Skip to content
P.U. (A)In force

Kaedah-Kaedah Kenderaan Motor (Pembinaan dan Penggunaan)(Pindaan) 2011

The full official text, structured for quick navigation. Copy any provision or jump straight to a section.

Enacted
2011
Sections
79

Kaedah-Kaedah Kenderaan Motor (Pembinaan dan Penggunaan)(Pindaan) 2011 is Malaysia P.U. (A), cited as P.U. (A) 409 2011, currently marked in force and first recorded in 2011.

Front matterCover and publication detailsOpen

WARTA KERAJAAN PERSEKUTUAN

FEDERALGOVERNMENT

GAZETTE

KAEDAH-KAEDAH KENDERAAN MOTOR (PEMBINAAN

DAN PENGGUNAAN)(PINDAAN) 2011

MOTOR VEHICLES (CONSTRUCTION AND USE)

(AMENDMENT) RULES 2011

DISIARKAN OLEH/

JABATAN PEGUAM NEGARA/

ATTORNEY GENERAL’S CHAMBERS

2

AKTA PENGANGKUTAN JALAN 1987

KAEDAH-KAEDAH KENDERAAN MOTOR (PEMBINAAN DAN PENGGUNAAN)

(PINDAAN) 2011

Opening note

Preamble

  1. PADA menjalankan kuasa yang diberikan oleh seksyen 66 Akta Pengangkutan Jalan 1987 [Akta 333], Menteri membuat kaedah-kaedah yang berikut: Nama dan permulaan kuatkuasa

Kaedah-Kaedah Kenderaan Motor (Pembinaan dan Penggunaan) 1959

[L.N. 170/1959], yang disebut “Kaedah-Kaedah ibu” dalam Kaedah-Kaedah ini, dipinda dengan memasukkan selepas kaedah 9 kaedah yang berikut:

“Approval for construction of motor vehicle

(1)

A motor vehicle shall not be constructed unless—

(a)

prior approval has been obtained from the

Director General of its particular, type, design and suitability to be used as a vehicle;

(b)

the body of the motor vehicle is made in accordance with the plan and elevation general arrangement drawings which have been approved by the Director General;

(c)

conform to the specifications as specified in the Third Schedule; or

3

Requirements for electric motor vehicle

(d)

in accordance with any other requirement as the Director General may determine, as the case may be.

(2)

A motor vehicle referred to in subrule (1) shall include an electric motor vehicle.

An electric motor vehicle shall—

(a)

bear a clear, distinct and untampered motor serial number and chassis number;

(c)

have a climbing capability exceeding 20 percent gradient;

(d)

use a battery, including its installation, that is certified by a competent body recognized by the Director

General;

(e)

use an electrical wiring system from an electrical resistant material and certified by a competent body recognized by the Director General; and

(f)

in respect of an electric motorcycle, conform to the specifications of MS 2413 Specification for Electric

Motorcycles.”.

4

Kaedah-Kaedah ibu dipinda dengan memasukkan selepas Jadual Kedua jadual yang berikut:

“THIRD SCHEDULE

(Rule 9A)

SPECIFICATIONS FOR CONSTRUCTION OF MOTOR VEHICLES

The construction of a motor vehicle shall conform to the following specifications, as the case requires:

Seksyen 1

UN ECE Regulation 3 Uniform Provisions Concerning the Approval of Retro-Reflecting Devices for Power-Driven Vehicles and Their Trailers;

Seksyen 2

UN ECE Regulation 6 Uniform Provisions Concerning the Approval of Direction

Indicators for Motor Vehicles and Their Trailers;

Seksyen 3

UN ECE Regulation 7 Uniform Provisions Concerning the Approval of Front and

Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for

Motor Vehicles (Except Motorcycles) and Their Trailers;

UN ECE Regulation 13 Uniform Provisions Concerning the Approval of Vehicles of Categories M, N and O With Regard to Braking;

UN ECE Regulation 13-H Uniform Provisions Concerning the Approval of

Vehicles of Categories M, N and O With Regard to Braking;

UN ECE Regulation 14 Uniform Provisions Concerning the Approval of Vehicles

With Regard to Safety-Belt Anchorages, Isofix Anchorages Systems and Isofix

Top Tether Anchorages;

UN ECE Regulation 17 Uniform Provisions Concerning the Approval of Vehicles

With Regard to the Seats, Their Anchorages and any Head Restraints;

