Skip to content
mylaw.my
P.U. (B)In force

Perisytiharan Penentuan Standard

The full official text, structured for quick navigation. Copy any provision or jump straight to a section.

Open source PDFReport an issue
Enacted
2012
Sections
402

Perisytiharan Penentuan Standard is Malaysia P.U. (B), cited as P.U. (B) 246 2012, currently marked in force and first recorded in 2012.

Front matterCover and publication detailsOpen
Suggest a fix

WARTA KERAJAAN PERSEKUTUAN

FEDERAL GOVERNMENT

GAZETTE

PERISYTIHARAN PENENTUAN STANDARD

DECLARATION OF STANDARD SPECIFICATIONS

DISIARKAN OLEH/

JABATAN PEGUAM NEGARA/

ATTORNEY GENERAL’S CHAMBERS

2

AKTA STANDARD MALAYSIA 1996

PERISYTIHARAN PENENTUAN STANDARD

Opening note

Preamble

Suggest a fix
  1. PADA menjalankan kuasa yang diberikan oleh subseksyen 15(1) Akta Standard Malaysia 1996 [Akta 549], Menteri mengisytiharkan pemakaian penentuan yang disenaraikan dalam Jadual menjadi penentuan standard bagi maksud Akta ini. STANDARDS OF MALAYSIA ACT 1996 DECLARATION OF STANDARD SPECIFICATIONS

Opening note

Preamble

Suggest a fix
  1. IN exercise of the powers conferred by subsection 15(1) of the Standards of Malaysia Act 1996 [Act 549], the Minister declares the application of the specifications listed in the Schedule to be the standard specifications for the purpose of this Act. 3 JADUAL/SCHEDULE No. Nombor Penentuan Specification Number Bahagian Part Tahun Year Penentuan Specification

Seksyen 1

Open as pageSuggest a fix

Part F8 2008

Paints and varnishes

-

Part

F8:

Determination of resistance to humid atmospheres containing sulfur dioxide

Seksyen 2

Open as pageSuggest a fix

Part F19 2008

Paints and varnishes - Determination of resistance to cyclic corrosion conditions -

Part F19: Wet (salt fog)/dry/humidity/UV light

Seksyen 3

Open as pageSuggest a fix

Part F20 2008

Paints and varnishes - Determination of resistance to filiform corrosion - Part F20:

Aluminium substrates

Seksyen 4

Open as pageSuggest a fix

Part F21 2008

Paints and varnishes - Determination of resistance to humidity - Part F21:

Procedure for exposing test specimens in condensation - Water atmospheres

Seksyen 6

Open as pageSuggest a fix

Part G8 2008

Paints and varnishes - Determination of resistance to liquids - Part G8: Water immersion method

Seksyen 7

Open as pageSuggest a fix

Part G9 2008

Paints and varnishes - Determination of water-vapour transmission rate - Part G9:

Dish method for free films

Seksyen 8

Open as pageSuggest a fix

Part G10 2008

Paints and varnishes - Determination of resistance to liquids - Part G10: Method using an absorbent medium

Seksyen 9

Open as pageSuggest a fix

Part G11 2008

Paints and varnishes - Determination of resistance to liquids - Part G11: Spotting methods

Seksyen 10

Open as pageSuggest a fix

Part G12 2008

Paints and varnishes - Determination of resistance to liquids

-

Part

G12:

Temperature-gradient oven method

4

Seksyen 11

Open as pageSuggest a fix

Part H6 2008

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part H6: Assessment of degree of chalking by tape method

Seksyen 12

Open as pageSuggest a fix

Part H7 2008

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part H7: Assessment of degree of chalking by velvet method

Seksyen 13

Open as pageSuggest a fix

Part H8 2008

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part H8: Assessment of degree of delamination and corrosion around a scribe

Seksyen 14

Open as pageSuggest a fix

Part H10 2008

Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part H10: Assessment of degree of filiform corrosion

Seksyen 15

Open as pageSuggest a fix

Part J1 2008

Paints and varnishes - Coating powders -

Part J1: Determination of particle size distribution by sieving

Seksyen 16

Open as pageSuggest a fix

Part J2 2008

Paints and varnishes - Coating powders -

Part J2: Determination of density by gas comparison pyknometer (referee method)

Seksyen 17

Open as pageSuggest a fix

Part J3 2008

Paints and varnishes - Coating powders -

Part J3: Determination of density by liquid displacement pyknometer

Seksyen 18

Open as pageSuggest a fix

Part J4 2008

Paints and varnishes - Coating powders -

Part J4: Calculation of lower explosion limit

Seksyen 19

Open as pageSuggest a fix

Part J5 2008

Paints and varnishes - Coating powders -

Part J5: Determination of flow properties of a powder/air mixture

5

Seksyen 20

Open as pageSuggest a fix

Part J6 2008

Paints and varnishes - Coating powders -

Part J6: Determination of gel time of thermosetting coating powders at a given temperature

