P.U. (B)In force
Perisytiharan Penentuan Standard
The full official text, structured for quick navigation. Copy any provision or jump straight to a section.
- Enacted
- 2014
- Sections
- 356
Perisytiharan Penentuan Standard is Malaysia P.U. (B), cited as P.U. (B) 38 2014, currently marked in force and first recorded in 2014.
Opening note
Preamble
- PADA menjalankan kuasa yang diberikan oleh subseksyen 15(1) Akta Standard Malaysia 1996 [Akta 549], Menteri mengisytiharkan pemakaian penentuan yang disenaraikan dalam Jadual menjadi penentuan standard bagi maksud Akta ini. STANDARDS OF MALAYSIA ACT 1996 DECLARATION OF STANDARD SPECIFICATIONS
Opening note
Preamble
- IN exercise of the powers conferred by subsection 15(1) of the Standards of Malaysia Act 1996 [Act 549], the Minister declares the application of the specifications listed in the Schedule to be the standard specifications for the purpose of this Act. P.U. (B) 38 3 JADUAL/SCHEDULE Nombor Penentuan/ Specification Number Bahagian/ Part Tahun/ Year Penentuan/ Specification
Bahagian
Part 2 2005
Soils for civil engineering purposes - Test method - Part 2: Classification tests
Seksyen 2
Bahagian
Part 3 2005
Soils for civil engineering purposes - Test method - Part 3: Chemical and electro-chemical tests
Seksyen 3
Bahagian
Part 4 2005
Soils for civil engineering purposes - Test method - Part 4: Compaction tests
Seksyen 4
Bahagian
Part 5 2005
Soils for civil engineering purposes - Test method
-
Bahagian
Part 5:
Compressibility, permeability and durability tests
Seksyen 5
Bahagian
Part 6 2005
Soils for civil engineering purposes - Test method - Part 6: Consolidation and permeability tests in hydraulic cells and with pore pressure measurement
Seksyen 6
Bahagian
Part 7 2005
Soils for civil engineering purposes - Test method - Part 7: Shear strength tests (total stress)
Seksyen 7
Bahagian
Part 8 2005
Soils for civil engineering purposes - Test method - Part 8: Shear strength tests
(effective stress)
Seksyen 8
Bahagian
Part 9 2005
Soils for civil engineering purposes - Test method - Part 9: In-situ tests
Seksyen 9
MS 1265
Bahagian
Part 10 2005
Code of good irradiation practice - Part 10:
Dried meat and dried salted meat of animal origin for insect disinfestations, control of moulds and reduction of pathogenic microorganisms
P.U. (B) 38 4
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 10
MS 1499
Bahagian
Part 2:
Section 2 2005
Sensory evaluation
-
Test preparation - Section 2: Tasting containers for food and drinks
Seksyen 11
Section 5 2005
Household and similar electrical appliances - Safety - Part 2-5: Particular requirements for dishwashers
Seksyen 12
Section 7 2005
Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines
Seksyen 13
Section 24 2005
Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers
Seksyen 14
Section 34 2005
Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors
Seksyen 15
Section 40 2005
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
Seksyen 16
Section 75 2005
Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines
Seksyen 17
MS 1722
Bahagian
Part 1 2005
Occupational safety and health management systems
-
Bahagian
Part 1:
Requirements
Seksyen 18
Section 1 2004
Vehicle security systems: Part 2: Locking systems: Section 1: Specification for locking systems
Seksyen 19
Section 2 2004
Vehicle security systems : Part 2: Locking systems : Section 2: Specification for central power systems
P.U. (B) 38 5
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Seksyen 20
Specification
Section 3 2004
Vehicle security systems: Part 2: Locking systems: Section 3: Specification for dead locking systems
Seksyen 21
Section 4 2005
Vehicle security systems - Part 2: Locking systems - Section 4: Specification for devices for prevention against unauthorised use
Seksyen 22
Fire detection and fire alarm systems -
Bahagian
Part 5: Heat detectors - Point detectors
Seksyen 23
Fire detection and fire alarm systems -
Bahagian
Part 7: Smoke detectors - Point detectors using scattered light, transmitted light or ionisation
Seksyen 24
Fire detection and fire alarm systems -
Bahagian
Part 10: Flame detectors - Point detectors
Seksyen 25
Bahagian
Part 12 2005
Fire detection and fire alarm systems -
Bahagian
Part 12: Smoke detectors - Line detectors using an optical light beam
Seksyen 26
MS 1778
Electrical lighting equipment - Ballasts for fluorescent lamps - Part 1: Measurement of energy consumption and performance of ballast-lamp circuits
Seksyen 27
MS 1778
Electrical lighting equipment - Ballasts for fluorescent lamps - Part 2: Energy labelling and minimum energy performance standard requirements
Seksyen 28
Good Agricultural Practice (GAP) - Part 3:
Seksyen 29
Rubber (Hevea brasiliensis Muell. Arg)
Good Agricultural Practice (GAP) - Part 4:
Seksyen 30
Cocoa (Theobroma Cacao)
Good Agricultural Practice (GAP) - Part 5:
Pepper (Piper nigrum L)
P.U. (B) 38 6
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Seksyen 31
Specification
Petroleum industry - Terminology - Part 1:
Seksyen 32
Raw materials and products
Petroleum industry - Terminology - Part 2:
Seksyen 33
Properties and tests
Petroleum industry - Terminology - Part 3:
Seksyen 34
Exploration and production
Petroleum industry - Terminology - Part 4:
Seksyen 35
Refining
Petroleum industry - Terminology - Part 5:
Seksyen 36
Transport, storage and distribution
Petroleum industry - Terminology - Part 6:
Seksyen 37
Measurement
Petroleum industry - Terminology - Part 7:
Seksyen 38
Miscellaneous terms
Bahagian
Part 99 2005
Petroleum industry
-
Terminology
-
Bahagian
Part 99: General and index
Seksyen 39
MS 1822
2005
Classification and definition of power-driven vehicles and trailers
Seksyen 40
MS 1823
2005
