mylaw.my

/akn/my/act/pub/2012/246

PERISYTIHARAN PENENTUAN STANDARD

The full official text, structured for quick navigation. Copy any provision or jump straight to a section.

Open source PDF
Type
P.U. (B)
Status
In force
Enacted
2012
Sections
402

Quick answer

About this p.u. (b)

PERISYTIHARAN PENENTUAN STANDARD is Malaysia P.U. (B), cited as P.U. (B) 246 2012, currently marked in force and first recorded in 2012.

Opening note

Preamble

Suggest a correction
  1. PADA menjalankan kuasa yang diberikan oleh subseksyen 15(1) Akta Standard Malaysia 1996 [Akta 549], Menteri mengisytiharkan pemakaian penentuan yang disenaraikan dalam Jadual menjadi penentuan standard bagi maksud Akta ini. STANDARDS OF MALAYSIA ACT 1996 DECLARATION OF STANDARD SPECIFICATIONS

Opening note

Preamble

Suggest a correction
  1. IN exercise of the powers conferred by subsection 15(1) of the Standards of Malaysia Act 1996 [Act 549], the Minister declares the application of the specifications listed in the Schedule to be the standard specifications for the purpose of this Act. 3 JADUAL/SCHEDULE No. Nombor Penentuan Specification Number Bahagian Part Tahun Year Penentuan Specification

Seksyen 2

Determination of resistance to humid atmospheres containing sulfur dioxide

Open as pageSuggest a correction

Paints and varnishes - Determination of resistance to cyclic corrosion conditions -

Part F19: Wet (salt fog)/dry/humidity/UV light

Seksyen 3

Part F20 2008

Open as pageSuggest a correction

Paints and varnishes - Determination of resistance to filiform corrosion - Part F20:

Seksyen 4

Aluminium substrates

Open as pageSuggest a correction

Paints and varnishes - Determination of resistance to humidity - Part F21:

Seksyen 5

Procedure for exposing test specimens in condensation - Water atmospheres

Open as pageSuggest a correction

Paints and varnishes

-

Part

G7:

Seksyen 6

Determination of the effect of heat

Open as pageSuggest a correction

Paints and varnishes - Determination of resistance to liquids - Part G8: Water immersion method

Seksyen 7

Part G9 2008

Open as pageSuggest a correction

Paints and varnishes - Determination of water-vapour transmission rate - Part G9:

Seksyen 8

Dish method for free films

Open as pageSuggest a correction

Paints and varnishes - Determination of resistance to liquids - Part G10: Method using an absorbent medium

Seksyen 10

Paints and varnishes - Determination of resistance to liquids - Part G11: Spotting methods

Open as pageSuggest a correction

Paints and varnishes - Determination of resistance to liquids

-

Part

G12:

Temperature-gradient oven method

4

Seksyen 11

Part H6 2008

Open as pageSuggest a correction

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part H6: Assessment of degree of chalking by tape method

Seksyen 12

Part H7 2008

Open as pageSuggest a correction

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part H7: Assessment of degree of chalking by velvet method

Seksyen 13

Part H8 2008

Open as pageSuggest a correction

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part H8: Assessment of degree of delamination and corrosion around a scribe

Seksyen 14

Part H10 2008

Open as pageSuggest a correction

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part H10: Assessment of degree of filiform corrosion

Seksyen 15

Part J1 2008

Open as pageSuggest a correction

Paints and varnishes - Coating powders -

Part J1: Determination of particle size distribution by sieving

Seksyen 16

Part J2 2008

Open as pageSuggest a correction

Paints and varnishes - Coating powders -

Part J2: Determination of density by gas comparison pyknometer (referee method)

Seksyen 17

Part J3 2008

Open as pageSuggest a correction

Paints and varnishes - Coating powders -

Part J3: Determination of density by liquid displacement pyknometer

Seksyen 18

Part J4 2008

Open as pageSuggest a correction

Paints and varnishes - Coating powders -

Part J4: Calculation of lower explosion limit

Seksyen 19

Part J5 2008

Open as pageSuggest a correction

Paints and varnishes - Coating powders -

Part J5: Determination of flow properties of a powder/air mixture

5

Seksyen 20

Part J6 2008

Open as pageSuggest a correction

Paints and varnishes - Coating powders -

Part J6: Determination of gel time of thermosetting coating powders at a given temperature