Seksyen 21

Open as pageSuggest a fix

Part J7 2008

Paints and varnishes - Coating powders -

Part J7: Determination of loss of mass on stoving

Seksyen 22

Open as pageSuggest a fix

Part J8 2008

Paints and varnishes - Coating powders -

Part J8: Assessment of the storage stability of thermosetting powders

Seksyen 24

Open as pageSuggest a fix

Part J10 2008

Paints and varnishes - Coating powders -

Part J10: Determination of deposition efficiency

Seksyen 26

Open as pageSuggest a fix

Part J12 2008

Paints and varnishes - Coating powders -

Part J12: Determination of compatibility

Seksyen 27

Open as pageSuggest a fix

Part J13 2008

Paints and varnishes - Coating powders -

Part J13: Particle size analysis by laser diffraction

Bahagian

Part 2 2008

Code of practice for the design of road lighting - Part 2: Lighting of tunnels

Bahagian

Part 3 2008

Polyethylene (PE) piping systems for gaseous fuels supply - Part 3: Fittings

Bahagian

Part 4 2008

Polyethylene (PE) piping systems for gaseous fuels supply - Part 4: Valves

Bahagian

Part 5 2008

Polyethylene (PE) piping systems for gaseous supply - Part 5: Fitness for purpose of the system

Bahagian

Part 6 2008

Polyethylene (PE) piping systems for gaseous supply - Part 6: Guidance for the assessment of conformity

Suggest a fix

6

Bahagian

Part 1 2008

Chlorinated poly (vinyl chloride) (PVC-C)

Suggest a fix

plastic piping systems

-

Bahagian

Part 1:

Bahagian

Part 2:

Specification for schedule 40 socket-type pipe fittings

Bahagian

Part 3:

Specification for schedule 80 pipe fittings

Seksyen 38

Open as pageSuggest a fix

MS 1797

2008

Anhydrous milk fat - Determination of sterol composition by gas liquid chromatography (reference method)

Seksyen 42

Open as pageSuggest a fix

MS 1802

2008

Structural timber grading - Requirements for machine strength graded timber and grading machine

Seksyen 44

Open as pageSuggest a fix

MS 1804

2008

Globally harmonised system (GHS) for classification and labelling of chemicals -

Specification for the classification, labelling and formulation of safety data sheet for chemical products

Seksyen 46

Open as pageSuggest a fix

MS 1965

Information technology

Suggest a fix

-

Software measurement

-

Functional size measurement - Part 6: Guide for use of

ISO/IEC

14143

series and related international standards

Seksyen 48

Open as pageSuggest a fix

Section 1 2008

Suggest a fix

Manual of tests and criteria for transport of dangerous goods - Part 2: Classification procedures, test methods and criteria relating to explosives of Class 1 - Section 1: Introduction to Part 2 - Purpose, scope, acceptance procedure, assignment procedure, example of test report

Seksyen 49

Open as pageSuggest a fix

Section 2 2008

Suggest a fix

Manual of tests and criteria for transport of dangerous goods - Part 2: Classification procedures, test methods and criteria relating to explosives of class 1- Section 2:

Seksyen 50

Open as pageSuggest a fix

Test Series 1

Section 3 2008

Suggest a fix

Manual of tests and criteria for transport of dangerous goods - Part 2: Classification procedures, test methods and criteria relating to explosives of class 1 - Section 3:

Test series 2

Seksyen 53

Open as pageSuggest a fix

MS 2058

2008

Code of practice for good engineering maintenance management of active medical devices

Seksyen 57

Open as pageSuggest a fix

MS 2063

2008

Test method for hydrogen sulfide in liquefied petroleum (LP) gases (lead acetate method)

Seksyen 59

Open as pageSuggest a fix

MS 2065

2008

Test method for density or relative density of light hydrocarbons by pressure hydrometer

Seksyen 60

Open as pageSuggest a fix

MS 2066

2008

Test method for determination of total volatile sulfur in gaseous hydrocarbons and liquefied petroleum gases by ultraviolet fluorescence

Seksyen 61

Open as pageSuggest a fix

MS 2067

2008

Test method for vapor pressure of liquefied petroleum gases

(LPG)

(expansion method)

Seksyen 63

Open as pageSuggest a fix

MS 2069

2008

Practice for determination of volatiles in polymers by static headspace gas chromatography

Seksyen 67

Open as pageSuggest a fix

MS 2073

2008

Eco-labelling criteria for environmentally degradable plastics packaging material

Seksyen 72

Open as pageSuggest a fix

MS 2078

2008

Practice for sampling single or multilayered liquids, with or without solids, in drums or similar containers

Seksyen 77

Open as pageSuggest a fix

MS 2083

2008

Adhesives

-

Wood-to-wood adhesive bonds - Determination of shear strength by tensile loading

Seksyen 78

Open as pageSuggest a fix

MS 2084

2008

Adhesives

-

Wood-to-wood adhesive bonds - Determination of shear strength by compressive loading

Seksyen 79

Open as pageSuggest a fix

MS 2085

2008

Domestic and similar electronic equipment interconnection requirements

- Peritelevision connector

Seksyen 80

Open as pageSuggest a fix

MS 2086

2008

Plastic tubings and hoses for use with commercial propane, commercial butane and their mixtures in the vapour phase-requirements for plastic tubings and hoses