Road vehicles - Large passenger vehicles with regard to the strength of their superstructure
Seksyen 41
MS 1824
2005
Road vehicles - External projections for
M1 vehicles - General requirements
Seksyen 42
MS 1825
2005
Test method for reserve alkalinity of engine coolants and antirusts
Seksyen 43
MS 1826
2005
Road vehicles - Procedure for H-and R-point determination
P.U. (B) 38 7
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 44
MS 1827
Road vehicles - Ignition systems - Part 2:
Electrical performance and function test methods
Seksyen 45
MS 1828
2005
Spheroidal graphite cast iron
–
Classification
Seksyen 46
MS 1829
2005
Cast iron - Designation of microstructure of graphite
Seksyen 47
MS 1830
2005
Standard test method for flash and fire points by cleveland open cup tester
Seksyen 48
MS 1831
2005
Standard test method for kinematic viscosity of transparent (and calculation of dynamic viscosity) (First revision)
Seksyen 49
MS 1832
2005
Standard test method for sulfated ash from lubricating oils and additives
Seksyen 50
MS 1833
2005
Test method for foaming characteristics of lubricating oils
Seksyen 51
MS 1834
2005
Standard test method for base number of petroleum products by potentionic perchloric acid titration
Seksyen 52
MS 1835
2005
Test method for density and relative density of liquids by digital density meter
Seksyen 53
MS 1836
2005
Hydrated lime and slurry lime for use in potable water supply – Specification
Seksyen 54
MS 1837
2005
Installation of grid-connected photovoltaic
(PV) system
Seksyen 55
MS 1838
2005
Heavy duty crimp type cable lugs for use with XLPE insulated and circular compact copper conductors in single and multi core power cable applications up to 36 kV -
Specification for the material, marking and dimensions
P.U. (B) 38 8
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Seksyen 56
Specification
Furniture - Office tables - Part 1:
Seksyen 57
Dimensions
Furniture - Office tables - Part 2:
Seksyen 58
Mechanical safety requirements
Furniture - Office tables - Part 3: Methods for the determination of the stability and the mechanical strength of the structure
Seksyen 59
MS 1840
Bahagian
Part 100
High-voltage switchgear and controlgear -
Bahagian
Part 100: High-voltage alternating-current circuit-breakers
Seksyen 60
MS 1841
2005
Specification for seamless, welded, and heavily cold worked austenitic stainless steel pipes
Seksyen 61
MS 1842
2005
Specification for wrought austenitic stainless steel piping fittings
Seksyen 62
MS 1843
2005
Specification for castings, austenitic, austenitic-ferritic (Duplex) for pressure-containing parts
Seksyen 63
MS 1844
2005
Test method for water vapor content of gaseous fuels using electronic moisture analyzers
Seksyen 64
MS 1845
2005
Flexible retort food pouches - Guidelines for use and handling in the processing environment
Seksyen 65
MS 1846
2005
Steel and steel products - General technical delivery requirements
Seksyen 66
MS 1848
2005
Aluminium and aluminium alloys – Foils
Seksyen 67
MS 1849
2005
Protection of buildings against subterranean termites - Code of practice for prevention, detection and treatment of infestation
P.U. (B) 38 9
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Seksyen 68
Specification
Water quality - Sampling - Part 2:
Seksyen 69
Guidance on sampling techniques
Water quality - Sampling - Part 3:
Seksyen 70
Guidance on the preservation and handling of water samples
Water quality - Sampling - Part 4:
Guidance on sampling from lakes, natural and man-made
Seksyen 71
MS 1851
2005
Road vehicles
-
Lighting and light signalling devices for motor vehicles -
Direction indicator lamps - Requirements
Seksyen 72
MS 1852
2005
Road vehicles - Lateral protection for goods vehicles, trailers and semi-trailers
Seksyen 73
MS 1853
2005
Road vehicles - The behaviour of the structure of the impacted vehicle in a rear-end collision - Specification
Seksyen 74
MS 1855
2005
Clothes washing machines for household use
-
Methods for measuring the performance
Seksyen 75
MS 1856
2005
Test method for Environmental Stress
Crack
Resistance
(ESCR)
of plastics tighthead drums not exceeding 60 Gal
(227 L) in rated capacity
Seksyen 76
MS 1857
2005
Test method for Environmental Stress
Crack Resistance (ESCR) of threaded plastics closures
Seksyen 77
MS 1858
2005
Rigid plastics containers - Method for determination of drainability
Seksyen 78
MS 1859
2005
Fresh chokanan mango – Specification
Seksyen 79
MS 1860
2005
Herbs and herbal products – Vocabulary
Seksyen 80
MS 1861
2005
Spring units for mattresses – Specification
P.U. (B) 38 10
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 81
MS 1862
2005
Carbon steel tubes for machine structural purposes – Specification
Seksyen 82
MS 1863
2005
Cold headed rivets – Specification
Seksyen 83
MS 1865
2005
Essential oils - General rules for packaging, conditioning and storage
Seksyen 84
MS 1866
2005
Essential oils - General rules for labelling and marking of containers
Seksyen 85
MS 1867
2005
Test method for sulfur in petroleum gas by oxidative microcoulometry
Seksyen 86
MS 1868
2005
Opacimeters
-
Specification and correlation between HSU and other diesel smoke measuring units
Seksyen 87
MS 1869
2005
Water quality - Enumeration of culturable micro-organisms
-
Colony count by inoculation in a nutrient agar culture medium
Seksyen 88
MS 1870
2005
Gas meters - Diaphragm gas meters
Seksyen 89
MS 1871
2005
Flexible cellular polymeric materials -
Determination of compression set
Seksyen 90
MS 1872
2005
Flexible cellular polymeric materials -
Determination of compression set under humid conditions
Seksyen 91
MS 1874
2005
Starches and derived products
-
Determination of total ash
Seksyen 92
MS 1876
2005
Starches and derived products
-
