NOTIS PENENTUAN AWAL AFIRMATIF PENYIASATAN MENGENAI KELUARAN PLAT GULUNGAN PANAS YANG DIIMPORT KE DALAM MALAYSIA

Keluaran yang disiasat dan pengelasan tarifnya adalah seperti yang berikut:

Bagi maksud subsubperenggan 1(a), keluaran plat gulungan panas yang aplikasi, standard antarabangsa, gred dan tajuknya dinyatakan dalam Jadual Pertama tidak dikenakan duti pelindung sementara.

Bagi maksud subsubperenggan 1(b), Kod H. S. dan AHTN adalah hanya untuk makluman dan tidak mempunyai kesan mengikat terhadap pengelasan keluaran itu.

P.U. (B) 543 3

Keluaran serupa atau keluaran yang bersaing secara langsung 4.

Keluaran serupa atau keluaran yang bersaing secara langsung adalah keluaran yang dikeluarkan oleh industri dalam negeri dan mempunyai perihalan yang sama dengan keluaran yang dinyatakan dalam perenggan 1.

Sebab bagi penentuan awal afirmatif 5.

Berdasarkan penyiasatan, Pihak Berkuasa Penyiasat telah mendapati bahawa terdapat kenaikan secara mutlak import keluaran semasa tempoh penentuan kemudaratan iaitu mulai 1 Januari 2013 sehingga 31 Disember 2013. Pihak Berkuasa

Penyiasat mendapati bahawa industri dalam negeri telah mengalami kemudaratan berkenaan dengan pengurangan syer pasaran, pengurangan dalam jualan dalam negeri, tahap produktiviti dan penggunaan kapasiti yang rendah, penurunan dalam aliran tunai, kemerosotan keuntungan dan inventori dan pulangan pelaburan yang negatif.

Perkara ini telah menyebabkan dan mengancam untuk menyebabkan kemudaratan yang serius kepada industri dalam negeri yang mengeluarkan keluaran serupa atau keluaran yang bersaing secara langsung.

Langkah sementara yang terpakai 6.

Langkah sementara yang terpakai hendaklah dalam bentuk duti pelindung sementara sebanyak 23.93 peratus dan dikenakan terhadap negara yang dinyatakan dalam Jadual Kedua.

Tempoh bagi membuat penentuan muktamad 7.

Penentuan muktamad berhubung dengan penyiasatan hendaklah dibuat dalam tempoh dua ratus hari mulai 14 Disember 2014.

P.U. (B) 543 4

JADUAL PERTAMA

[Perenggan 1 dan 2]

KELUARAN PLAT GULUNGAN PANAS YANG TIDAK DIKENAKAN DUTI PELINDUNG

SEMENTARA

Aplikasi

Standard antarabangsa

Gred

Tajuk 1.

Automotif

JIS G3113

SAPH 310

SAPH 370

SAPH 400

SAPH 440

Plat keluli, kepingan dan jalur gulungan panas untuk kegunaan struktur automotif

JIS G3134

SPFH 490

SPFH 540

SPFH 590

SPFH 540Y

SPFH 590Y

Kepingan keluli kekuatan tinggi gulungan panas dengan kebolehbentukan diperbaik untuk kegunaan struktur automotif

2.

Dandang dan bejana tekanan

SA203/SA203M

Spesifikasi standard bagi plat bejana tekanan, keluli aloi, nikel

SA204/SA204M

Spesifikasi standard bagi plat bejana tekanan, keluli aloi, molibdenum

SA285/SA285M

Spesifikasi standard bagi plat bejana tekanan, keluli karbon, kekuatan tegangan rendah dan pertengahan

SA299/SA299M

Satu gred sahaja

Spesifikasi standard bagi plat bejana tekanan, keluli karbon, mangan-silikon

SA302/SA302M

Spesifikasi standard bagi plat bejana tekanan, keluli aloi, mangan-molibdenum dan mangan-molibdenum-nikel

P.U. (B) 543 5

Aplikasi

Standard antarabangsa

Gred

Tajuk

SA387/SA387M

2, 12, 11, 22, 22L,

21, 21L, 5, 9, 91,

911

Spesifikasi standard bagi plat bejana tekanan, keluli aloi, kromium-molibdenum

SA515/SA515M

60, 65, 70

Spesifikasi standard bagi plat bejana tekanan, keluli karbon, untuk perkhidmatan suhu pertengahan dan tinggi