Seksyen 83

Open as pageSuggest a fix

MS 2089

2008

Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications

-

Test methods for leaktightness of elastomeric sealing ring type joints

10

Seksyen 84

Open as pageSuggest a fix

MS 2090

2008

Thermoplastics piping systems - End-load-bearing joints between small diameter pressure pipes and fittings - Test method for leaktightness under internal water pressure, including end thrust

Seksyen 85

Open as pageSuggest a fix

MS 2091

2008

Specification for cautionary labelling for five-gallon open-head plastics containers

Seksyen 86

Open as pageSuggest a fix

MS 2092

2008

Test method for determination of residual acetaldehyde in polyethylene terephthalate bottle polymer using an automated static head-space sampling device and a capillary GC with a flame ionisation detector

Seksyen 88

Open as pageSuggest a fix

MS 2094

2008

Information supplied by the manufacturer with in vitro diagnostic reagents for professional use

Seksyen 95

Open as pageSuggest a fix

Safety requirements

Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids -

Suggest a fix

Safety requirements and additional test methods

11

Bahagian

Part 7 2008

Personal flotation devices - Part 7:

Suggest a fix

Materials and components

-

Safety requirements and test methods

Bahagian

Part 8 2008

Personal flotation devices - Part 8:

Suggest a fix

Accessories - Safety requirements and test methods

Bahagian

Part 9 2008

Personal flotation devices - Part 9: Test methods

Bahagian

Part 10 2008

Personal flotation devices - Part 10:

Suggest a fix

Selection and application of personal flotation devices and other relevant devices

Bahagian

Bahagian 1 2008

Barang gunaan Islam - Bahagian 1:

Suggest a fix

Kosmetik dan dandanan diri - Garis panduan umum

Bahagian

Part 1: Suspended baskets

Seksyen 110

Open as pageSuggest a fix

MS 2207

2008

Animal and vegetable fats and oils -

Determination of oxidative stability

(accelerated oxidation test)

12

Seksyen 111

Open as pageSuggest a fix

MS 300 113

Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech)

Suggest a fix

using constant or non-constant envelope modulation and having an antenna connector;

Technical characteristics and methods of measurement

Seksyen 112

Open as pageSuggest a fix

MS 300 135

Electromagnetic compatibility and radio spectrum matters

Suggest a fix

(ERM);

Angle-modulated citizens band radio equipment

(CEPT PR 27 Radio Equipment); Part 1:

Technical characteristics and methods of measurement

Seksyen 113

Open as pageSuggest a fix

MS 300 220

Electromagnetic compatibility and radio spectrum matters (ERM); Short range devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical...

Seksyen 114

Open as pageSuggest a fix

MS 300 224

Electromagnetic compatibility and radio spectrum matters (ERM); On-site paging service; Part 1: Technical and functional characteristics, including test methods

Seksyen 115

Open as pageSuggest a fix

MS 300 328

2008

Electromagnetic compatibility and radio spectrum matters

(ERM);

Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques, harmonized

EN covering essential requirements under Article 3.2

of the R&TTE directive

Seksyen 116

Open as pageSuggest a fix

MS 300 330

Electromagnetic compatibility and radio spectrum matters (ERM); Short range devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 1...

Suggest a fix

13

Seksyen 117

Open as pageSuggest a fix

MS 300 390

Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service, Radio equipment intended for the transmission of data (and speech) and using an integral antenna;

Technical characteristics and test conditions

Seksyen 118

Open as pageSuggest a fix

MS 300 433

Electromagnetic compatibility and radio spectrum matters (ERM); Land mobile service; Double side band (DSB) and/or single side band

Suggest a fix

(SSB)

amplitude modulated citizen’s band radio equipment;

Technical characteristics and methods of measurement

Seksyen 119

Open as pageSuggest a fix

MS 300 440

Electromagnetic compatibility and radio spectrum matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range;

Bahagian

Part 1: Technical characteristics and test methods

Seksyen 120

Open as pageSuggest a fix

MS 301 893

2008

Broadband radio access networks

(BRAN); 5 GHz high performance RLAN;

Harmonized

EN covering essential requirements of Article 3.2 of the R&TTE directive

Seksyen 121

Open as pageSuggest a fix

MS 302 208

Electromagnetic compatibility and radio spectrum matters (ERM); Radio frequency identification equipment operating in the band 865 MHz to 868 MHz with power levels up to 2 W; Part 1: Technical requirements and methods o...