Seksyen 21

Part J7 2008

Open as pageSuggest a correction

Paints and varnishes - Coating powders -

Part J7: Determination of loss of mass on stoving

Seksyen 22

Part J8 2008

Open as pageSuggest a correction

Paints and varnishes - Coating powders -

Part J8: Assessment of the storage stability of thermosetting powders

Seksyen 24

Part J10 2008

Open as pageSuggest a correction

Paints and varnishes - Coating powders -

Part J10: Determination of deposition efficiency

Seksyen 26

Part J12 2008

Open as pageSuggest a correction

Paints and varnishes - Coating powders -

Part J12: Determination of compatibility

Seksyen 27

Part J13 2008

Open as pageSuggest a correction

Paints and varnishes - Coating powders -

Part J13: Particle size analysis by laser diffraction

Bahagian

Part 2 2008

Code of practice for the design of road lighting - Part 2: Lighting of tunnels

Bahagian

Part 3 2008

Polyethylene (PE) piping systems for gaseous fuels supply - Part 3: Fittings

Bahagian

Part 4 2008

Polyethylene (PE) piping systems for gaseous fuels supply - Part 4: Valves

Bahagian

Part 5 2008

Polyethylene (PE) piping systems for gaseous supply - Part 5: Fitness for purpose of the system

Bahagian

Part 6 2008

Polyethylene (PE) piping systems for gaseous supply - Part 6: Guidance for the assessment of conformity

Suggest a correction

6

Bahagian

Part 1 2008

Chlorinated poly (vinyl chloride) (PVC-C)

Suggest a correction

plastic piping systems

-

Bahagian

Part 1:

Bahagian

Part 2:

Specification for schedule 40 socket-type pipe fittings

Bahagian

Part 3:

Specification for schedule 80 pipe fittings

Seksyen 38

Specification

Open as pageSuggest a correction

2008

Anhydrous milk fat - Determination of sterol composition by gas liquid chromatography (reference method)

Seksyen 42

Paper - Determination of zinc and cadmium

Open as pageSuggest a correction

2008

Structural timber grading - Requirements for machine strength graded timber and grading machine

Seksyen 44

Cranes - Safety - Tower cranes

Open as pageSuggest a correction

2008

Globally harmonised system (GHS) for classification and labelling of chemicals -

Specification for the classification, labelling and formulation of safety data sheet for chemical products

Seksyen 46

MS 1965

Open as pageSuggest a correction

Information technology

Suggest a correction

-

Software measurement

-

Functional size measurement - Part 6: Guide for use of

ISO/IEC

14143

series and related international standards

Seksyen 48

Open as pageSuggest a correction

Section 1 2008

Suggest a correction

Manual of tests and criteria for transport of dangerous goods - Part 2: Classification procedures, test methods and criteria relating to explosives of Class 1 - Section 1: Introduction to Part 2 - Purpose, scope, acceptance procedure, assignment procedure, example of test report

Seksyen 49

Open as pageSuggest a correction

Section 2 2008

Suggest a correction

Manual of tests and criteria for transport of dangerous goods - Part 2: Classification procedures, test methods and criteria relating to explosives of class 1- Section 2:

Test Series 1

Seksyen 50

Open as pageSuggest a correction

Section 3 2008

Suggest a correction

Manual of tests and criteria for transport of dangerous goods - Part 2: Classification procedures, test methods and criteria relating to explosives of class 1 - Section 3:

Test series 2

Seksyen 54

Code of practice for good engineering maintenance management of active medical devices

Open as pageSuggest a correction

2008

Medical laboratories

-

Guidance on laboratory implementation of MS ISO

15189:2004

Seksyen 58

Test method for hydrogen sulfide in liquefied petroleum (LP) gases (lead acetate method)

Open as pageSuggest a correction

2008

Seksyen 60

Test method for density or relative density of light hydrocarbons by pressure hydrometer

Open as pageSuggest a correction

2008

Test method for determination of total volatile sulfur in gaseous hydrocarbons and liquefied petroleum gases by ultraviolet fluorescence

Seksyen 61

MS 2067

Open as pageSuggest a correction

2008

Test method for vapor pressure of liquefied petroleum gases

(LPG)

(expansion method)

Seksyen 64

Practice for determination of volatiles in polymers by static headspace gas chromatography

Open as pageSuggest a correction

Scheduled waste - Sampling technical guide - Part 2: Description of media and device selection guide

Seksyen 70

Practice for sampling with a composite liquid waste sampler (COLIWASA)

Open as pageSuggest a correction

2008

Practice for sampling with a scoop

9

Seksyen 72

Practice for sampling with a dipper or pond sampler

Open as pageSuggest a correction

2008

Practice for sampling single or multilayered liquids, with or without solids, in drums or similar containers

Seksyen 76

Road vehicles - Rear underrun protective devices (RUPDs)

Open as pageSuggest a correction

2008

Road vehicles

- Braking systems

-

Seksyen 78

Wood-to-wood adhesive bonds - Determination of shear strength by tensile loading

Open as pageSuggest a correction

2008

Adhesives

-

Seksyen 79

Wood-to-wood adhesive bonds - Determination of shear strength by compressive loading