SA516/SA516M

60, 65, 70

Spesifikasi standard bagi plat bejana tekanan, keluli karbon, untuk perkhidmatan suhu sederhana dan rendah

SA533/SA533M

Jenis A, B, C, D

Kelas 1, 2, 3

Spesifikasi standard bagi plat bejana tekanan, keluli aloi, terlindap dan terbaja, mangan-molibdenum dan mangan-molibdenum-nikel

SA537/SA537M

Kelas 1, 2, 3

Spesifikasi standard bagi plat bejana tekanan, dirawat haba, keluli karbon-mangan-silikon

SA542/SA542M

Jenis A, B, C, D, E

Kelas 1, 2, 3, 4 dan 4a

Spesifikasi standard bagi plat bejana tekanan, keluli aloi, kromium-molibdenum terlindap dan terbaja

SA553/SA553M

Jenis I, II

Spesifikasi standard bagi plat bejana tekanan, keluli aloi, 8 dan 9 peratus nikel terlindap dan terbaja

SA738/SA738M

Spesifikasi standard bagi plat bejana tekanan, dirawat haba, keluli karbon-mangan-silikon untuk perkhidmatan suhu sederhana dan rendah

SA841/SA841M

Spesifikasi standard bagi plat keluli untuk bejana tekanan, dihasilkan daripada

P.U. (B) 543 6

Aplikasi

Standard antarabangsa

Gred

Tajuk

Proses Kawalan Mekanikal-A203/A203M

Spesifikasi standard bagi plat bejana tekanan, keluli aloi, nikel

A204/A204M

Spesifikasi standard bagi plat bejana tekanan, keluli aloi, molibdenum

A285/A285M-C

Spesifikasi standard bagi plat bejana tekanan, keluli karbon, berkekuatan tegangan rendah dan pertengahan

A299/A299M

Satu gred sahaja

Spesifikasi standard bagi plat bejana tekanan, keluli karbon, mangan-silikon

A302/A302M

Spesifikasi standard bagi plat bejana tekanan, keluli aloi, mangan-molibdenum dan mangan-molibdenum-nikel

A387/A387M

2, 12, 11, 22, 22L,

21, 21L, 5, 9, 91,

911

Spesifikasi standard bagi plat bejana tekanan, keluli aloi, kromium-molibdenum

A515/A515M

60, 65, 70

Spesifikasi standard bagi plat bejana tekanan, keluli karbon, untuk perkhidmatan suhu pertengahan dan tinggi

A516/A516M

60, 65, 70

Spesifikasi standard bagi plat bejana tekanan, keluli karbon, untuk perkhidmatan suhu rendah dan sederhana

P.U. (B) 543 7

Aplikasi

Standard antarabangsa

Gred

Tajuk

A533/A533M

Jenis A, B, C, D

Kelas 1, 2, 3

Spesifikasi standard bagi plat bejana tekanan, keluli aloi, terlindap dan terbaja, mangan-molibdenum dan mangan-molibdenum-nikel

A537/A537M

Kelas 1, 2, 3

Spesifikasi standard bagi plat bejana tekanan, dirawat haba, keluli karbon-mangan-silikon

A542/A542M

Jenis A, B, C, D, E

Kelas 1, 2, 3, 4 dan 4a

Spesifikasi standard bagi plat bejana tekanan, keluli aloi, kromium-molibdenum terlindap dan terbaja

A553/A553M

Jenis I, II

Spesifikasi standard bagi plat bejana tekanan, keluli aloi, 8 dan 9 peratus nikel terlindap dan terbaja

A738/A738M

Spesifikasi standard bagi plat bejana tekanan, dirawat haba, keluli karbon-mangan-silikon untuk perkhidmatan suhu rendah dan sederhana

A841/A841M

Spesifikasi standard bagi plat keluli bagi bejana tekanan, dihasilkan daripada

Proses Kawalan Mekanikal-

10028-2

P235GH

P265GH

P295GH

P355GH

Produk rata dibuat daripada keluli untuk tujuan tekanan.