Determination of sulphur dioxide (Tanner method)
Seksyen 93
MS 1877
2005
Starches and derived products
-
Determination of acidity
P.U. (B) 38 11
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 94
MS 1878 2005
Starches and derived products
-
Determination of pH of aqueous extract
Seksyen 95
MS 1879
2005
Starches and derived products - Methods for the determination of starch content
Seksyen 96
MS 1880
Soil quality – Vocabulary: Part 4: Terms and definitions related to the rehabilitation of soils and sites
Seksyen 97
MS 1881
2005
Quality control inspection of 16 mm and 35 mm black and white, silver - Gelatin type microfilm - Code of practice
Seksyen 98
MS 1882
2005
Piston type float operated valves –
Specification
Seksyen 99
MS 1884
2005
Road vehicles - Protection of the driver against the steering mechanism in the event of impact – Specification
Seksyen 100
MS 1885
2005
Road vehicles
-
Passenger cars
-
Arrangement of foot controls
Seksyen 101
MS 1886
2005
Test method for pH of aqueous solutions with the glass electrode
Seksyen 102
MS 1887
2005
Test method for particle size of soaps and other detergents
Seksyen 103
MS 1889
2005
Test methods for electrical conductivity of aviation and distillate fuels
Seksyen 104
MS 1890
2005
Test method for calculated cetane index of distillate fuels
Seksyen 105
MS 1891
2005
Test method for sulphur in petroleum products by wavelength dispersive x-ray fluorescence spectrometry
Seksyen 106
MS 1892
2005
Test method for evaluating lubricity of diesel fuels by the high-frequency reciprocating rig (HFRR)
P.U. (B) 38 12
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 107
MS 1893
2005
Test method for density, relative density
(specific gravity), or API gravity of crude petroleum and liquid petroleum products by hydrometer method
Seksyen 108
MS 1894
2005
Test method for determination of benzene, toluene, ethylbenzene, p/m-xylene, o-xylene, C9 and heavier aromatics, and total aromatics in finished gasoline by gas chromatography
Seksyen 109
MS 1895
2005
Test method for cetane number of diesel fuel oil
Seksyen 110
MS 1896
2005
Test method for evaluating load containment performance of stretch wrap films by vibration testing
Seksyen 111
MS 1897
2005
Test method for evaluating abrasion resistance of stretch wrap films by vibration testing
Seksyen 112
MS 1898
2005
Test method for protrusion puncture resistance of stretch wrap film
Seksyen 113
MS 1899
2005
Test methods for hot seal strength (hot tack) of thermoplastic polymers and blends comprising the sealing surfaces of flexible webs
Seksyen 114
MS 1900
2005
Quality management systems
-
Requirements from Islamic perspectives
Seksyen 115
MS 2000
2005
Test method for water vapor transmission rate through plastics film and sheeting using a modulated infrared sensor
Seksyen 116
MS 2001
2005
Test method for peel cling of stretch wrap film
Seksyen 117
MS 2002
2005
Road vehicles - Location of hand controls, indicators and tell-tales in motor vehicles
P.U. (B) 38 13
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 118
MS 2003
2005
Rubber, raw natural and raw synthetic -
Sampling and further preparative procedures
Seksyen 119
MS CISPR 16
Bahagian
Part 1 2001
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1 : Radio disturbance and immunity measuring apparatus (First revision)
Seksyen 120
60034
Rotating electrical machines - Part 1:
Rating and performance
Seksyen 121
60061
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1:
Lamp caps
Seksyen 122
60061
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2:
Lamp holders
Seksyen 123
60061
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3:
Gauges
Seksyen 124
60061
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 4:
Guidelines and general information
Seksyen 125
60076
Power transformers - Part 1: General
Seksyen 126
60076
Power transformers - Part 2: Temperature rise
Seksyen 127
60076
Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air
P.U. (B) 38 14
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 128
60076
Power transformers - Part 4: Guide to the lightning impulse and switching impulse testing - Power transformers and reactors
Seksyen 129
60076
Power transformers - Part 5: Ability to withstand short circuit
Seksyen 130
60076
Power transformers - Part 8: Application guide
Seksyen 131
60076
Power transformers
-
Bahagian
Part 10:
Determination of sound levels
Seksyen 132
60079
Electrical apparatus for explosive gas atmospheres - Part 26: Construction, test and marking of Group II Zone 0 electrical apparatus
Seksyen 133
60269
Low-voltage fuses - Part 1: General requirements
Seksyen 134
60269
Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (Fuses mainly for industrial application)
Seksyen 135
60269
Bahagian
Part 4:
Section 1 2005
Low-voltage fuses
-
Bahagian
Part 4-1:
Supplementary requirements for fuse-links for the protection of semiconductor devices - Sections i to iii: Examples of types of standardized fuse-links
Seksyen 136
60335
Section 21 2005
Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters
Seksyen 137
60335
Section 25 2005
Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens
P.U. (B) 38 15
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 138
60335
Section 44 2005
Household and similar electrical appliances - Safety - Part 2-44: Particular requirements for ironers
Seksyen 139
60335
Section 47 2005
Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans
Seksyen 140
60335
Section 48 2005
Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
Seksyen 141
60335
Section 50 2005
Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie
Seksyen 142
60335
Section 54 2005
Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface
-
Cleaning appliances for household use employing liquids