5

UN ECE Regulation 25 Uniform Provisions Concerning the Approval of Head

Restraints (Headrests), Whether or Not Incorporated in Vehicle Seats;

UN ECE Regulation 28 Uniform Provisions Concerning the Approval of Audible

Warning Devices and of Motor Vehicles With Regard to Their Audible Signals;

UN ECE Regulation 39 Uniform Provisions Concerning the Approval of Vehicles

With Regard to the Speedometer Equipment Including its Installation;

UN ECE Regulation 40 Uniform Provisions Concerning the Approval of

Motorcycles Equipped With a Positive-Ignition Engine With Regard to the

Emission of Gaseous Pollutants by the Engine;

UN ECE Regulation 41 Uniform Provisions Concerning the Approval of

Motorcycles With Regard to Noise;

UN ECE Regulation 43 Uniform Provisions Concerning the Approval of Safety

Glazing Materials and Their Installation on Vehicles;

UN ECE Regulation 46 Uniform Provisions Concerning the Approval of Devices for Indirect Vision and of Motor Vehicles With Regard to the Installation of These

Devices;

UN ECE Regulation 48 Uniform Provisions Concerning the Approval of Vehicles

With Regard to the Installation of Lighting-Signalling Devices;

UN ECE Regulation 50 Uniform Provisions Concerning the Approval of Front

Position Lamps, Rear Position Lamps, Stop Lamps, Direction Indicators and Rear-Registration-Plate Illuminating Devices for Mopeds, Motorcycles and Vehicles

Treated as Such;

UN ECE Regulation 51 Uniform Provisions Concerning the Approval of Motor

Vehicles Having At Least Four Wheels With Regard to Their Noise Emissions;

6

UN ECE Regulation 53 Uniform Provisions Concerning the Approval of Category

L3 Vehicles With Regard to the Installation of Lighting and Light-Signalling

Devices;

UN ECE Regulation 58 Uniform Provisions Concerning the Approval of:

(b)

Vehicles With Regard to the Installation of an RUPD of an Approved Type;

(c)

Vehicles With Regard to Their Rear Underrun Protection (RUP);

UN ECE Regulation 69 Uniform Provisions Concerning the Approval of Rear

Marking Plates for Slow Moving Vehicles (By Construction) and Their Trailers;

UN ECE Regulation 70 Uniform Provisions Concerning the Approval of Rear

Marking Plates for Heavy and Long Vehicles;

UN ECE Regulation 73 Uniform Provisions Concerning the Approval of Goods

Vehicles Trailers, Trailers and Semi-Trailers With Regard to Their Lateral

Protection;

UN ECE Regulation 75 Uniform Provisions Concerning the Approval of

Pneumatic Tyres for Motorcycles and Mopeds;

UN ECE Regulation 78 Uniform Provisions Concerning the Approval of Vehicles of Category L With Regard to Braking;

UN ECE Regulation 79 Uniform Provisions Concerning the Approval of Vehicles

With Regard to Steering Equipment;

UN ECE Regulation 81 Uniform Provisions Concerning the Approval of Rear View

Mirrors of Two-Wheeled Power-Driven Vehicles With or Without Side Car, With

Regard to the Mounting of Rear-View Mirrors on Handlebars;

7

UN ECE Regulation 83 Uniform Provisions Concerning the Approval of Vehicles

With Regard to the Emission of Pollutants According to Engine Fuel

Requirements;

UN ECE Regulation 90 Uniform Provisions Concerning the Approval of

Replacement Brake Lining Assemblies and Drum Brake Linings for Power-Driven

Vehicles and Their Trailers;

UN ECE Regulation 93 Uniform Provisions Concerning the Approval of:

(b)

Vehicles With Regard to the Installation of an FUPD of an Approved Type;

(c)

Vehicles With Regard to Their Front Underrun Protection (FUP);

UN ECE Regulation 94 Uniform Provisions Concerning the Approval of Vehicles

With Regard to the Protection of the Occupants in the Event of a Frontal

Collision;

UN ECE Regulation 95 Uniform Provisions Concerning the Approval of Vehicles

With Regard to the Protection of the Occupants in the Event of a Lateral

Collision;

UN ECE Regulation 100 Uniform Provisions Concerning the Approval of Battery

Electric Vehicles With Regard to Specific Requirements for the Instruction,

Functional Safety and Hydrogen Emission;

UN ECE Regulation 104 Uniform Provisions Concerning the Approval of Retro-Reflective Markings for Heavy and Long Vehicles and Their Trailers;

UN ECE Regulation 112 Uniform Provisions Concerning the Approval of Motor

Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped With Filament Lamps; and

8

UN ECE Regulation 113 Uniform Provisions Concerning the Approval of Motor

Vehicle Headlamps Emitting a Symmetrical Passing Beam or a Driving Beam or

Both and Equipped With Filament Lamps.”.