Bahagian 2: keluli bukan aloi dan aloi dengan sifat suhu ternaik tertentu

P.U. (B) 543 8

Aplikasi

Standard antarabangsa

Gred

Tajuk

10028-3

P275 NH

P275 NL1

P275 NL2

P355 NH

P355 NL1

P355 NL2

P460 NH

P460 NL1

P460 NL2

Produk rata dibuat daripada keluli untuk tujuan tekanan.

Bahagian 3: keluli berbutir halus boleh kimpal, ternormal

G3103 (SB)

SB 450M

SB 480M

Keluli karbon dan plat keluli aloi molibdenum untuk dandang dan bejana tekanan lain

JIS G3115 (SPV)

SPV450

SPV490

Plat keluli bagi bejana tekanan untuk perkhidmatan suhu pertengahan

JIS G3118 (SGV)

SGV450

SGV480

Plat keluli karbon bagi bejana tekanan untuk perkhidmatan suhu pertengahan dan sederhana

G3119 (SBV)

SBV 1A

SBV 1B

SBV 2

SBV 3

Plat keluli aloi mangan-molibdenum dan mangan-molibdenum-nikel bagi dandang dan bejana tekanan lain

G3120 (SQV)

SQV 1A

SQV 1B

SQV 2A

SQV 2B

SQV 3A

SQV 3B

Plat keluli aloi mangan-molibdenum dan mangan-molibdenum-nikel bagi bejana tekanan terlindap dan terbaja

G3126 (SLA)

SLA 235A

SLA 235B

SLA 325A

SLA 325B

SLA 360

SLA 410

Plat keluli karbon bagi bejana tekanan untuk perkhidmatan suhu rendah

P.U. (B) 543 9

Aplikasi

Standard antarabangsa

Gred

Tajuk

G4109 (SCMV)

SCMV 1

SCMV 2

SCMV 3

SCMV 4

SCMV 5

SCMV 6

Plat keluli aloi kromium-molibdenum bagi dandang dan bejana tekanan 3.

Untuk kegunaan luar pesisir dan struktur

(minyak dan gas)

EN10025-3

S355N

S355NL

S420N

S420NL

S460N

S460NL

Keluli struktur berbutir halus boleh kimpal penggulung ternormal/ternormal

EN10025-4

S355M

S355ML

S420M

S420ML

S460M

S460ML

Keluli struktur berbutir halus boleh kimpal yang digulung secara mekanikal haba

EN10025-5

S355J2W

S355J2WP

S355K2W

Keluli struktur dengan keluli luluhawa rintangan kakisan atmosfera diperbaik

P.U. (B) 543 10

Aplikasi

Standard antarabangsa

Gred

Tajuk

EN10025-6

S460Q

S460QL

S460QL1

S500Q

S500QL

S500QL1

S550Q

S550QL

S550MQL1

S620Q

S620QL

S620QL1

S690Q

S690QL

S690QL1

S890Q

S890QL

S890QL1

S960Q

S960QL

Produk rata keluli struktur berkekuatan alah tinggi dalam keadaan terlindap dan terbaja

ASTM-A514/A514M

Gred A

Gred B

Gred E

Gred F

Gred H

Gred P

Gred Q

Gred S

Spesifikasi standard bagi plat keluli aloi sesuai dikimpal yang berkekuatan alah tinggi, terlindap dan terbaja

SA633/SA633M

Gred A

Gred C

Gred D

Gred E

Spesifikasi standard bagi plat keluli struktur berkekuatan tinggi aloi rendah ternormal

P.U. (B) 543 11

Aplikasi

Standard antarabangsa

Gred

Tajuk

SA514/SA514M

Gred A

Gred B

Gred E

Gred F

Gred H

Gred P

Gred Q

Gred S

Spesifikasi standard bagi plat keluli aloi sesuai dikimpal yang berkekuatan alah tinggi, terlindap dan terbaja

EN10225

S355G10+M

S355G10+N

S355G2+M

S355G3+M

S355G5+M

S355G6+M

S355G7+M

S355G7+N

S355G8+M

S355G8+N

S355G9+M

S355G9+N

S420G1+M

S420G1+QT

S420G2+M

S420G2+QT

S460G1+M

S460G1+QT

S460G2+M

S460G2+QT

Keluli struktur boleh kimpal bagi struktur pesisir luar tetap

4.