Seksyen 122

Open as pageSuggest a fix

MS 62102

Electrical safety

-

Classification of interfaces for equipment to be connected to information and communications technology network

Seksyen 123

Open as pageSuggest a fix

MS 62367

Safety aspects for XDSL signals on circuits connected to telecommunication networks (DSL: Digital Subscriber Line)

Bahagian

Part 2-1 2008

Environmental testing - Part 2-1: Tests-Tests A: Cold

Bahagian

Part 2-11 2008

Basic environmental testing procedures -

Bahagian

Part 2: Tests - Test Ka: Salt mist

Bahagian

Part 2-13 2008

Basic environmental testing procedures -

Bahagian

Part 2: Tests - Test M: Low air pressure

Bahagian

Part 2-14 2008

Basic environmental testing procedures -

Bahagian

Part 2: Tests - Test N: Change temperature

Bahagian

Part 2-17 2008

Basic environmental testing procedures -

Bahagian

Part 2-17: Tests - Test Q: Sealing

Bahagian

Part 2-18 2008

Environmental testing - Part 2-18: Tests -

Suggest a fix

Test R and guidance: Water

Bahagian

Part 2-21 2008

Environmental testing - Part 2-21: Test-Test U: Robustness of terminations and integral mounting devices

Bahagian

Part 2-27 2008

Environmental testing - Part 2-27: Tests -

Suggest a fix

Test Ea and guidance: Shock

Bahagian

Part 2-29 2008

Basic environmental testing procedures -

Bahagian

Part 2-29: Tests - Test Eb and guidance:

Bump

Bahagian

Part 2-30 2008

Environmental testing - Part 2-30: Tests -

Suggest a fix

Test Db: Damp heat, cyclic (12 h + 12 h cycle)

Bahagian

Part 2-39 2008

Basic environmental testing procedures -

Bahagian

Part 2: Tests - Test Z/AMD: Combined sequential cold, low air pressure, and damp heat test

Bahagian

Part 2-44 2008

Environmental testing - Part 2: Tests -

Suggest a fix

Guidance on test T: Soldering

15

Bahagian

Part 2-54 2008

Environmental testing - Part 2-54: Tests -

Suggest a fix

Test Ta: Solderability testing of electronic components by the wetting balance method

Bahagian

Part 2-58 2008

Environmental testing - Part 2-58: Tests -

Suggest a fix

Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices

Bahagian

Part 2-66 2008

Environmental testing - Part 2: Test methods - Test Cx: Damp heat, steady state (unsaturated pressurized vapour)

Bahagian

Part 2-67 2008

Environmental testing - Part 2: Tests -

Suggest a fix

Test Cy: Damp heat, steady state, accelerated test primarily intended for components

Bahagian

Part 2-69 2008

Environmental testing - Part 2-69: Tests -

Suggest a fix

Test Te: Solderability testing of electronic components for surface mounting devices

(SMD) by the wetting balance method

Bahagian

Part 2-78 2008

Environmental testing - Part 2: Tests -

Suggest a fix

Test Cab: Damp heat, steady state

Bahagian

Part 3-1 2008

Basic environmental testing procedures -

Bahagian

Part 3: Background information - Section one: Cold and dry heat tests

Bahagian

Part 3-4 2008

Bahagian

Part 3-4:

Supporting documentation and guidance -

Suggest a fix

Damp heat tests

Seksyen 147

Open as pageSuggest a fix

MS IEC

60107

Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements at radio and video frequencies

Bahagian

Part 2-10 2008

Bahagian

Part 2-10:

Glowing/hot-wire based test methods -

Suggest a fix

Glow-wire apparatus and common test procedure

16

Bahagian

Part 2-8 2008

Automatic electrical controls for household and similar use - Part 2-8:

Suggest a fix

Particular requirements for electrically operated water valves, including mechanical requirements

Bahagian

Part 2-2 2008

Miscellaneous lampholders - Part 2:

Suggest a fix

Particular requirements - Connectors for led modules

Bahagian

Part 2-

2008

Suggest a fix

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2 -010: Particular requirements for laboratory equipment for the heating of materials

Seksyen 153

Open as pageSuggest a fix

MS IEC

61010

2008

Suggest a fix

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2 -020: Particular requirements for laboratory centrifuges

Seksyen 154

Open as pageSuggest a fix

MS IEC

61010

2008

Suggest a fix

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2 -032: Particular requirements for hand-held and hand-manipulated current sensors for electrical test and measurement

Seksyen 155

Open as pageSuggest a fix

MS IEC

61010

2008

Suggest a fix

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2 -051: Particular requirements for laboratory equipment for mixing and stirring

Seksyen 156

Open as pageSuggest a fix

MS IEC

61010

2008

Suggest a fix

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2 -081: Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes

Seksyen 158

Open as pageSuggest a fix

MS IEC

61540

2008

Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)

Seksyen 159

Open as pageSuggest a fix

MS IEC

61543

2008

Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility

Bahagian

Part 22 2008

Low-voltage surge protective devices -

Bahagian

Part 22:

Surge protective devices connected to telecommunications and signalling networks

Suggest a fix

-

Selection and application principles

Seksyen 161

Open as pageSuggest a fix

MS IEC

61855

2008

Household electrical hair care appliances -

Methods of measuring the performance

Seksyen 162

Open as pageSuggest a fix

MS IEC

62020

2008

Electrical accessories - Residual current monitors for household and similar uses

(RCMs)

Seksyen 163

Open as pageSuggest a fix

MS IEC

62087

2008

Methods of measurement for the power consumption of audio, video and related equipment