Dibuat 9 Disember 2011

[KP/PUU/0.440/W/BD/9; PN(PU2)460/LXIV]

DATO’ SERI KONG CHO HA

Menteri Pengangkutan

9

ROAD TRANSPORT ACT 1987

MOTOR VEHICLES (CONSTRUCTION AND USE)(AMENDMENT) RULES 2011

Opening note

Preamble

  1. IN exercise of the powers conferred by section 66 of the Road Transport Act 1987 [Act 333], the Minister makes the following rules: Citation and commencement 1.

(1)

These rules may be cited as the Motor Vehicles (Construction and Use)

(Amendment) Rules 2011.

(2)

These Rules come into operation on 1 January 2012.

New rules 9A and 9B

Seksyen 2

The Motor Vehicles (Construction and Use) Rules 1959 [L.N. 170/1959], which are referred to as the “principal Rules” in these Rules, are amended by inserting after rule 9 the following rules:

“Approval for construction of motor vehicle

Seksyen 9A

(1)

A motor vehicle shall not be constructed unless—

(a)

prior approval has been obtained from the

Director General of its particular, type, design and suitability to be used as a vehicle;

(b)

the body of the motor vehicle is made in accordance with the plan and elevation general arrangement drawings which have been approved by the Director General;

(c)

conform to the specifications as specified in the

Third Schedule; or

(d)

in accordance with any other requirement as the

10

Requirements for electric motor vehicle

Director General may determine, as the case may be.

(2)

A motor vehicle referred to in subrule (1) shall include an electric motor vehicle.

Seksyen 9B

An electric motor vehicle shall—

(a)

bear a clear, distinct and untampered motor serial number and chassis number;

(c)

have a climbing capability exceeding 20 percent gradient;

(d)

use a battery, including its installation, that is certified by a competent body recognized by the Director

General;

(e)

use an electrical wiring system from an electrical resistant material and certified by a competent body recognized by the Director General; and

(f)

in respect of an electric motorcycle, conform to the specifications of MS 2413 Specification for Electric

Motorcycles.”.

11

Seksyen 3

The principal Rules are amended by inserting after the Second Schedule the following schedule:

“THIRD SCHEDULE

(Rule 9A)

SPECIFICATIONS FOR CONSTRUCTION OF MOTOR VEHICLES

The construction of a motor vehicle shall conform to the following specifications, as the case requires:

Seksyen 1

UN ECE Regulation 3 Uniform Provisions Concerning the Approval of Retro-Reflecting Devices for Power-Driven Vehicles and Their Trailers;

Seksyen 2

UN ECE Regulation 6 Uniform Provisions Concerning the Approval of Direction

Indicators for Motor Vehicles and Their Trailers;

Seksyen 3

UN ECE Regulation 7 Uniform Provisions Concerning the Approval of Front and

Rear Position (Side) Lamps, Stop-Lamps and End-Outline Marker Lamps for

Motor Vehicles (Except Motorcycles) and Their Trailers;

Seksyen 4

UN ECE Regulation 13 Uniform Provisions Concerning the Approval of Vehicles of Categories M, N and O With Regard to Braking;

Seksyen 5

UN ECE Regulation 13-H Uniform Provisions Concerning the Approval of

Vehicles of Categories M, N and O With Regard to Braking;

Seksyen 6

UN ECE Regulation 14 Uniform Provisions Concerning the Approval of Vehicles

With Regard to Safety-Belt Anchorages, Isofix Anchorages Systems and Isofix

Top Tether Anchorages;

12

Seksyen 7

UN ECE Regulation 17 Uniform Provisions Concerning the Approval of Vehicles

With Regard to the Seats, Their Anchorages and any Head Restraints;

Seksyen 8

UN ECE Regulation 25 Uniform Provisions Concerning the Approval of Head

Restraints (Headrests), Whether or Not Incorporated in Vehicle Seats;