Bagi paip alir bagi minyak dan gas

API – 5L

L245/B

L290/X42

L320/X46

L360/X52

L390/X56

L415/X60

L450/X65

L485/X70

L555/X80

L625/X90

L690/X100

L830/X120

Spesifikasi bagi paip alir

P.U. (B) 543 12

Aplikasi

Standard antarabangsa

Gred

Tajuk 5.

Untuk kegunaan struktur pesisir pantai

(minyak dan gas)

API – 2H

GR.50

Spesifikasi bagi plat keluli karbon mangan bagi sendi tiub pelantar pesisir pantai

API – 2W

GR.50T

Spesifikasi bagi plat keluli bagi struktur luar pesisir yang dihasilkan daripada

Proses Kawalan Mekanikal-

6.

Untuk industri pembuatan kapal

ABS

DQ51

DQ70

EQ43

EQ51

EQ56

EQ63

EQ70

AQ51~FQ70

American

Bureau of

Shipping

BV

Bureau Veritas

P.U. (B) 543 13

Aplikasi

Standard antarabangsa

Gred

Tajuk

LR

Lloyd's Register

DNV

A32

A36

A500

A550

A620

D32

D36

E32

E36

E420

E500

E550

E620

E690

A500~FQ70

Det Novske Veritas

P.U. (B) 543 14

Aplikasi

Standard antarabangsa

Gred

Tajuk

GL

German Lloyd's Register of

Shipping

NK

Nippon Kaiji Kyokai

7.

Bagi plat rintangan kakisan

JIS G3114

(SMA)

SMA400AW

SMA400BW

SMA400CW

SMA400AP

SMA400BP

SMA400CP

SMA490AW

SMA490BW

SMA490CW

SMA490AP

SMA490BP

SMA490CP

SMA570W

SMA570P

Keluli rintangan kakisan atmosfera gulungan panas bagi struktur terkimpal

JIS G3125 (SPA)

SPA-H

SPA-C

Keluli gulungan rintangan kakisan atmosfera superior

P.U. (B) 543 15

Aplikasi

Standard antarabangsa

Gred

Tajuk

A242/A242M

Satu gred sahaja

Spesifikasi standard bagi keluli struktur aloi rendah berkekuatan alah tinggi

A588/A588M

Gred A

Gred B

Gred C

Gred K

Spesifikasi standard bagi keluli struktur aloi rendah berkekuatan alah tinggi dengan takat alah minimum 50Ksi (345Mpa) sehingga ketebalan 4in. (100mm)

8.

Kegunaan struktur mesin

JIS G4051

S45C

S50C

Keluli karbon untuk kegunaan struktur mesin

9.

Aplikasi kejuruteraan

(trak buang, timba, penyalur, bar

Grizzly, dsb.)

Hardox 400

Keluli rintangan lelasan berkekuatan tinggi lanjutan dengan kekerasan nominal 400 HBW

Hardox 450

Keluli rintangan lelasan berkekuatan tinggi lanjutan dengan kekerasan nominal 450 HBW

Hardox 500

Keluli rintangan lelasan berkekuatan tinggi lanjutan dengan kekerasan nominal 500 HBW

10. Peralatan mengangkut dan automotif

(trak tangki, kren dan mesin tolak tanah)

S690 QL

Weldox 700E

Keluli struktur berkekuatan tinggi lanjutan dengan kekuatan alah 650 - 700

Mpa

S890 QL

Weldox 900E

Keluli struktur berkekuatan tinggi lanjutan dengan kekuatan alah minimum sehingga 900 Mpa

Weldox 1100E

Keluli struktur berkekuatan tinggi lanjutan dengan kekuatan alah minimum 1100 Mpa

P.U. (B) 543 16

Aplikasi

Standard antarabangsa

Gred

Tajuk

EN 10149-2;

S600 MC

Domex 600

Gulungan panas berkekuatan tinggi lanjutan, kekuatan tinggi tambahan, pembentukan sejuk dengan kekuatan alah minimum 600 Mpa

EN 10149-2;

S700 MC

Domex 700

Gulungan panas berkekuatan tinggi lanjutan, kekuatan tinggi tambahan, pembentukan sejuk dengan kekuatan alah minimum 700 Mpa

JADUAL KEDUA

[Perenggan 6]

NEGARA YANG DIKENAKAN DUTI PELINDUNG SEMENTARA

1.