Open as pageSuggest a correction

2008

Domestic and similar electronic equipment interconnection requirements

- Peritelevision connector

Seksyen 80

MS 2086

Open as pageSuggest a correction

2008

Plastic tubings and hoses for use with commercial propane, commercial butane and their mixtures in the vapour phase-requirements for plastic tubings and hoses

Seksyen 83

Test method for susceptibility of polyethylene bottles to soot accumulation

Open as pageSuggest a correction

2008

Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications

-

Test methods for leaktightness of elastomeric sealing ring type joints

10

Seksyen 84

MS 2090

Open as pageSuggest a correction

2008

Thermoplastics piping systems - End-load-bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust

Seksyen 86

Specification for cautionary labelling for five-gallon open-head plastics containers

Open as pageSuggest a correction

2008

Test method for determination of residual acetaldehyde in polyethylene terephthalate bottle polymer using an automated static head-space sampling device and a capillary GC with a flame ionisation detector

Seksyen 88

Cranes and lifting appliances - Selection of wire ropes - Part 1: General

Open as pageSuggest a correction

2008

Information supplied by the manufacturer with in vitro diagnostic reagents for professional use

Bahagian

Part 7 2008

Personal flotation devices - Part 7:

Suggest a correction

Materials and components

-

Safety requirements and test methods

Bahagian

Part 8 2008

Personal flotation devices - Part 8:

Suggest a correction

Accessories - Safety requirements and test methods

Bahagian

Part 9 2008

Personal flotation devices - Part 9: Test methods

Bahagian

Part 10 2008

Personal flotation devices - Part 10:

Suggest a correction

Selection and application of personal flotation devices and other relevant devices

Seksyen 101

Austenitic cast irons - Classification

Open as pageSuggest a correction

2008

Oil palm clones for commercial planting -

specification for ortet selection

Bahagian

Bahagian 1 2008

Barang gunaan Islam - Bahagian 1:

Suggest a correction

Kosmetik dan dandanan diri - Garis panduan umum

Bahagian

Part 1: Suspended baskets

Seksyen 110

Adhesives - General testing methods

Open as pageSuggest a correction

2008

Animal and vegetable fats and oils -

Determination of oxidative stability

(accelerated oxidation test)

12

Seksyen 111

MS 300 113

Open as pageSuggest a correction

Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech)

Suggest a correction

using constant or non-constant envelope modulation and having an antenna connector;

Technical characteristics and methods of measurement

Seksyen 112

MS 300 135

Open as pageSuggest a correction

Electromagnetic compatibility and radio spectrum matters

Suggest a correction

(ERM);

Angle-modulated citizens band radio equipment

(CEPT PR 27 Radio Equipment); Part 1:

Technical characteristics and methods of measurement

Seksyen 113

MS 300 220

Open as pageSuggest a correction

Electromagnetic compatibility and radio spectrum matters (ERM); Short range devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical...

Seksyen 114

MS 300 224

Open as pageSuggest a correction

Electromagnetic compatibility and radio spectrum matters (ERM); On-site paging service; Part 1: Technical and functional characteristics, including test methods

Seksyen 115

MS 300 328

Open as pageSuggest a correction

2008

Electromagnetic compatibility and radio spectrum matters

(ERM);

Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques, harmonized

EN covering essential requirements under Article 3.2

of the R&TTE directive

Seksyen 116

MS 300 330

Open as pageSuggest a correction

Electromagnetic compatibility and radio spectrum matters (ERM); Short range devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 1...

Suggest a correction

13

Seksyen 117

MS 300 390

Open as pageSuggest a correction

Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service, Radio equipment intended for the transmission of data (and speech) and using an integral antenna;

Technical characteristics and test conditions

Seksyen 118

MS 300 433

Open as pageSuggest a correction

Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Double side band (DSB) and/or single side band

Suggest a correction

(SSB)

amplitude modulated citizen’s band radio equipment;

Technical characteristics and methods of measurement

Seksyen 119

MS 300 440

Open as pageSuggest a correction

Electromagnetic compatibility and radio spectrum matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range;

Bahagian

Part 1: Technical characteristics and test methods

Seksyen 120

MS 301 893

Open as pageSuggest a correction

2008

Broadband radio access networks

(BRAN); 5 GHz high performance RLAN;

Harmonized

Seksyen 121

EN covering essential requirements of Article 3.2 of the R&TTE directive

Open as pageSuggest a correction

Electromagnetic compatibility and radio spectrum matters (ERM); Radio frequency identification equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W; Part 1: Technical requirements and methods o...