Bahagian

Part 209 2008

High-voltage switchgear and controlgear -

Bahagian

Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable terminations

Seksyen 165

Open as pageSuggest a fix

MS IEC

62423

2008

Type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses (Type B RCCBs and Type B

RCBOs)

Seksyen 168

Open as pageSuggest a fix

MS ISO 148

Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of charpy V reference test pieces for verification of test machines

Seksyen 169

Open as pageSuggest a fix

MS ISO 216

2008

Writing paper and certain classes of printed matter - Trimmed sizes - A and B series, and indication of machine direction

Seksyen 170

Open as pageSuggest a fix

MS ISO 1081

2008

Belt drives - V-belts and V-ribbed belts, and corresponding grooved pulleys –

Vocabulary

Seksyen 171

Open as pageSuggest a fix

MS ISO 1628

Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 3: Polyethylenes and polypropylenes

Seksyen 172

Open as pageSuggest a fix

MS ISO 1628

Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 4: Polycarbonate (PC)

Suggest a fix

moulding and extrusion materials

Seksyen 173

Open as pageSuggest a fix

MS ISO 1628

Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester

Suggest a fix

(TP)

homopolymers and copolymers

Bahagian

Part 6: Methyl methacrylate polymers

Seksyen 175

Open as pageSuggest a fix

MS ISO 1872

Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

Seksyen 178

Open as pageSuggest a fix

MS ISO 2232

2008

Round drawn wire for general purpose non-alloy steel wire ropes and for large diameter steel wire ropes – Specification

19

Seksyen 179

Open as pageSuggest a fix

MS ISO 2878

2008

Rubber

-

Antistatic and conductive products - Determination of electrical resistance

Seksyen 180

Open as pageSuggest a fix

MS ISO 3037

2008

Corrugated fibreboard - Determination of edgewise crush resistance (unwaxed edge method)

Seksyen 182

Open as pageSuggest a fix

MS ISO 3523

2008

Oil of cananga [Cananga odorata (Lam.)

Hook. f. et Thomson, forma macrophylla] -

Specification

Seksyen 183

Open as pageSuggest a fix

MS ISO 3524

2008

Oil of cinnamon leaf, Sri Lanka type

(Cinnamomum zeylanicum blume)

-

Specification

Seksyen 187

Open as pageSuggest a fix

MS ISO 3849

2008

Oil of citronella,

Sri

Lanka type

(Cymbopogon nardus (L.) W. Watson var.

lenabatu Stapf.) - Specification

Seksyen 188

Open as pageSuggest a fix

MS ISO 3994

2008

Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials – Specification

Seksyen 189

Open as pageSuggest a fix

MS ISO 4080

2008

Rubber and plastics hoses and hose assemblies

-

Determination of permeability to gas

Seksyen 190

Open as pageSuggest a fix

MS ISO 4081

2008

Rubber hoses and tubing for cooling systems for internal-combustion engines -

Specification

Seksyen 195

Open as pageSuggest a fix

MS ISO 4587

2008

Adhesives - Determination of tensile lap shear strength of rigid-to-rigid bonded assemblies

Seksyen 198

Open as pageSuggest a fix

MS ISO 4928

2008

Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a nonpetroleum base hydraulic brake fluid (service temperature 120 °C max.)

Seksyen 199

Open as pageSuggest a fix

MS ISO 4930

2008

Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid

(service temperature 150 °C max.)

Bahagian

Part 1: Schopper-Riegler method

Seksyen 207

Open as pageSuggest a fix

MS ISO 5367

2008

Breathing tubes intended for use with anaesthetic apparatus and ventilators

21

Seksyen 208

Open as pageSuggest a fix

MS ISO 5564

2008

Black pepper and white pepper, whole or ground

-

Determination of piperine content - Spectrophotometric method

Seksyen 209

Open as pageSuggest a fix

MS ISO 6118

2008

Road vehicles - Elastomeric cups and seals for cylinders for hydraulic braking systems using a nonpetroleum base hydraulic brake fluid (service temperature 70 °C max.)

Seksyen 210

Open as pageSuggest a fix

MS ISO 6119

2008

Road vehicles - Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid

(service temperature 120 °C max.)

Seksyen 212

Open as pageSuggest a fix

MS ISO 6780

2008

Flat pallets for intercontinental materials handling - Principal dimensions and tolerances

Bahagian

Part 6:

Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to

Suggest a fix

C8 hydrocarbons using three capillary columns

Seksyen 217

Open as pageSuggest a fix

MS ISO 7233

2008

Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum

Seksyen 222

Open as pageSuggest a fix

MS ISO 7998

2008

Ophthalmic optics - Spectacle frames -

Lists of equivalent terms and vocabulary

Seksyen 223

Open as pageSuggest a fix

MS ISO 8029

2008

Plastics hose - General-purpose collapsible water hose, textile-reinforced

-

Specification

Seksyen 226

Open as pageSuggest a fix

MS ISO 8036

2008

Optics and photonics - Microscopes -

Immersion liquids for light microscopy

Seksyen 227

Open as pageSuggest a fix

MS ISO 8308

2008

Rubber and plastics hoses and tubing -

Determination of transmission of liquids through hose and tubing walls

Seksyen 238

Open as pageSuggest a fix

MS ISO 9169

2008

Air quality - Definition and determination of performance characteristics of an automatic measuring system