Seksyen 143
60439
Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
Seksyen 144
60439
Low-voltage switchgear and controlgear assemblies
-
Particular requirements for
Assemblies for
Construction Sites (ACS)
Seksyen 145
60601
Section 1 2005
Medical electrical equipment - Part 1-1:
General requirements for safety
-
Collateral standard: Safety requirements for medical electrical systems
Seksyen 146
60694
2005
Common specifications for high-voltage switchgear and controlgear standards
P.U. (B) 38 16
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 147
60721
Bahagian
Part 3:
Section 7 2005
Classification of environmental conditions
- Part 3-7: Classification of groups of environmental parameters and their severities - Portable and non-stationary use
Seksyen 148
60745
Bahagian
Part 2-1 2005
Hand-held motor-operated electric tools -
Safety - Part 2-1: Particular requirements for drills and impact drills
Seksyen 149
60745
Bahagian
Part 2-3 2005
Safety of handheld motor-operated electric tools - Part 2-3: Particular requirements for grinders, polishers and disk-type sanders
Seksyen 150
60745
Bahagian
Part 2-4 2005
Hand-held motor-operated electric tools -
Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
Seksyen 151
60745
Bahagian
Part 2-5 2005
Hand-held motor-operated electric tools -
Safety - Part 2-5: Particular requirements for circular saws and circular knives
Seksyen 152
60745
Bahagian
Part 2-7 2005
Safety of hand-held motor-operated electric tools - Part 2-7: Particular requirements for spray guns for non-flammable liquids
Seksyen 153
60745
Bahagian
Part 2-11 2005
Hand-held motor-operated electric tools -
Safety - Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws)
Seksyen 154
60745
Bahagian
Part 2-14 2005
Hand-held motor-operated electric tools -
Safety - Part 2-14: Particular requirements for planers requirements for planers
Seksyen 155
60745
Section 17 2005
Hand-held motor-operated electric tools -
Safety - Part 2-17: Particular requirements for routers and trimmers
P.U. (B) 38 17
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 156
60947
Section 2 2005
Low-voltage switchgear and controlgear -
Bahagian
Part 4-2: Contactors and motor-starters -
AC semiconductor motor controllers and starters
Seksyen 157
60947
Section 1 2005
Low voltage switchgear and controlgear -
Bahagian
Part 5-1: Control circuits devices and switching elements - Electromechanical control circuit devices
Seksyen 158
60947
Section 2 2005
Low - voltage switchgear and controlgear -
Bahagian
Part 5-2: Control circuit devices and switching elements - proximity switches
Seksyen 159
60974
Arc welding equipment - Part 1: Welding power sources
Seksyen 160
60998
Connecting devices for low-voltage circuits for household and similar purposes -
Bahagian
Part 1: General requirements
Seksyen 161
60998
Section 1 2005
Connecting devices for low-voltage circuits for household and similar purposes -
Bahagian
Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
Seksyen 162
60998
Section 2 2005
Connecting devices for low-voltage circuits for household and similar purposes -
Bahagian
Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
Seksyen 163
60998
Connecting devices for low-voltage circuits for household and similar purposes -
Bahagian
Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units
Seksyen 164
60998
Connecting devices for low-voltage circuits for household and similar purposes -
Bahagian
Part 2-4: Particular requirements for twist-on connecting devices
P.U. (B) 38 18
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 165
60998
Connecting devices for low-voltage circuits for household and similar purposes -
Bahagian
Part 2-5: Particular requirements for connecting boxes
(junction and/or tapping) for terminals or connecting devices
Seksyen 166
61000
Section 11 2005
Electromagnetic compatibility (EMC) -
Bahagian
Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems -
Equipment with rated current less than 75A and subject to conditional connection
Seksyen 167
61000
Section 12 2005
Electromagnetic compatibility (EMC) -
Bahagian
Part 3-12: Limits-Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current greater than 16 A and less than and equal to 75A per phase
Seksyen 168
61347
Section 11 2005
Lamp control gear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires
Seksyen 169
61558
Safety of power transformers, power supply units and similar - Part 1: General requirements and tests
Seksyen 170
61558
Section 1 2005
Safety of power transformers, power supply units and similar - Part 2-1:
Particular requirements for separating transformers for general use
Seksyen 171
61558
Section 2 2005
Safety of power transformers, power supply units and similar - Part 2-2:
Particular requirements for control transformers
Seksyen 172
61558
Section 3 2005
Safety of power transformers, power supply units and similar devices - Part 2-3:
Particular requirements for ignition transformers for gas and oil burners
P.U. (B) 38 19
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 173
61558
Section 4 2005
Safety of power transformers, power supply units and similar - Part 2-4:
Particular requirements for isolating transformers for general use
Seksyen 174
61558
Section 5 2005
Safety of power transformers, power supply units and similar - Part 2-5:
Particular requirements for shaver transformers and shaver supply units
Seksyen 175
61558
Section 6 2005
Safety of power transformers, power supply units and similar - Part 2-6:
Particular requirements for safety isolating transformers for general use
Seksyen 176
61995
Devices for the connection of luminaires for household and similar purposes -
Seksyen 177
62208
2005