Seksyen 122

MS 62102

Open as pageSuggest a correction

Electrical safety

-

Classification of interfaces for equipment to be connected to information and communications technology network

Seksyen 123

MS 62367

Open as pageSuggest a correction

Safety aspects for XDSL signals on circuits connected to telecommunication networks (DSL: Digital Subscriber Line)

Bahagian

Part 2-1 2008

Environmental testing - Part 2-1: Tests-Tests A: Cold

Bahagian

Part 2-11 2008

Basic environmental testing procedures -

Bahagian

Part 2: Tests - Test Ka: Salt mist

Bahagian

Part 2-13 2008

Basic environmental testing procedures -

Bahagian

Part 2: Tests - Test M: Low air pressure

Bahagian

Part 2-14 2008

Basic environmental testing procedures -

Bahagian

Part 2: Tests - Test N: Change temperature

Bahagian

Part 2-17 2008

Basic environmental testing procedures -

Bahagian

Part 2-17: Tests - Test Q: Sealing

Bahagian

Part 2-18 2008

Environmental testing - Part 2-18: Tests -

Suggest a correction

Test R and guidance: Water

Bahagian

Part 2-21 2008

Environmental testing - Part 2-21: Test-Test U: Robustness of terminations and integral mounting devices

Bahagian

Part 2-27 2008

Environmental testing - Part 2-27: Tests -

Suggest a correction

Test Ea and guidance: Shock

Bahagian

Part 2-29 2008

Basic environmental testing procedures -

Bahagian

Part 2-29: Tests - Test Eb and guidance:

Bump

Bahagian

Part 2-30 2008

Environmental testing - Part 2-30: Tests -

Suggest a correction

Test Db: Damp heat, cyclic (12 h + 12 h cycle)

Bahagian

Part 2-39 2008

Basic environmental testing procedures -

Bahagian

Part 2: Tests - Test Z/AMD: Combined sequential cold, low air pressure, and damp heat test

Bahagian

Part 2-44 2008

Environmental testing - Part 2: Tests -

Suggest a correction

Guidance on test T: Soldering

15

Bahagian

Part 2-54 2008

Environmental testing - Part 2-54: Tests -

Suggest a correction

Test Ta: Solderability testing of electronic components by the wetting balance method

Bahagian

Part 2-58 2008

Environmental testing - Part 2-58: Tests -

Suggest a correction

Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices

Bahagian

Part 2-66 2008

Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)

Bahagian

Part 2-67 2008

Environmental testing - Part 2: Tests -

Suggest a correction

Test Cy: Damp heat, steady state, accelerated test primarily intended for components

Bahagian

Part 2-69 2008

Environmental testing - Part 2-69: Tests -

Suggest a correction

Test Te: Solderability testing of electronic components for surface mounting devices

(SMD) by the wetting balance method

Bahagian

Part 2-78 2008

Environmental testing - Part 2: Tests -

Suggest a correction

Test Cab: Damp heat, steady state

Bahagian

Part 3-1 2008

Basic environmental testing procedures -

Bahagian

Part 3: Background information - Section one: Cold and dry heat tests

Bahagian

Part 3-4 2008

Bahagian

Part 3-4:

Supporting documentation and guidance -

Suggest a correction

Damp heat tests

Seksyen 147

MS IEC

Open as pageSuggest a correction

60107

Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements at radio and video frequencies

Bahagian

Part 2-10 2008

Bahagian

Part 2-10:

Glowing/hot-wire based test methods -

Suggest a correction

Glow-wire apparatus and common test procedure

16

Bahagian

Part 2-8 2008

Automatic electrical controls for household and similar use - Part 2-8:

Suggest a correction

Particular requirements for electrically operated water valves, including mechanical requirements

Bahagian

Part 2-2 2008

Miscellaneous lampholders - Part 2:

Suggest a correction

Particular requirements - Connectors for led modules

Bahagian

Part 2-

2008

Suggest a correction

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2 -010: Particular requirements for laboratory equipment for the heating of materials

Seksyen 153

MS IEC

Open as pageSuggest a correction

61010

2008

Suggest a correction

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2 -020: Particular requirements for laboratory centrifuges

Seksyen 154

MS IEC

Open as pageSuggest a correction

61010

2008

Suggest a correction

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2 -032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

Seksyen 155

MS IEC

Open as pageSuggest a correction

61010

2008

Suggest a correction

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2 -051: Particular requirements for laboratory equipment for mixing and stirring

Seksyen 156

MS IEC

Open as pageSuggest a correction

61010

2008

Suggest a correction

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2 -081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes

Seksyen 158

MS IEC

Open as pageSuggest a correction

61540

2008

Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)