Seksyen 241

Open as pageSuggest a fix

MS ISO 9334

2008

Optics and photonics-Optical transfer function - Definitions and mathematical relationships

Bahagian

Part 2: Test lenses for focimeters used for measuring contact lenses

Bahagian

Part 1: HMEs for use with minimum tidal volumes of 250 ml

Seksyen 244

Open as pageSuggest a fix

MS ISO 9360

Anaesthetic and respiratory equipment -

Suggest a fix

Heat and moisture exchangers (HMEs) for

Humidifying respired gases in humans:

HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml

Suggest a fix

24

Seksyen 245

Open as pageSuggest a fix

MS ISO

10002

2008

Quality management

-

Customer satisfaction - Guidelines for complaints handling in organizations

Seksyen 249

Open as pageSuggest a fix

MS ISO

10083

2008

Oxygen concentrator supply systems for use with medical gas pipeline systems

Seksyen 250

Open as pageSuggest a fix

MS ISO

10109

Optics and photonics - Environmental requirements - Part 1: General overview, terms and definitions, climatic zones and their parameters

Seksyen 251

Open as pageSuggest a fix

MS ISO

10364

2008

Structural adhesives - Determination of the pot life (working life) of multi-component adhesives

Seksyen 260

Open as pageSuggest a fix

MS ISO

11027

2008

Pepper and pepper oleoresins

-

Determination of piperine content -

Method using high-performance liquid chromatography

Seksyen 261

Open as pageSuggest a fix

MS ISO

11079

2008

Ergonomics of the thermal environment -

Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects

Bahagian

Part 3: Determination of moisture content using the oven drying method

Bahagian

Part 5: Determination of characteristics of concentric rotation

Bahagian

Part 6: Determination of bending strength by the three-point method

Bahagian

Part 7: Determination of flexural modulus by the three-point method

Bahagian

Part 8: Determination of natural frequency and flexural modulus by experimental modal analysis

Seksyen 273

Open as pageSuggest a fix

MS ISO

11758

2008

Rubber and plastics hoses - Exposure to a xenon arc lamp - Determination of changes in colour and appearance

Seksyen 276

Open as pageSuggest a fix

MS ISO

11859

2008

Textile floor coverings - Pure wool, hand-knotted pile carpets - Specification

Bahagian

Part 1: Vocabulary

Bahagian

Part 2: Testing of airbag modules

Bahagian

Part 3: Testing of inflator assemblies

Bahagian

Part 2: Guidelines for the use of impact severity measures

Seksyen 284

Open as pageSuggest a fix

MS ISO

12951

2008

Textile floor coverings - Determination of mass loss using the Lisson test

Seksyen 287

Open as pageSuggest a fix

MS ISO

13747

2008

Textile floor coverings - Determination of size, squareness and straightness of edge of tiles

Seksyen 288

Open as pageSuggest a fix

MS ISO

13750

2008

Textile floor coverings - Determination of resistance to staining by acid food colours

Seksyen 290

Open as pageSuggest a fix

MS ISO

13829

2008

Water quality - Determination of the genotoxicity of water and waste water using the umu-test

Seksyen 291

Open as pageSuggest a fix

MS ISO

13856

Safety of machinery - Pressure-sensitive protective devices - Part 3: General principle for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices

Seksyen 292

Open as pageSuggest a fix

MS ISO

14044

2008

Environmental management - Life cycle assessment - Requirements and guidelines

Seksyen 293

Open as pageSuggest a fix

MS ISO

14171

2008

Welding consumables - Wire electrodes and wire-flux combinations for submerged arc welding of non alloy and fine grain steels - Classifications

Seksyen 294

Open as pageSuggest a fix

MS ISO

14408

2008

Tracheal tubes designed for laser surgery -

Requirements for marking and accompanying information

Seksyen 295

Open as pageSuggest a fix

MS ISO

14505

Ergonomics of the thermal environment -

Suggest a fix

Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature

Seksyen 296

Open as pageSuggest a fix

MS ISO

14505

Ergonomics of the thermal environment -

Suggest a fix

Evaluation of thermal environments in vehicles - Part 3: Evaluation of thermal comfort using human subjects

Seksyen 297

Open as pageSuggest a fix

MS ISO

14791

2008

Road vehicles - Heavy commercial vehicle combinations and articulated buses -

Lateral stability test methods

28

Seksyen 298

Open as pageSuggest a fix

MS ISO

14792

2008

Road vehicles - Heavy commercial vehicles and buses - Steady-state circular tests

Seksyen 299

Open as pageSuggest a fix

MS ISO

14793

2008

Road vehicles - Heavy commercial vehicles and buses - Lateral transient response test methods