Empty enclosures for low-voltage switchgear and controlgear assemblies -
General requirements
Seksyen 178
62271
High-voltage switchgear and controlgear -
Bahagian
Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1
kV and up to and including 52 kV
Seksyen 179
MS ISO 204
2005
Metallic materials - Uninterrupted unaxial creep testing in tension - Method of test
Seksyen 180
MS ISO 212
2005
Essential oils - Sampling
Seksyen 181
MS ISO 293
2005
Plastics - Compression moulding of test specimens of thermoplastic materials
Seksyen 182
MS ISO 295
2005
Plastics - Compression moulding of test specimens of thermosetting materials
Seksyen 183
MS ISO 306
2005
Plastics
-
Thermoplastic materials
-
Determination of
Vicat
Softening
Temperature (VST)
P.U. (B) 38 20
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 184
MS ISO 356
2005
Essential oils - Preparation of test samples
Seksyen 185
MS ISO 456
2005
Surface active agents - Analysis of soaps -
Determination of free caustic alkali
Seksyen 186
MS ISO 611
2005
Road vehicles - Braking of automotive vehicles and their trailers - Vocabulary
Seksyen 187
MS ISO 612
2005
Road vehicles - Dimensions of motor vehicles and towed vehicles - Terms and definitions
Seksyen 188
MS ISO 862
2005
Seksyen 189
Surface active agents - Vocabulary
Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions
Seksyen 190
Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding
Seksyen 191
Fibre-reinforced plastics - Methods of producing test plates - Part 3: Wet compression moulding
Seksyen 192
Fibre-reinforced plastics - Methods of producing test plates - Part 4: Moulding of prepregs
Seksyen 193
Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding
Seksyen 194
Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding
Seksyen 195
Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding
P.U. (B) 38 21
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Seksyen 196
Specification
Fibre-reinforced plastics - Methods of producing test plates
-
Bahagian
Part 8:
Compression moulding of SMC and BMC
Seksyen 197
Fibre-reinforced plastics - Methods of producing test plates - Part 9: Moulding of
Seksyen 198
GMT/STC
Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens
Seksyen 199
Bahagian
Part 11 2005
Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates
Seksyen 200
MS ISO 1604
5
Belt drives - Endless wide v-belts for industrial speed - Changers and groove profiles for corresponding pulleys
Seksyen 201
MS ISO 2248
2005
Packaging - Complete, filled transport packages
-
Vertical impact test by dropping
Seksyen 202
MS ISO 2415
2005
Forged shackles for general lifting purposes - Dee shackles and bow shackles
Seksyen 203
MS ISO 2471
2005
Paper and board - Determination of opacity
(paper backing)
-
Diffuse reflectance method
Seksyen 204
MS ISO 2942
2005
Hydraulic fluid power filter elements -
Verification of fabrication integrity and determination of the first bubble point
Seksyen 205
MS ISO 3253
2005
Gas welding equipment - Hose connections for equipment for welding, cutting and related processes
P.U. (B) 38 22
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 206
MS ISO 3272
Microfilming of technical drawings and other drawing office documents - Part 2:
Quality criteria and control of 35 mm silver gelatin microfilms
Seksyen 207
MS ISO 3334
2005
Micrographics - ISO resolution test chart no. 2 - Description and use
Seksyen 208
MS ISO 3553
Road vehicles - High-tension connections for ignition coils and distributors - Part 1:
Socket-type
Seksyen 209
MS ISO 3553
Road vehicles - High-tension connections for ignition coils and distributors - Part 2:
Plug types
Seksyen 210
MS ISO 3635
2005
Size designation of clothes - Definitions and body measurement procedure
Seksyen 211
MS ISO 3636
2005
Size designation of clothes - Men's and boys’ outerwear garments
Seksyen 212
MS ISO 3637
2005
Size designation of clothes - Women's and girls' outerwear garments
Seksyen 213
MS ISO 3638
2005
Size designation of clothes - Infants'
garments
Seksyen 214
MS ISO 3958
2005
Passenger cars - Driver hand-control reach
Seksyen 215
MS ISO 3996
2005
Road vehicles - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid
Seksyen 216
MS ISO 4020
2005
Road vehicles - Fuel filters for diesel engines - Test methods
Seksyen 217
MS ISO 4026
2005
Hexagon socket set screws with flat point
Seksyen 218
MS ISO 4027
2005
Hexagon socket set screws with cone point
Seksyen 219
MS ISO 4028
2005
Hexagon socket set screws with dog point
P.U. (B) 38 23
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 220
MS ISO 4029
2005
Hexagon socket set screws with cup point
Seksyen 221
MS ISO 4038
2005
Road vehicles - Hydraulic braking systems
- Simple flare pipes, tapped holes, male fittings and hose end fittings
Seksyen 222
MS ISO 4281
2005
Sodium hexafluorosilicate for industrial use - Determination of free acidity and total hexafluorosilicate content
-
Titrimetric method
Seksyen 223
MS ISO 4415
2005
Seksyen 224
Size designation of clothes - Men's and boys' underwear, nightwear and shirts
Methods of test for full-flow lubricating oil filters for internal combustion engines –
Differential pressure/flow characteristics
Seksyen 225
Methods of test for full-flow lubricating oil filters for internal combustion engines –
Element by-pass valve characteristics
Seksyen 226
Methods of test for full-flow lubricating oil filters for internal combustion engines -
Bahagian
Part 3: Resistance to high differential pressure and to elevated temperature
Seksyen 227
Methods of test for full-flow lubricating oil filters for internal combustion engines -
Bahagian
Part 4: Initial particle retention efficiency, life and cumulative efficiency (gravimetric method)
Seksyen 228
Methods of test for full-flow lubricating oil filters for internal combustion engines -