Seksyen 159

MS IEC

Open as pageSuggest a correction

61543

2008

Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility

Bahagian

Part 22 2008

Low-voltage surge protective devices -

Bahagian

Part 22:

Surge protective devices connected to telecommunications and signalling networks

Suggest a correction

-

Selection and application principles

Seksyen 162

Methods of measuring the performance

Open as pageSuggest a correction

62020

2008

Electrical accessories - Residual current monitors for household and similar uses

(RCMs)

Seksyen 164

Methods of measurement for the power consumption of audio, video and related equipment

Open as pageSuggest a correction

62271

Bahagian

Part 209 2008

High-voltage switchgear and controlgear -

Bahagian

Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable terminations

Seksyen 165

MS IEC

Open as pageSuggest a correction

62423

2008

Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B

Seksyen 168

MS ISO 148

Open as pageSuggest a correction

Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of charpy V reference test pieces for verification of test machines

Seksyen 169

MS ISO 216

Open as pageSuggest a correction

2008

Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction

Seksyen 170

MS ISO 1081

Open as pageSuggest a correction

2008

Belt drives - V-belts and V-ribbed belts, and corresponding grooved pulleys –

Seksyen 171

Vocabulary

Open as pageSuggest a correction

Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes

Seksyen 172

MS ISO 1628

Open as pageSuggest a correction

Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 4: Polycarbonate (PC)

Suggest a correction

moulding and extrusion materials

Seksyen 173

MS ISO 1628

Open as pageSuggest a correction

Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester

Suggest a correction

(TP)

homopolymers and copolymers

Bahagian

Part 6: Methyl methacrylate polymers

Seksyen 175

MS ISO 1872

Open as pageSuggest a correction

Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

Seksyen 178

MS ISO 2232

Open as pageSuggest a correction

2008

Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes – Specification

19

Seksyen 181

Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method)

Open as pageSuggest a correction

2008

Oil of lemongrass (Cymbopogon citratus) -

Seksyen 182

Specification

Open as pageSuggest a correction

2008

Oil of cananga [Cananga odorata (Lam.)

Hook. f. et Thomson, forma macrophylla] -

Seksyen 187

Oil of citronella, Java type - Specification

Open as pageSuggest a correction

2008

Oil of citronella,

Sri

Lanka type

(Cymbopogon nardus (L.) W. Watson var.

lenabatu Stapf.) - Specification

Seksyen 188

MS ISO 3994

Open as pageSuggest a correction

2008

Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials – Specification

Seksyen 190

Determination of permeability to gas

Open as pageSuggest a correction

2008

Rubber hoses and tubing for cooling systems for internal-combustion engines -

Seksyen 195

Air quality - General aspects - Units of measurement

Open as pageSuggest a correction

2008

Adhesives - Determination of tensile lap shear strength of rigid-to-rigid bonded assemblies

Seksyen 198

Oil of Melaleuca, terpinen-4-ol type (Tea tree oil) – Specification

Open as pageSuggest a correction

2008

Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a nonpetroleum base hydraulic brake fluid (service temperature 120 °C max.)

Seksyen 199

MS ISO 4930

Open as pageSuggest a correction

2008

Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid

(service temperature 150 °C max.)

Bahagian

Part 1: Schopper-Riegler method

Seksyen 207

Oropharyngeal airways

Open as pageSuggest a correction

2008

Breathing tubes intended for use with anaesthetic apparatus and ventilators

21

Seksyen 209

Determination of piperine content - Spectrophotometric method

Open as pageSuggest a correction

2008

Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a nonpetroleum base hydraulic brake fluid (service temperature 70 °C max.)

Seksyen 210

MS ISO 6119

Open as pageSuggest a correction

2008

Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid

(service temperature 120 °C max.)

Seksyen 213

Flat pallets for intercontinental materials handling - Principal dimensions and tolerances

Open as pageSuggest a correction

2008

Road vehicles - Collision classification –

Bahagian

Part 6:

Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to

Suggest a correction

C8 hydrocarbons using three capillary columns

Seksyen 218

Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum

Open as pageSuggest a correction

2008

Seksyen 223

Lists of equivalent terms and vocabulary

Open as pageSuggest a correction

2008

Plastics hose - General-purpose collapsible water hose, textile-reinforced

-

Seksyen 226

Rubber and plastics hoses - Determination of adhesion between components

Open as pageSuggest a correction

2008

Optics and photonics - Microscopes -

Seksyen 228

Determination of transmission of liquids through hose and tubing walls

Open as pageSuggest a correction

2008

Oxygen concentrators for medical use -

Seksyen 232

Hexagon head bolts with metric fine pitch thread - Product grades A and B

Open as pageSuggest a correction

Paper and board - Determination of roughness/smoothness (air leak methods)