Seksyen 300

Open as pageSuggest a fix

MS ISO

14794

2008

Heavy commercial vehicles and buses -

Braking in a turn - Open-loop test methods

Seksyen 301

Open as pageSuggest a fix

MS ISO

14851

2008

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer

Seksyen 302

Open as pageSuggest a fix

MS ISO

14852

2008

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium - Method by analysis of evolved carbon dioxide

Seksyen 303

Open as pageSuggest a fix

MS ISO

14855

Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions

Suggest a fix

-

Method by analysis of evolved carbon dioxide - Part 1: General method

Seksyen 304

Open as pageSuggest a fix

MS ISO

15002

2008

Flow-metering devices for connection to terminal units of medical gas pipeline systems

Seksyen 307

Open as pageSuggest a fix

MS ISO

15072

2008

Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A

Seksyen 309

Open as pageSuggest a fix

MS ISO

15193

2008

In vitro diagnostic medical devices -

Measurement of quantities in samples of biological origin

-

Presentation of reference measurement procedures

29

Seksyen 310

Open as pageSuggest a fix

MS ISO

15194

2008

In vitro diagnostic medical devices -

Measurement of quantities in samples of biological origin - Description of reference materials

Seksyen 312

Open as pageSuggest a fix

MS ISO

15197

2008

In vitro diagnostic test systems

-

Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus

Seksyen 313

Open as pageSuggest a fix

MS ISO

15198

2008

Clinical laboratory medicine - In vitro diagnostic medical devices - Validation of user quality control procedures by the manufacturer

Seksyen 314

Open as pageSuggest a fix

MS ISO

15265

2008

Ergonomics of the thermal environment -

Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions

Seksyen 321

Open as pageSuggest a fix

MS ISO

16000

Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on

Suggest a fix

Tenax TA® sorbent, thermal desorption and gas chromatography using MS/FID

30

Seksyen 323

Open as pageSuggest a fix

MS ISO

16000

Indoor Air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing -

Suggest a fix

Emission test chamber method

Seksyen 324

Open as pageSuggest a fix

MS ISO

16000

Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing -

Suggest a fix

Emission test cell method

Bahagian

Part 11 2008

Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing -

Suggest a fix

Sampling, storage of samples and preparation of test specimens

Seksyen 326

Open as pageSuggest a fix

MS ISO

16017

Indoor, ambient and workplace air -

Suggest a fix

Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography

- Part 1: Pumped sampling

Seksyen 327

Open as pageSuggest a fix

MS ISO

16017

Indoor, ambient and workplace air -

Suggest a fix

Sampling and analysis of volatile organic compounds by sorbent tube/ thermal desorption/ capillary gas chromatography

- Part 2: Diffusive sampling

Seksyen 329

Open as pageSuggest a fix

MS ISO

16333

2008

Heavy commercial vehicles and buses -

Steady-state rollover threshold - Tilt-table test method

Seksyen 330

Open as pageSuggest a fix

MS ISO

17087

2008

Specifications for adhesives used for finger joints in non-structural lumber products

Seksyen 332

Open as pageSuggest a fix

MS ISO

17504

2008

Textile floor coverings - Determination of wool fibre integrity using an abrasion machine

Seksyen 333

Open as pageSuggest a fix

MS ISO

17511

2008

In vitro diagnostic medical devices -

Measurement of quantities in biological samples - Metrological traceability of values assigned to calibrators and control materials

Seksyen 334

Open as pageSuggest a fix

MS ISO

17561

2008

Fine ceramics

(advanced ceramics, advanced technical ceramics) - Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance

Seksyen 335

Open as pageSuggest a fix

MS ISO

17565

2008

Fine ceramics

(advanced ceramics, advanced technical ceramics) - Test

Method for flexural strength of monolithic ceramics at elevated temperature

Seksyen 336

Open as pageSuggest a fix

MS ISO

17812

2008

Paper, board and pulps - Determination of total magnesium, total calcium, total manganese, total iron and total copper

Seksyen 337

Open as pageSuggest a fix

MS ISO

18153

2008

In vitro diagnostic medical devices -

Measurement of quantities in biological samples - Metrological traceability of values for catalytic concentration of enzymes assigned to calibrators and control materials

Seksyen 339

Open as pageSuggest a fix

MS ISO

18756

2008

Fine ceramics

(advanced ceramics, advanced technical ceramics)

-

Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF)

method

Seksyen 340

Open as pageSuggest a fix

MS ISO

18757

2008

Fine ceramics

(advanced ceramics, advanced technical ceramics)

-

Determination of specific surface area of ceramic powders by gas adsorption using the BET method

32

Seksyen 341

Open as pageSuggest a fix

MS ISO

18777

2008

Transportable liquid oxygen systems for medical use - Particular requirements

Seksyen 343

Open as pageSuggest a fix

MS ISO

18779

2008

Medical devices for conserving oxygen and oxygen mixtures - Particular requirements