Bahagian
Part 5: Cold start simulation and hydraulic pulse durability test
Seksyen 229
Methods of test for full-flow lubricating oil filters for internal combustion engines -
Bahagian
Part 6: Static burst pressure test
P.U. (B) 38 24
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 230
Methods of test for full-flow lubricating oil filters for internal combustion engines -
Bahagian
Part 7: Vibration fatigue test
Seksyen 231
Methods of test for full-flow lubricating oil filters for internal combustion engines -
Bahagian
Part 9: Inlet and outlet anti-drain valve tests
Seksyen 232
Methods of test for full-flow lubricating oil filters for internal combustion engines -
Bahagian
Part 11: Self-cleaning filters
Seksyen 233
Methods of test for full-flow lubricating oil filters for internal combustion engines –
Bahagian
Part 12: Filtration efficiency using particle counting, and contaminant retention capacity
Seksyen 234
MS ISO 4720
2005
Essential oils - Nomenclature
Seksyen 235
MS ISO 5011
2005
Inlet air cleaning equipment for internal combustion engines and compressors -
Performance testing
Seksyen 236
MS ISO 5171
2005
Pressure gauges used in welding, cutting and allied processes
Seksyen 237
MS ISO 5444
2005
Sodium hexafluorosilicate for industrial use - Determination of loss in mass at 105 °C
Seksyen 238
MS ISO 5893
2005
Rubber and plastics test equipment -
Tensile, flexural and compression types
(constant rate of traverse) – Specification
Seksyen 239
MS ISO 5922
2005
Malleable cast iron - Specification
Seksyen 240
MS ISO 6120
2005
Road vehicles - Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid
P.U. (B) 38 25
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Seksyen 241
Specification
Micrographics - Vocabulary - Part 1:
Seksyen 242
General terms
Micrographics - Vocabulary - Part 2: Image positions and methods of recording
Seksyen 243
Micrographics - Vocabulary - Part 4:
Seksyen 244
Materials and packaging
Micrographics - Vocabulary - Part 5:
Quality of images, legibility and inspection
Seksyen 245
MS ISO 6199
2005
Micrographics
-
Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm
-
Operating procedures
Seksyen 246
MS ISO 6200
2005
Micrographics - First generation silver-gelatin microforms of source documents -
Density specifications and method of measurement
Seksyen 247
MS ISO 6385
2005
Ergonomic principles in the design of work systems
Seksyen 248
MS ISO 6487
2005
Road vehicles - Measurement techniques in impact tests instrumentation
Seksyen 249
MS ISO 6518
Road vehicles - Ignition systems: Part 1:
Vocabulary
Seksyen 250
MS ISO 6590
Packaging - Sacks - Vocabulary and types -
Bahagian
Part 1: Paper sacks
Seksyen 251
MS ISO 6599
Packaging - Sacks - Conditioning for testing - Part 1: Paper sacks
Seksyen 252
MS ISO 6870
2005
Animal feeding stuffs
-
Qualitative determination of zearalenone content
Seksyen 253
MS ISO 7088
2005
Fish-meal - Vocabulary
P.U. (B) 38 26
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 254
MS ISO 7500
Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied load
Seksyen 255
MS ISO 7888
2005
Water quality - Determination of electrical conductivity
Seksyen 256
MS ISO 7965
Packaging - Sacks - Drop test - Part 1:
Paper sacks
Seksyen 257
MS ISO 7965
Packaging - Sacks - Drop test - Part 2:
Sacks made from thermoplastic flexible film
Seksyen 258
MS ISO 8013
2005
Rubber, vulcanized - Determination of creep in compression or shear
Seksyen 259
MS ISO 8062
2005
Castings
-
System of dimensional tolerances and machining allowances
Seksyen 260
MS ISO 8092
Road vehicles - Connections for on board electrical wiring harnesses Part 1: Tabs for single-pole connections - Dimensions and specific requirements
Seksyen 261
MS ISO 8092
Road vehicles - Connections for on board electrical wiring harnesses
Definitions, test methods and general performance requirements
Seksyen 262
MS ISO 8295
2005
Plastics
-
Film and sheeting
-
Determination of the coefficients of friction
Seksyen 263
MS ISO 8351
Packaging - Method of specification for sacks - Part 1: Paper sacks
Seksyen 264
MS ISO 8351
Packaging - Method of specification for sacks
-
Sacks made from thermoplastic flexible film
P.U. (B) 38 27
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 265
MS ISO 8789
2005
Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles -
Specification
Seksyen 266
MS ISO 9090
2005
Gas tightness of equipment for gas welding and allied processes
Seksyen 267
MS ISO 9151
2005
Protective clothing against heat and flame
- Determination of heat transmission on exposure to flame
Seksyen 268
MS ISO 9198
2005
Paper, board and pulp - Determination of water-soluble sulfates
Seksyen 269
MS ISO 9241
Ergonomic requirements for office work with Visual Display Terminals (VDTs) -
Bahagian
Part 5: Workstation layout and postural requirements
Seksyen 270
MS ISO 9539
2005
Materials for equipment used in gas welding, cutting and allied processes
Seksyen 271
MS ISO 9599
2005
Copper, lead and zinc sulfide concentrates
- Determination of hygroscopic moisture in the analysis sample - Gravimetric method
Seksyen 272
MS ISO 9696
2005
Water quality - Measurement of gross alpha activity in non-saline water - Thick source method
Seksyen 273
MS ISO 9697
2005
Water quality - Measurement of gross beta activity in non-saline water
Seksyen 274
MS ISO 9698
2005
Water quality - Determination of tritium activity concentration - Liquid scintillation counting method
Seksyen 275
MS ISO 9711
Freight containers - Information related to containers on board vessels - Part 1: Bay plan system
P.U. (B) 38 28
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 276
MS ISO 9809