Suggest a correction

- Part 4: Print-surf method

Seksyen 238

MS ISO 9169

Open as pageSuggest a correction

2008

Air quality - Definition and determination of performance characteristics of an automatic measuring system

Seksyen 241

MS ISO 9334

Open as pageSuggest a correction

2008

Optics and photonics-Optical transfer function - Definitions and mathematical relationships

Bahagian

Part 2: Test lenses for focimeters used for measuring contact lenses

Bahagian

Part 1: HMEs for use with minimum tidal volumes of 250 ml

Seksyen 244

MS ISO 9360

Open as pageSuggest a correction

Anaesthetic and respiratory equipment -

Suggest a correction

Heat and moisture exchangers (HMEs) for

Humidifying respired gases in humans:

HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml

Suggest a correction

24

Seksyen 246

Customer satisfaction - Guidelines for complaints handling in organizations

Open as pageSuggest a correction

10079

Medical suction equipment - Part 1:

Suggest a correction

Electrically powered suction equipment -

Safety requirements

Seksyen 250

Oxygen concentrator supply systems for use with medical gas pipeline systems

Open as pageSuggest a correction

10109

Optics and photonics - Environmental requirements - Part 1: General overview, terms and definitions, climatic zones and their parameters

Seksyen 251

MS ISO

Open as pageSuggest a correction

10364

2008

Structural adhesives - Determination of the pot life (working life) of multi-component adhesives

Seksyen 253

Adhesives - Designation of main failure patterns

Open as pageSuggest a correction

10392

2008

Road vehicles with two axles

-

determination of centre of gravity

Seksyen 254

MS ISO

Open as pageSuggest a correction

10524

Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices

Seksyen 260

Guidelines for the selection of roller chain drives

Open as pageSuggest a correction

11027

2008

Pepper and pepper oleoresins

-

Determination of piperine content -

Seksyen 261

Method using high-performance liquid chromatography

Open as pageSuggest a correction

11079

2008

Ergonomics of the thermal environment -

Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects

Bahagian

Part 3: Determination of moisture content using the oven drying method

Bahagian

Part 5: Determination of characteristics of concentric rotation

Bahagian

Part 6: Determination of bending strength by the three-point method

Bahagian

Part 7: Determination of flexural modulus by the three-point method

Bahagian

Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis

Seksyen 269

MS ISO

Open as pageSuggest a correction

11162

2008

Peppercorns (Piper Nigrum L.) in brine -

Specification and test methods

26

Seksyen 273

Gas cylinders - Procedures for change of gas service

Open as pageSuggest a correction

11758

2008

Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance

Seksyen 277

Textile floor coverings - Pure wool, hand-knotted pile carpets - Specification

Open as pageSuggest a correction

11860

2008

Bahagian

Part 1: Vocabulary

Bahagian

Part 2: Testing of airbag modules

Bahagian

Part 3: Testing of inflator assemblies

Bahagian

Part 2: Guidelines for the use of impact severity measures

Seksyen 285

Textile floor coverings - Determination of mass loss using the Lisson test

Open as pageSuggest a correction

13341

2008

Transportable gas cylinders - Fitting of valves to gas cylinders

27

Seksyen 287

Textile floor coverings - Guidelines for installation and use on stairs

Open as pageSuggest a correction

13747

2008

Textile floor coverings - Determination of size, squareness and straightness of edge of tiles

Seksyen 289

Textile floor coverings - Determination of resistance to staining by acid food colours

Open as pageSuggest a correction

13769

2008

Seksyen 290

Gas cylinders - Stamp marking

Open as pageSuggest a correction

13829

2008

Water quality - Determination of the genotoxicity of water and waste water using the umu-test

Seksyen 291

MS ISO

Open as pageSuggest a correction

13856

Safety of machinery - Pressure-sensitive protective devices - Part 3: General principle for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices

Seksyen 293

Environmental management - Life cycle assessment - Requirements and guidelines

Open as pageSuggest a correction

14171

2008

Welding consumables - Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels - Classifications

Seksyen 295

Requirements for marking and accompanying information

Open as pageSuggest a correction

14505

Ergonomics of the thermal environment -

Suggest a correction

Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature

Seksyen 296

MS ISO

Open as pageSuggest a correction

14505

Ergonomics of the thermal environment -

Suggest a correction

Evaluation of thermal environments in vehicles - Part 3: Evaluation of thermal comfort using human subjects

Seksyen 297

MS ISO

Open as pageSuggest a correction

14791

2008

Road vehicles - Heavy commercial vehicle combinations and articulated buses -

Lateral stability test methods

28

Seksyen 299

Road vehicles - Heavy commercial vehicles and buses - Steady-state circular tests

