan keluaran serupa.
Tempoh pengenaan duti anti-lambakan 5.
Duti anti-lambakan yang dikenakan dalam perenggan 2 hendaklah terpakai bagi tempoh lima tahun mulai 8 Februari 2018 hingga 7 Februari 2023.
JADUAL
[Perenggan 2]
DUTI ANTI-LAMBAKAN
Negara
Pengeluar/Pengeksport
Kadar Duti
(Peratusan (%)
daripada
Nilai Kos,
Insurans dan
Tambang (KIT))
1.
Republik
Rakyat China
Shanxi Taigang Stainless Steel Co., Ltd.
Lain-lain
2.68%
23.95%
2.
Hyundai BNG Steel Co., Ltd.
Hyundai Steel Company
Nil
Nil
5
Lain-lain
4.44%
7.27%
3.
Chinese Taipei
Chia Far Industrial Factory Co., Ltd.
Tang Eng Iron Works Co., Ltd.
Walsin Lihwa Corporation
Yieh United Steel Corporation
Lain-lain
Nil 7.78%
2.79%
Nil 14.02%
4.
Thailand
Lain-lain 22.86%
111.61%
Bertarikh 5 Februari 2018
[MITI:ID/(S)/AP/AD/045/35-AR Jld.3; PN(PU2)529/XXIII]
DATO’ SRI MUSTAPA BIN MOHAMED
Menteri Perdagangan Antarabangsa dan Industri
6
COUNTERVAILING AND ANTI-DUMPING DUTIES ACT 1993
NOTICE OF AFFIRMATIVE FINAL DETERMINATION OF AN ANTI-DUMPING DUTY
INVESTIGATION WITH REGARD TO THE IMPORTS OF COLD ROLLED STAINLESS STEEL
IN COILS, SHEETS OR ANY OTHER FORM ORIGINATING OR EXPORTED FROM THE
PEOPLE’S REPUBLIC OF CHINA, THE REPUBLIC OF KOREA,
CHINESE TAIPEI AND THE KINGDOM OF THAILAND
(AD 01/17)
IN exercise of the powers conferred by paragraph 25(4)(a) of the Countervailing and
Anti-Dumping Duties Act 1993 [Act 504] and regulation 15 of the Countervailing and
Anti-Dumping Duties Regulations 1994 [P.U. (A) 233/1994], the Government has made a final determination under subsection 25(1) of the Act that—
(a)
a dumping margin exists with regard to the imports of cold rolled stainless steel in coils, sheets or any other form with the thickness of between 0.3 millimetres to 6.5 millimetres and width of not more than 1,600 millimetres excluding—
(i)
cold rolled stainless steel with bright annealed (BA), No. 8
(Mirror Finish), embossed, rigidised, etched or coloured finishes; or
(ii)
cold rolled stainless steel with hardness value of more than 250HV, classified under the Harmonised System Code (H.S. Code) and ASEAN
Harmonised Tariff Nomenclature (AHTN) 7219.31.00 00, 7219.32.00 00,
7219.33.00 00,
7219.34.00 00,
7219.35.00 00,
7220.20.10 00
and 7220.20.90 00 originating or exported from the People’s Republic of
China, the Republic of Korea, Chinese Taipei and the Kingdom of Thailand
(“subject merchandise”); and
7
(b)
an injury is found to exist because the domestic industry in Malaysia producing the like product has suffered a material injury by reason of the importation of the subject merchandise into Malaysia.
Reasons for affirmative final determination 2.
The reasons for the affirmative final determination are as follows:
(a)
the export price of the subject merchandise is less than its normal value;
(b)
the domestic industry in Malaysia producing the like product has suffered material injury that can be reasonably linked to the importation of the subject merchandise into Malaysia; and
(c)
the dumping margin is found to exist through the dumping activities by the producers or exporters from the
People’s
Republic of
China, the Republic of Korea, Chinese Taipei and the Kingdom of Thailand which are as follows:
Country
Producer/Exporter
Dumping
Margin 1.
People’s
Republic of
China
Shanxi Taigang Stainless Steel Co., Ltd.
Others
2.68%
23.95%
2.
Republic of
Korea
Hyundai BNG Steel Co., Ltd.
Hyundai Steel Company
Others
-3.61%
0.57%
4.44%
7.27%
8
3.
Chinese Taipei
Chia Far Industrial Factory Co., Ltd.
Tang Eng Iron Works Co., Ltd.
Walsin Lihwa Corporation
Yieh United Steel Corporation
Others
-2.29%
7.78%
2.79%
-8.38%
14.02%
4.
Kingdom of
Thailand
Others
22.86%
111.61%
Anti-dumping duties 3.
The anti-dumping duties to be imposed shall be as specified in the Schedule.
Reason for imposition of anti-dumping duties 4.
The reason for the imposition of anti-dumping duties in paragraph 2 is to prevent the injury to the domestic industry in Malaysia producing the like product.
Period of imposition of anti-dumping duties 5.
The anti-dumping duties imposed in paragraph 2 shall apply for a period of five years from 8 February 2018 to 7 February 2023.
[Paragraph 2]
ANTI-DUMPING DUTY
Country
Producer/Exporter
Rate of Duty
(Percentage (%) of the Cost, Insurance and Freight (CIF)
Value)
1.
People’s
Republic of
China
Shanxi Taigang Stainless Steel Co., Ltd.
Others
2.68%
23.95%
9
2.
Republic of
Korea
Hyundai BNG Steel Co., Ltd.
Hyundai Steel Company
Others
Nil
Nil 4.44%
7.27%
3.
Chinese Taipei
Chia Far Industrial Factory Co., Ltd.
Tang Eng Iron Works Co., Ltd.
Walsin Lihwa Corporation
Yieh United Steel Corporation
Others
Nil 7.78%
2.79%
Nil 14.02%
4.
Kingdom of
Thailand
Others 22.86%
111.61%
Dated 5 February 2018
[MITI:ID/(S)/AP/AD/045/35-AR Jld.3; PN(PU2)529/XXIII]
DATO’ SRI MUSTAPA BIN MOHAMED
Minister of International Trade and Industry