Australia 2.

Kanada 3.

Republik Czech 4.

Republik Persekutuan Jerman 5.

Perancis 6.

Luxembourg 7.

Greece 8.

Hungary 9.

Ireland 10.

Itali 11.

Jepun 12.

Negara Belgium 13.

Negara Denmark 14.

Negara Norway 15.

Negara Sepanyol 16.

Negara Sweden 17.

Negara Belanda 18.

New Zealand 19.

Republik Rakyat China 20.

Republik Portugal 21.

Liechtenstein 22.

P.U. (B) 543 17

Bertarikh 8 Disember 2014

[MITI:ID/(S/AP/SG/045/3 Jld 2); PN(PU2)529/XVI]

23.

Republik Bulgaria 24.

Republik Cyprus 25.

Republik Estonia 26.

Republik Finland 27.

Republik Iceland 28.

Republik Indonesia 29.

Republik Korea 30.

Republik Latvia 31.

Republik Lithuania 32.

Republik Malta 33.

Republik Poland 34.

Republik Singapura 35.

Republik Slovenia 36.

Romania 37.

Slovakia 38.

Negara Israel 39.

Switzerland 40.

Ukraine 41.

United Kingdom of Great Britain dan Ireland Utara 42.

Amerika Syarikat

DATO’ SRI MUSTAPA BIN MOHAMED

Menteri Perdagangan Antarabangsa dan Industri

P.U. (B) 543 18

SAFEGUARDS ACT 2006

NOTICE OF AFFIRMATIVE PRELIMINARY DETERMINATION OF AN INVESTIGATION

WITH REGARD TO HOT ROLLED PLATES PRODUCTS IMPORTED INTO MALAYSIA

(SM 01/14)

IN exercise of the powers conferred by subsection 20(3) of the Safeguards Act 2006

[Act 657] and regulation 11 of the Safeguards Regulations 2007 [P.U. (A) 386/2007], the Government has made an affirmative preliminary determination in relation to the investigation with regard to the hot rolled plates products imported into Malaysia as described in paragraph 1 (“products”).

Products under investigation and tariff classification 1.

The products under investigation and its tariff classification are as follows:

(a)

the hot rolled steel plate products of iron or non-alloy steel and other alloy steel, of a width of 600 millimetres or more, hot rolled, not clad, plated or coated, of a thickness between 6 millimetres to 75

millimetres, and specifically excluding the hot rolled plates products which applications, international standards, grades and titles are specified in First Schedule; and

(b)

the products classified under the Harmonised System Code (H.S. Code)

7208.51.000, 7208.52.000, 7225.40.000, and ASEAN Harmonised

Tariff

Nomenclature

(AHTN)

7208.51.0000,

7208.52.0000,

7225.40.9000.

2.

For the purposes of subsubparagraph 1(a), the hot rolled plates products which applications, international standards, grades and titles are specified in Schedule 1

are not imposed with provisional safeguards duties.

3.

For the purposes of subsubparagraph 1(b), the H.S. Code and AHTN are only for information and shall have no binding effect on the classification of the products.

P.U. (B) 543 19

Like products or directly competitive products 4.

The like products or directly competitive products are products which are produced by the domestic industry and have the same description as the products specified in paragraph 1.

Reasons for affirmative preliminary determination 5.

Based on the investigation, the Investigating Authority has found that there was an increase in imports of the products in absolute terms during the period of injury determination that is from 1 January 2013 to 31 December 2013. The Investigating

Authority has found that the domestic industry has suffered serious injury in respect of the decline in market share, decline in domestic sales, low production and capacity utilisation, decline in cash flow, decline in profitability and inventory, and negative return on investment. These have caused and are threatening to cause serious injury to the domestic industry that produces like or directly competitive products.

Provisional measures applicable 6.

The provisional measures applicable shall take the form of provisional safeguards duty in the amount of 23.93 percent and shall be imposed on the countries specified in

Second Schedule.

Period for making final determination 7.

A final determination in relation to the investigation shall be made within the period of two hundred days from 14 December 2014.

P.U. (B) 543 20

FIRST SCHEDULE

[Paragraphs 1 and 2]

HOT ROLLED PLATES PRODUCTS WHICH ARE NOT IMPOSED WITH THE PROVISIONAL

SAFEGUARDS DUTIES

Application

International standard

Grades

Title 1.