Open as pageSuggest a correction

14793

2008

Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods

Seksyen 301

Braking in a turn - Open-loop test methods

Open as pageSuggest a correction

14851

2008

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer

Seksyen 302

MS ISO

Open as pageSuggest a correction

14852

2008

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide

Seksyen 303

MS ISO

Open as pageSuggest a correction

14855

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions

Suggest a correction

-

Method by analysis of evolved carbon dioxide - Part 1: General method

Seksyen 305

Flow-metering devices for connection to terminal units of medical gas pipeline systems

Open as pageSuggest a correction

15037

Road vehicles - Vehicle dynamics test methods - Part 2: General conditions for heavy vehicles and buses

Seksyen 307

Product grade A

Open as pageSuggest a correction

15072

2008

Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A

Seksyen 309

Medical laboratories - Requirements for safety

Open as pageSuggest a correction

15193

2008

In vitro diagnostic medical devices -

Measurement of quantities in samples of biological origin

-

Presentation of reference measurement procedures

29

Seksyen 310

MS ISO

Open as pageSuggest a correction

15194

2008

In vitro diagnostic medical devices -

Measurement of quantities in samples of biological origin - Description of reference materials

Seksyen 312

Laboratory medicine - Requirements for reference measurement laboratories

Open as pageSuggest a correction

15197

2008

In vitro diagnostic test systems

-

Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus

Seksyen 313

MS ISO

Open as pageSuggest a correction

15198

2008

Clinical laboratory medicine - In vitro diagnostic medical devices - Validation of user quality control procedures by the manufacturer

Seksyen 314

MS ISO

Open as pageSuggest a correction

15265

2008

Ergonomics of the thermal environment -

Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions

Seksyen 321

MS ISO

Open as pageSuggest a correction

16000

Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on

Suggest a correction

Tenax TA® sorbent, thermal desorption and gas chromatography using MS/FID

30

Seksyen 323

MS ISO

Open as pageSuggest a correction

16000

Indoor Air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing -

Suggest a correction

Emission test chamber method

Seksyen 324

MS ISO

Open as pageSuggest a correction

16000

Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing -

Suggest a correction

Emission test cell method

Bahagian

Part 11 2008

Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing -

Suggest a correction

Sampling, storage of samples and preparation of test specimens

Seksyen 326

MS ISO

Open as pageSuggest a correction

16017

Indoor, ambient and workplace air -

Suggest a correction

Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography

- Part 1: Pumped sampling

Seksyen 327

MS ISO

Open as pageSuggest a correction

16017

Indoor, ambient and workplace air -

Suggest a correction

Sampling and analysis of volatile organic compounds by sorbent tube/ thermal desorption/ capillary gas chromatography

- Part 2: Diffusive sampling

Seksyen 331

Specifications for adhesives used for finger joints in non-structural lumber products

Open as pageSuggest a correction

17194

2008

Structural adhesives - A standard database of properties

31

Seksyen 333

Textile floor coverings - Determination of wool fibre integrity using an abrasion machine

Open as pageSuggest a correction

17511

2008

In vitro diagnostic medical devices -

Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials

Seksyen 334

MS ISO

Open as pageSuggest a correction

17561

2008

Fine ceramics

(advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance

Seksyen 336

Method for flexural strength of monolithic ceramics at elevated temperature

Open as pageSuggest a correction

17812

2008

Paper, board and pulps - Determination of total magnesium, total calcium, total manganese, total iron and total copper

Seksyen 337

MS ISO

Open as pageSuggest a correction

18153

2008

In vitro diagnostic medical devices -

Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials

Seksyen 339

Natural gas - Correlation between water content and water dew point

Open as pageSuggest a correction

18756

2008

Fine ceramics

(advanced ceramics, advanced technical ceramics)

-

Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF)

method

Seksyen 340

MS ISO

Open as pageSuggest a correction

18757

2008

Fine ceramics

(advanced ceramics, advanced technical ceramics)

-

Determination of specific surface area of ceramic powders by gas adsorption using the BET method

32

Seksyen 342

Transportable liquid oxygen systems for medical use - Particular requirements

Open as pageSuggest a correction

18778

2008

Respiratory equipment - Infant monitors -

Seksyen 344

Medical devices for conserving oxygen and oxygen mixtures - Particular requirements

Open as pageSuggest a correction

18899

2008

Seksyen 345

Rubber - Guide to the calibration of test equipment

Open as pageSuggest a correction

19001

2008

In vitro diagnostic medical devices -

Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology

Seksyen 348

Geographic information - Location-based services - Reference model

Open as pageSuggest a correction

19134

2008

Geographic information - Location-based services

-

Seksyen 352

Adhesives - Determination of temperature dependence of shear strength

Open as pageSuggest a correction

20347

2008

Personal protective equipment

-

Seksyen 353

Occupational footwear

Open as pageSuggest a correction

20685

2008 3-D scanning methodologies for internationally compatible anthropometric databases