Seksyen 345

Open as pageSuggest a fix

MS ISO

19001

2008

In vitro diagnostic medical devices -

Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology

Seksyen 348

Open as pageSuggest a fix

MS ISO

19134

2008

Geographic information - Location-based services

-

Multimodal routing and navigation

Seksyen 353

Open as pageSuggest a fix

MS ISO

20685

2008 3-D scanning methodologies for internationally compatible anthropometric databases

Seksyen 355

Open as pageSuggest a fix

MS ISO

21647

2008

Medical electrical equipment - Particular requirements for the basic safety and essential performance of respiratory gas monitors

Seksyen 357

Open as pageSuggest a fix

MS ISO

22197

Fine ceramics

Suggest a fix

(advanced ceramics, advanced technical ceramics) - Test method for air-purification performance of semiconducting photocatalytic materials - Part 1: Removal of nitric oxide

Seksyen 360

Open as pageSuggest a fix

MS ISO

23145

Fine ceramics

Suggest a fix

(advanced ceramics, advanced technical ceramics)

-

Determination of bulk density of ceramic powders - Part 1: Tap density

Seksyen 364

Open as pageSuggest a fix

MS ISO

24235

2008

Fine ceramics

(advanced ceramics, advanced technical ceramics)

-

Determination of particle size distribution of ceramic powders by laser diffraction method

Seksyen 365

Open as pageSuggest a fix

MS ISO

24341

2008

Resilient and textile floor coverings -

Determination of length, width and straightness of sheet

34

Bahagian

Part 1: Level 1 - Supervised diver

Bahagian

Part 2: Level 2 - Autonomous diver

Bahagian

Part 3: Level 3 - Dive leader

Seksyen 371

Open as pageSuggest a fix

MS ISO

24803

2008

Recreational diving services

-

Requirements for recreational scuba diving service providers

Seksyen 373

Open as pageSuggest a fix

MS ISO

GUIDE 35

2008

Reference materials

-

General and statistical principles for certification

Seksyen 379

Open as pageSuggest a fix

MS ISO/IEC

18028

Information technology

Suggest a fix

-

Security techniques - IT network security - Part 3:

Securing communications between networks using security gateways

Seksyen 381

Open as pageSuggest a fix

MS ISO/IEC

18028

Information technology

Suggest a fix

-

Security techniques - IT network security - Part 5:

Securing communications across networks using virtual private networks

Bahagian

Part 1: BioAPI specification

Bahagian

Part 1: Data element specification

Bahagian

Part 2: Procedures for the operation of the biometric registration authority

Bahagian

Part 3: Patron format specifications

Bahagian

Part 7:

Signature/sign time series data

Bahagian

Part 1: Principles and framework

Seksyen 395

Open as pageSuggest a fix

MS ISO/IEC

24709

Information technology - Conformance testing for the biometric application programming interface (BioAPI) Part 1:

Suggest a fix

Methods and procedures

Seksyen 396

Open as pageSuggest a fix

MS ISO/IEC

24709

Information technology - Conformance testing for the biometric application programming interface (BioAPI) - Part 2:

Suggest a fix

Test assertions for biometric service providers

Seksyen 397

Open as pageSuggest a fix

MS ISO/IEC

24713

Information technology

Suggest a fix

-

Biometric profiles for interoperability and data interchange - Part 1: Overview of biometric systems and biometric profiles

Seksyen 398

Open as pageSuggest a fix

MS ISO/IEC

27005

2008

Information technology

-

Security techniques - Information security risk management

37

Seksyen 399

Open as pageSuggest a fix

MS ISO/TS

18835

2008

Inhalational anaesthesia systems - Draw-over vaporizers and associated equipment

Seksyen 400

Open as pageSuggest a fix

MS ISO/TS

19134

2008

Geographic information - Location - Based services

-

Multimodal routing and navigation

Seksyen 402

Open as pageSuggest a fix

MS ISO/TS

19139

2008

Geographic information – Metadata - XML schema implementation

Bertarikh 27 Jun 2012

Dated 27 June 2012

[JSM/SD-600/12/13 Jld. 5; PN(PU2)559/V]

DATUK SERI PANGLIMA DR. MAXIMUS JOHNITY ONGKILI

Menteri Sains, Teknologi dan Inovasi/

Minister of Science, Technology and Innovations

Common questions

What is Perisytiharan Penentuan Standard?
Perisytiharan Penentuan Standard is Malaysia P.U. (B), cited as P.U. (B) 246 2012, currently marked in force and first recorded in 2012.
Is Perisytiharan Penentuan Standard still in force?
Yes — Perisytiharan Penentuan Standard is currently in force.
When did Perisytiharan Penentuan Standard take effect?
Perisytiharan Penentuan Standard was first recorded in 2012.
How many sections does Perisytiharan Penentuan Standard have?
Perisytiharan Penentuan Standard contains 402 sections.
Where can I read the official version of Perisytiharan Penentuan Standard?
The official text of Perisytiharan Penentuan Standard is published at lom.agc.gov.my.

Something wrong on this page?

If one provision's text doesn't match the official source, use Suggest a fix beside that provision — it opens an editor next to the source document. For anything else — a missing amendment, a broken link, out-of-date content, or a removal request — report it here.

Report an issueRequest removal