Automotive

JIS G3113

SAPH 310

SAPH 370

SAPH 400

SAPH 440

Hot rolled steel plates, sheets and strip for automotive structural uses

JIS G3134

SPFH 490

SPFH 540

SPFH 590

SPFH 540Y

SPFH 590Y

Hot rolled high strength steel sheets with improved formability for automobile structural uses

2. Boilers and

Pressure

Vessels

SA203/SA203M

Standard specification for pressure vessel plates, alloy steel, nickel

SA204/SA204M

Standard specification for pressure vessel plates, alloy steel, molybdenum

SA285/SA285M

Standard specification for pressure vessel plates, carbon steel, low and intermediate tensile strength

SA299/SA299M

One grade only

Standard specification for pressure vessel plates, carbon steel, manganese-silicon

SA302/SA302M

Standard specification for pressure vessel plates, alloy steel, manganese-molybdenum and manganese-molybdenum-nickel

P.U. (B) 543 21

Application

International standard

Grades

Title

SA387/SA387M

2, 12, 11, 22,

22L, 21, 21L, 5,

9, 91, 911

Standard specification for pressure vessel plates, alloy steel, chromium-molybdenum

SA515/SA515M

60, 65, 70

Standard specification for pressure vessel plates, carbon steel, for intermediate and higher temperature service

SA516/SA516M

60, 65, 70

Standard specification for pressure vessel plates, carbon steel, for moderate and lower temperature service

SA533/SA533M

Type A, B, C, D

Class 1, 2, 3

Standard specification for pressure vessel plates, alloy steel, quenched and tempered, manganese-molybdenum and manganese-molybdenum-nickel

SA537/SA537M

Class 1, 2, 3

Standard specification for pressure vessel plates, heat treated, carbon-manganese-silicon steel

SA542/SA542M

Type A, B, C, D, E

Class 1, 2, 3, 4

and 4a

Standard specification for pressure vessel plates, alloy steel, quenched and tempered chromium-molybdenum

SA553/SA553M

Type I, II

Standard specification for pressure vessel plates, alloy steel, quenched and tempered 8 and 9 percent nickel

SA738/SA738M

Standard specification for pressure vessel plates, heat treated, carbon-manganese-silicon steel for moderate and lower temperature service

P.U. (B) 543 22

Application

International standard

Grades

Title

SA841/SA841M

Standard specification for steel plates for pressure vessel, produced by the

Thermo-Mechanical

Control

Process (TMCP)

A203/A203M

Standard specification for pressure vessel plates, alloy steel, nickel

A204/A204M

Standard specification for pressure vessel plates, alloy steel, molybdenum

A285/A285M-C

Standard specification for pressure vessel plates, carbon steel, low and intermediate tensile strength

A299/A299M

One Grade only

Standard specification for pressure vessel plates, carbon steel, manganese-silicon

A302/A302M

Standard specification for pressure vessel plates, alloy steel, manganese-molybdenum and manganese-molybdenum-nickel

A387/A387M

2, 12, 11, 22,

22L, 21, 21L, 5,

9, 91, 911

Standard specification for pressure vessel plates, alloy steel, chromium-molybdenum

A515/A515M

60, 65, 70

Standard specification for pressure vessel plates, carbon steel, for intermediate and higher temperature service

A516/A516M

60, 65, 70

Standard specification for pressure vessel plates, carbon steel, for moderate and lower temperature service

P.U. (B) 543 23

Application

International standard

Grades

Title

A533/A533M

Type A, B, C, D

Class 1, 2, 3

Standard specification for pressure vessel plates, alloy steel, quenched and tempered, manganese-molybdenum and manganese-molybdenum-nickel

A537/A537M

Class 1, 2, 3

Standard specification for pressure vessel plates, heat treated, carbon-manganese-silicon steel

A542/A542M

Type A, B, C, D, E

Class 1, 2, 3, 4

and 4a

Standard specification for pressure vessel plates, alloy steel, quenched and tempered chromium-molybdenum

A553/A553M

Type I, II

Standard specification for pressure vessel plates, alloy steel, quenched and tempered 8 and 9 percent nickel

A738/A738M

Standard specification for pressure vessel plates, heat treated, carbon-manganese-silicon steel for moderate and lower temperature service