Seksyen 355

MS ISO

Open as pageSuggest a correction

21647

2008

Medical electrical equipment - Particular requirements for the basic safety and essential performance of respiratory gas monitors

Seksyen 357

High-pressure flexible connections for use with medical gas systems

Open as pageSuggest a correction

22197

Fine ceramics

Suggest a correction

(advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 1: Removal of nitric oxide

Seksyen 360

Paper - Determination of transmittance by diffuse reflectance measurement

Open as pageSuggest a correction

23145

Fine ceramics

Suggest a correction

(advanced ceramics, advanced technical ceramics)

-

Determination of bulk density of ceramic powders - Part 1: Tap density

Seksyen 364

Pulps - Determination of water retention value (WRV)

Open as pageSuggest a correction

24235

2008

Fine ceramics

(advanced ceramics, advanced technical ceramics)

-

Seksyen 365

Determination of particle size distribution of ceramic powders by laser diffraction method

Open as pageSuggest a correction

24341

2008

Resilient and textile floor coverings -

Determination of length, width and straightness of sheet

34

Bahagian

Part 1: Level 1 - Supervised diver

Bahagian

Part 2: Level 2 - Autonomous diver

Bahagian

Part 3: Level 3 - Dive leader

Seksyen 374

General and statistical principles for certification

Open as pageSuggest a correction

11770

Information technology

Suggest a correction

-

Security techniques - Key management - Part 4:

Mechanisms based on weak secrets

Seksyen 379

MS ISO/IEC

Open as pageSuggest a correction

18028

Information technology

Suggest a correction

-

Security techniques - IT network security - Part 3:

Securing communications between networks using security gateways

Seksyen 381

MS ISO/IEC

Open as pageSuggest a correction

18028

Information technology

Suggest a correction

-

Security techniques - IT network security - Part 5:

Securing communications across networks using virtual private networks

Bahagian

Part 1: BioAPI specification

Bahagian

Part 1: Data element specification

Bahagian

Part 2: Procedures for the operation of the biometric registration authority

Bahagian

Part 3: Patron format specifications

Bahagian

Part 7:

Signature/sign time series data

Bahagian

Part 1: Principles and framework

Seksyen 395

MS ISO/IEC

Open as pageSuggest a correction

24709

Information technology - Conformance testing for the biometric application programming interface (BioAPI) Part 1:

Suggest a correction

Methods and procedures

Seksyen 396

MS ISO/IEC

Open as pageSuggest a correction

24709

Information technology - Conformance testing for the biometric application programming interface (BioAPI) - Part 2:

Suggest a correction

Test assertions for biometric service providers

Seksyen 397

MS ISO/IEC

Open as pageSuggest a correction

24713

Information technology

Suggest a correction

-

Biometric profiles for interoperability and data interchange - Part 1: Overview of biometric systems and biometric profiles

Seksyen 398

MS ISO/IEC

Open as pageSuggest a correction

27005

2008

Information technology

-

Security techniques - Information security risk management

37

Seksyen 400

Inhalational anaesthesia systems - Draw-over vaporizers and associated equipment

Open as pageSuggest a correction

19134

2008

Geographic information - Location - Based services

-

Seksyen 402

Geographic information - Data quality measures

Open as pageSuggest a correction

19139

2008

Geographic information – Metadata - XML schema implementation

Bertarikh 27 Jun 2012

Dated 27 June 2012

[JSM/SD-600/12/13 Jld. 5; PN(PU2)559/V]

DATUK SERI PANGLIMA DR. MAXIMUS JOHNITY ONGKILI

Menteri Sains, Teknologi dan Inovasi/

Minister of Science, Technology and Innovations

Common questions

What is PERISYTIHARAN PENENTUAN STANDARD?
PERISYTIHARAN PENENTUAN STANDARD is Malaysia P.U. (B), cited as P.U. (B) 246 2012, currently marked in force and first recorded in 2012.
Is PERISYTIHARAN PENENTUAN STANDARD still in force?
Yes — PERISYTIHARAN PENENTUAN STANDARD is currently in force.
When did PERISYTIHARAN PENENTUAN STANDARD take effect?
PERISYTIHARAN PENENTUAN STANDARD was first recorded in 2012.
How many sections does PERISYTIHARAN PENENTUAN STANDARD have?
PERISYTIHARAN PENENTUAN STANDARD contains 402 sections.
Where can I read the official version of PERISYTIHARAN PENENTUAN STANDARD?
The official text of PERISYTIHARAN PENENTUAN STANDARD is published at lom.agc.gov.my.