Gas cylinders - Refillable seamless steel gas cylinders - Design, construction and testing - Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa
Seksyen 277
10007
2005
Quality management systems – Guidelines for configuration management
Seksyen 278
10258
2005
Copper sulfide concentrates
-
Determination of copper content
-
Titrimetric methods
Seksyen 279
10319
2005
Geotextiles - Wide-width tensile test
Seksyen 280
10374
2005
Freight containers
-
Automatic identification
Seksyen 281
10378
2005
Copper sulfides concentrates
-
Determination of gold and silver contents -
Fire assay gravimetric and flame atomic absorption spectrometric method
Seksyen 282
10455
2005
Road vehicles - Dry ignition coils using rotating high-voltage distributor
Seksyen 283
10469
2005
Copper sulfide concentrates
-
Determination of copper content
-
Electrogravimetric method
Seksyen 284
10703
2005
Water quality - Determination of the activity concentration of radionuclides by high resolution gamma-ray spectrometry
Seksyen 285
10993
Biological evaluation of medical devices -
Bahagian
Part 1: Evaluation and testing
Seksyen 286
10993
Biological evaluation of medical devices -
Tests for genotoxicity, carcinogenicity and reproductive toxicity
P.U. (B) 38 29
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 287
10993
Bahagian
Part 13 2005
Biological evaluation of medical devices -
Bahagian
Part 13: Identification and quantification of degradation products from polymeric medical devices
Seksyen 288
10993
Bahagian
Part 16 2005
Biological evaluation of medical devices -
Bahagian
Part 16: Toxicokinetic study design for degradation products and leachables
Seksyen 289
10993
Bahagian
Part 17 2005
Biological evaluation of medical devices -
Bahagian
Part 17: Establishment of allowable limits for leachable substances
Seksyen 290
11058
2005
Geotextiles and geotextile-related products
-
Determination of water permeability characteristics normal to the plane, without load
Seksyen 291
11154
Road vehicles - Roof load carriers - Part 1 :
Roof bars
Seksyen 292
11501
2005
Plastics
-
Film and sheeting
-
Determination of dimensional change on heating
Seksyen 293
11612
2005
Clothing for protection against heat and flame - Test methods and performance requirements for heat-protective clothing
Seksyen 294
11759
2005
Rubber hoses and hose assemblies for dispensing Liquefied Petroleum Gases
(LPGs) – Specification
Seksyen 295
12103
Road vehicles - Test dust for filter evaluation - Part 1: Arizona test dust
Seksyen 296
12103
Road vehicles - Test dust for filter evaluation - Part 2: Aluminium oxide test dust
P.U. (B) 38 30
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 297
12127
2005
Clothing for protection against heat and flame - Determination of contact heat transmission through protective clothing or constituent materials
Seksyen 298
12236
2005
Geotextiles and geotextile-related products - Static puncture test (CBR test)
Seksyen 299
13007
Ceramic tiles - Grouts and adhesives -
Terms, definitions and specifications for adhesives
Seksyen 300
13007
Ceramic tiles - Grouts and adhesives -
Bahagian
Part 2: Test methods for adhesives
Seksyen 301
13007
Ceramic tiles - Grouts and adhesives -
Bahagian
Part 3: Definitions and specifications for grouts
Seksyen 302
13686
2005
Natural gas - Quality designation
Seksyen 303
13849
Safety of machinery - Safety-related parts of control systems - Part 2: Validation
Seksyen 304
14122
Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders
Seksyen 305
14819
Traffic and Traveller Information (TTI) -
TTI messages via traffic message coding -
Bahagian
Part 1: Coding protocol for Radio Data
System - Traffic Message Channel (RDS-TMC) using Alert-C
Seksyen 306
14819
Traffic and Traveller Information (TTI) -
TTI messages via traffic message coding -
Bahagian
Part 2: Event and information codes for
Radio Data System - Traffic Message
Channel (RDS-TMC)
Seksyen 307
14825
2005
Intelligent transport systems - Geographic
Data
Files
(GDF)
-
Overall data specification
P.U. (B) 38 31
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 308
14877
2005
Protective clothing for abrasive blasting operations using granular abrasives
Seksyen 309
15025
2005
Protective clothing - Protection against heat and flame - Method of test for limited flame spread
Seksyen 310
15075
2005
Transport information and control systems - In-vehicle navigation systems -
Communications message set requirements
Seksyen 311
15225
2005
Nomenclature
-
Specification for a nomenclature system for medical devices for the purpose of regulatory data exchange
Seksyen 312
15535
2005
General requirements for establishing anthropometric databases
Seksyen 313
15537
2005
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
Seksyen 314
17386
2005
Transport information and control systems - Manoeuvring Aids for Low Speed
Operation
(MALSO)
-
Performance requirements and test procedures
Seksyen 315
17491
2005
Protective clothing - Protection against gaseous and liquid chemicals
-
Determination of resistance of protective clothing to penetration by liquids and gases
Seksyen 316
18757
2005
Fine ceramics
(advanced ceramics, advanced technical ceramics)
-
Determination of specific surface area of ceramic powders by gas adsorption using the BET method
P.U. (B) 38 32
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 317
18901
2005
Imaging materials - Processed silver-gelatin type black-and-white films
-
Specifications for stability
Seksyen 318
19353
2005
Safety of machinery - Fire prevention and protection
Seksyen 319
19438
2005
Diesel fuel and petrol filters for internal combustion engines - Filteration efficiency using particle counting and contaminant retention capacity
Seksyen 320
21572
2005
Foodstuffs - Methods for the detection of genetically modified organisms and derived products - Protein based methods