A841/A841M

Standard specification for steel plates for pressure vessel, produced by the

Thermo-Mechanical

Control

Process (TMCP)

10028-2

P235GH

P265GH

P295GH

P355GH

Flat product made of steels for pressure purpose. Part 2: non-alloy and alloy steel with specified elevated temperature properties

10028-3

P275 NH

P275 NL1

P275 NL2

P355 NH

P355 NL1

Flat product made of steels for pressure purpose. Part 3:

weldable fine grain steel, normalized

P.U. (B) 543 24

Application

International standard

Grades

Title

P355 NL2

P460 NH

P460 NL1

P460 NL2

G3103 (SB)

SB 450M

SB 480M

Carbon steel and molybdenum alloy steel plates for boilers and other pressure vessels

JIS G3115 (SPV)

SPV450

SPV 490

Steel plate for pressure vessel for intermediate temperature service

JIS G3118 (SGV)

SGV 450

SGV 480

Carbon steel plates for pressure vessels for intermediate and moderate temperature service

G3119 (SBV)

SBV 1A

SBV 1B

SBV 2

SBV 3

Manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates for boilers and other pressure vessels

G3120 (SQV)

SQV 1A

SQV 1B

SQV 2A

SQV 2B

SQV 3A

SQV 3B

Manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates for quenched and tempered pressure vessels

G3126 (SLA)

SLA 235A

SLA 235B

SLA 325A

SLA 325B

SLA 360

SLA 410

Carbon steel plates for pressure vessels for low temperature service

G4109 (SCMV)

SCMV 1

SCMV 2

SCMV 3

SCMV 4

SCMV 5

SCMV 6

Chromium-molybdenum alloy steel plates for boilers and pressure vessels

P.U. (B) 543 25

Application

International standard

Grades

Title 3.

For offshore and structural use (oil and gas)

EN10025-3

S355N

S355NL

S420N

S420NL

S460N

S460NL

Normalized/normalized roller weldable fine grain structural steels

EN10025-4

S355M

S355ML

S420M

S420ML

S460M

S460ML

Thermo mechanically rolled weldable fine grain structural steels

EN10025-5

S355J2W

S355J2WP

S355K2W

Structural steels with improved atmospheric corrosion resistance-weathering steel

EN10025-6

S460Q

S460QL

S460QL1

S500Q

S500QL

S500QL1

S550Q

S550QL

S550MQL1

S620Q

S620QL

S620QL1

S690Q

S690QL

S690QL1

S890Q

S890QL

S890QL1

S960Q

S960QL

Flat products of high yield strength structural steels in the quenched and tempered condition

P.U. (B) 543 26

Application

International standard

Grades

Title

ASTM -

A514/A514M

Grade A

Grade B

Grade E

Grade F

Grade H

Grade P

Grade Q

Grade S

Standard specification for high yield strength, quenched and tempered alloy steel plate suitable for welding

SA633/SA633M

Grade A

Grade C

Grade D

Grade E

Standard specification for normalized high strength low alloy structural steel plates

SA514/SA514M

Grade A

Grade B

Grade E

Grade F

Grade H

Grade P

Grade Q

Grade S

Standard specification for high yield strength, quenched and tempered alloy steel plate suitable for welding

EN10225

S355G10+M

S355G10+N

S355G2+M

S355G3+M

S355G5+M

S355G6+M

S355G7+M

S355G7+N

S355G8+M

S355G8+N

S355G9+M

S355G9+N

S420G1+M

S420G1+QT

S420G2+M

S420G2+QT

S460G1+M

S460G1+QT

S460G2+M

S460G2+QT

Weldable structural steel for fixed offshore structures

P.U. (B) 543 27

Application

International standard

Grades

Title 4.

For line pipe for oil and gas

API – 5L

L245/B

L290/X42

L320/X46

L360/X52

L390/X56

L415/X60

L450/X65

L485/X70

L555/X80

L625/X90

L690/X100

L830/X120

Specification for line pipe

5.

For offshore structural use

(oil and gas)

API – 2H

GR.50

Specification for carbon manganese steel plate for offshore platform tubular joints

API – 2W

GR.50T

Specification for steel plates for offshore structures produced by

Thermo-Mechanical

Control

Processing (TMCP)

P.U. (B) 543 28

Application

International standard

Grades

Title 6.