Seksyen 321
51204
2005
Practice for dosimetry in gamma irradiation facilities for food processing
Seksyen 322
51261
2005
Guide for selection and calibration of dosimetry systems for radiation processing
Seksyen 323
51431
2005
Practice for dosimetry in electron and bremsstrahlung irradiation facilities for food processing
Seksyen 324
2382
Information technology - Vocabulary -
Bahagian
Part 1: Fundamental terms
Seksyen 325
2382
Information technology - Vocabulary -
Bahagian
Part 5: Representation of data
Seksyen 326
2382
Information technology - Vocabulary -
Bahagian
Part 7: Computer programming
Seksyen 327
2382
Information technology - Vocabulary -
Bahagian
Part 9: Data communication
Seksyen 328
2382
Information technology - Vocabulary - Part 17: Databases
P.U. (B) 38 33
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 329
2382
Bahagian
Part 18 2005
Information technology - Vocabulary -
Bahagian
Part 18: Distributed data processing
Seksyen 330
2382
Bahagian
Part 20 2005
Information technology - Vocabulary -
Bahagian
Part 20: System development
Seksyen 331
2382
Bahagian
Part 24 2005
Information technology - Vocabulary -
Bahagian
Part 24:
Computer-integrated manufacturing
Seksyen 332
2382
Bahagian
Part 27 2005
Information technology – Vocabulary -
Bahagian
Part 27: Office automation
Seksyen 333
2382
Bahagian
Part 28 2005
Information technology - Vocabulary -
Bahagian
Part 28: Artificial intelligence - Basic concepts and expert systems
Seksyen 334
2382
Bahagian
Part 29 2005
Information technology - Vocabulary -
Bahagian
Part 29: Artificial intelligence - Speech recognition and synthesis
Seksyen 335
2382
Bahagian
Part 31 2005
Information technology - Vocabulary -
Bahagian
Part 31: Artificial intelligence - Machine learning
Seksyen 336
2382
Bahagian
Part 32 2005
Information technology - Vocabulary -
Bahagian
Part 32: Electronic mail
Seksyen 337
2382
Bahagian
Part 34 2005
Information technology - Vocabulary -
Bahagian
Part 34: Artificial intelligence - Neural networks
Seksyen 338
13888
IT security techniques - Non-repudiation -
Bahagian
Part 1: General
Seksyen 339
13888
Information technology
-
Security techniques - Non-repudiation - Part 2:
Mechanisms using symmetric techniques
Seksyen 340
13888
Information technology
-
Security techniques - Non-repudiation - Part 3:
Mechanisms using asymmetric techniques
P.U. (B) 38 34
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 341
15408
Information technology
-
Security techniques - Evaluation criteria for IT security - Part 1: Introduction and general model
Seksyen 342
15408
Information technology
-
Security techniques - Evaluation criteria for IT security - Part 2: Security functional requirements
Seksyen 343
15504
Information technology
-
Process assessment - Part 1: Concepts and vocabulary
Seksyen 344
15504
Software
Engineering
-
Process assessment - Part 2: Performing an assessment
Seksyen 345
15504
Information technology
-
Process assessment
-
Guidance on performing an assessment
Seksyen 346
15504
Information technology
-
Process assessment - Part 4: Guidance on use for process improvement and process capability determination
Seksyen 347
17011
2005
Conformity assessment
-
General requirements for accreditation bodies accrediting conformity assessment bodies
Seksyen 348
18033
Information technology
-
Security techniques - Encryption algorithms -
Seksyen 349
18033
Information technology
-
Security techniques - Encryption algorithms -
Bahagian
Part 3: Block ciphers
Seksyen 350
18033
Information technology
-
Security techniques - Encryption algorithms -
Bahagian
Part 4: Stream ciphers
P.U. (B) 38 35
Nombor
Penentuan/
Specification
Number
Bahagian/
Part
Tahun/
Year
Penentuan/
Specification
Seksyen 351
18045
2005
Information technology
-
Security techniques - Methodology for IT security evaluation
Seksyen 352
7811
Identification cards - Recording technique
- Part 7: Magnetic stripe - High coercivity, high density
Seksyen 353
GUIDE 53
2005
Conformity assessment - Guidance on the use of an organisation's quality management system in product certification
Seksyen 354
15000
Electronic business extensible markup language (ebXML) - Part 1: Collaboration-protocol profile and agreement specification (ebCPP)
Seksyen 355
15000
Electronic business extensible markup language (ebXML) - Part 3: Registry information model specification (ebRIM)
Seksyen 356
15000
Electronic business extensible markup language (ebXML) - Part 4: Registry services specification (ebRS)
Bertarikh 6 Januari 2014
Dated 6 January 2014
[JSM/SD-600/12/13 Jld. 7; PN(PU2)559/VI]
DATUK DR. EWON EBIN
Menteri Sains, Teknologi dan Inovasi/
Minister of Science, Technology and Innovations
Common questions
- What is Perisytiharan Penentuan Standard?
- Perisytiharan Penentuan Standard is Malaysia P.U. (B), cited as P.U. (B) 38 2014, currently marked in force and first recorded in 2014.
- Is Perisytiharan Penentuan Standard still in force?
- Yes — Perisytiharan Penentuan Standard is currently in force.
- When did Perisytiharan Penentuan Standard take effect?
- Perisytiharan Penentuan Standard was first recorded in 2014.
- How many sections does Perisytiharan Penentuan Standard have?
- Perisytiharan Penentuan Standard contains 356 sections.
- Where can I read the official version of Perisytiharan Penentuan Standard?
- The official text of Perisytiharan Penentuan Standard is published at lom.agc.gov.my.
Something wrong on this page?
If one provision's text doesn't match the official source, use Suggest a fix beside that provision — it opens an editor next to the source document. For anything else — a missing amendment, a broken link, out-of-date content, or a removal request — report it here.