For ship building industry

ABS

DQ51

DQ70

EQ43

EQ51

EQ56

EQ63

EQ70

AQ51~FQ70

American Bureau of Shipping

BV

Bureau Veritas

P.U. (B) 543 29

Application

International standard

Grades

Title

LR

Lloyd's Register

DNV

A32

A36

A500

A550

A620

D32

D36

E32

E36

E420

E500

E550

E620

E690

A500~FQ70

Det Novske Veritas

P.U. (B) 543 30

Application

International standard

Grades

Title

GL

German Lloyd's Register of

Shipping

NK

Nippon Kaiji Kyokai

7.

For corrosion resistance plate

JIS

G3114

(SMA)

SMA400AW

SMA400BW

SMA400CW

SMA400AP

SMA400BP

SMA400CP

SMA490AW

SMA490BW

SMA490CW

SMA490AP

SMA490BP

SMA490CP

SMA570W

SMA570P

Hot rolled atmospheric corrosion resisting steels for welded structures

JIS G3125 (SPA) SPA-H

SPA-C

Superior atmospheric corrosion resisting rolled steel

A242/A242M

One grade only

Standard specification for high yield strength low alloy structural steel

P.U. (B) 543 31

Application

International standard

Grades

Title

A588/A588M

Grade A

Grade B

Grade C

Grade K

Standard specification for high yield strength low alloy structural steel with 50Ksi

(345Mpa)

minimum yield point to 4in. (100mm) thick

8.

Machine structural use

JIS G4051

S45C

S50C

Carbon steel for machine structural use

9.

Engineering application

(dump truck, bucket, hopper,

Grizzly bar etc.)

Hardox 400

Advanced high strength abrasion resistant steel with a nominal hardness of 400 HBW

Hardox 450

Advanced high strength abrasion resistant steel with a nominal hardness of 450 HBW

Hardox 500

Advanced high strength abrasion resistant steel with a nominal hardness of 500 HBW

10. Lifting equipment &

automotive

(truck chassis, cranes and earthmoving machines)

S690 QL

Weldox 700E

Advanced high strength structural steel with a yield strength of 650 - 700 Mpa

S890 QL

Weldox 900E

Advanced high strength structural steel with a minimum yield strength of up to 900 Mpa

Weldox 1100E

Advanced high strength structural steel with a minimum yield strength of 1100 Mpa

EN

10149-2;

S600 MC

Domex 600

Advanced high strength hot rolled, extra high strength, cold forming, with a minimum yield strength of 600 Mpa

EN

10149-2;

S700 MC

Domex 700

Advanced high strength hot rolled, extra high strength, cold forming, with a minimum yield strength of 700 Mpa

P.U. (B) 543 32

SECOND SCHEDULE

[Paragraph 6]

COUNTRIES IMPOSED WITH PROVISIONAL SAFEGUARDS DUTIES

1.

Australia 2.

Canada 3.

Czech Republic 4.

Federal Republic of Germany 5.

France 6.

Luxembourg 7.

Greece 8.

Hungary 9.

Ireland 10.

Italy 11.

Japan 12.

Kingdom of Belgium 13.

Kingdom of Denmark 14.

Kingdom of Norway 15.

Kingdom of Spain 16.

Kingdom of Sweden 17.

Kingdom of the Netherlands 18.

New Zealand 19.

People's Republic of China 20.

Portuguese Republic 21.

Liechtenstein 22.

Republic of Austria 23.

Republic of Bulgaria 24.

Republic of Cyprus 25.

Republic of Estonia 26.

Republic of Finland 27.

Republic of Iceland 28.

Republic of Indonesia 29.

Republic of Korea 30.

Republic of Latvia 31.

Republic of Lithuania 32.

Republic of Malta 33.

Republic of Poland 34.

Republic of Singapore 35.

Republic of Slovenia 36.

Romania 37

Slovakia 38.

State of Israel 39.

Switzerland 40.

Ukraine 41.

United Kingdom of Great Britain and Northern Ireland 42.

United States of America

P.U. (B) 543 33

Dated 8 December 2014

[MITI:ID/(S/AP/SG/045/3 Jld 2); PN(PU2)529/XVI]

DATO’ SRI MUSTAPA BIN MOHAMED

Minister of International Trade and Industry