Seksyen 9

UN ECE Regulation 28 Uniform Provisions Concerning the Approval of Audible

Warning Devices and of Motor Vehicles With Regard to Their Audible Signals;

Seksyen 10

UN ECE Regulation 39 Uniform Provisions Concerning the Approval of Vehicles

With Regard to the Speedometer Equipment Including its Installation;

Seksyen 11

UN ECE Regulation 40 Uniform Provisions Concerning the Approval of

Motorcycles Equipped With a Positive-Ignition Engine With Regard to the

Emission of Gaseous Pollutants by the Engine;

Seksyen 12

UN ECE Regulation 41 Uniform Provisions Concerning the Approval of

Motorcycles With Regard to Noise;

Seksyen 13

UN ECE Regulation 43 Uniform Provisions Concerning the Approval of Safety

Glazing Materials and Their Installation on Vehicles;

Seksyen 14

UN ECE Regulation 46 Uniform Provisions Concerning the Approval of Devices for Indirect Vision and of Motor Vehicles With Regard to the Installation of These

Devices;

Seksyen 15

UN ECE Regulation 48 Uniform Provisions Concerning the Approval of Vehicles

With Regard to the Installation of Lighting-Signalling Devices;

Seksyen 16

UN ECE Regulation 50 Uniform Provisions Concerning the Approval of Front

Position Lamps, Rear Position Lamps, Stop Lamps, Direction Indicators and

Rear-Registration-Plate Illuminating Devices for Mopeds, Motorcycles and

Vehicles Treated as Such;

13

Seksyen 17

UN ECE Regulation 51 Uniform Provisions Concerning the Approval of Motor

Vehicles Having At Least Four Wheels With Regard to Their Noise Emissions;

Seksyen 18

UN ECE Regulation 53 Uniform Provisions Concerning the Approval of Category

L3 Vehicles With Regard to the Installation of Lighting and Light-Signalling

Devices;

Seksyen 19

UN ECE Regulation 58 Uniform Provisions Concerning the Approval of:

(b)

Vehicles With Regard to the Installation of an RUPD of an Approved Type;

(c)

Vehicles With Regard to Their Rear Underrun Protection (RUP);

Seksyen 20

UN ECE Regulation 69 Uniform Provisions Concerning the Approval of Rear

Marking Plates for Slow Moving Vehicles (By Construction) and Their Trailers;

Seksyen 21

UN ECE Regulation 70 Uniform Provisions Concerning the Approval of Rear

Marking Plates for Heavy and Long Vehicles;

Seksyen 22

UN ECE Regulation 73 Uniform Provisions Concerning the Approval of Goods

Vehicles Trailers, Trailers and Semi-Trailers With Regard to Their Lateral

Protection;

Seksyen 23

UN ECE Regulation 75 Uniform Provisions Concerning the Approval of

Pneumatic Tyres for Motorcycles and Mopeds;

Seksyen 24

UN ECE Regulation 78 Uniform Provisions Concerning the Approval of Vehicles of Category L With Regard to Braking;

Seksyen 25

UN ECE Regulation 79 Uniform Provisions Concerning the Approval of Vehicles

With Regard to Steering Equipment;

14

Seksyen 26

UN ECE Regulation 81 Uniform Provisions Concerning the Approval of Rear View

Mirrors of Two-Wheeled Power-Driven Vehicles With or Without Side Car, With

Regard to the Mounting of Rear-View Mirrors on Handlebars;

Seksyen 27

UN ECE Regulation 83 Uniform Provisions Concerning the Approval of Vehicles

With Regard to the Emission of Pollutants According to Engine Fuel

Requirements;

Seksyen 28

UN ECE Regulation 90 Uniform Provisions Concerning the Approval of

Replacement Brake Lining Assemblies and Drum Brake Linings for Power-Driven

Vehicles and Their Trailers;

Seksyen 29

UN ECE Regulation 93 Uniform Provisions Concerning the Approval of:

(b)

Vehicles With Regard to the Installation of an FUPD of an Approved Type;

(c)

Vehicles With Regard to Their Front Underrun Protection (FUP);

Seksyen 30

UN ECE Regulation 94 Uniform Provisions Concerning the Approval of Vehicles

With Regard to the Protection of the Occupants in the Event of a Frontal

Collision;

Seksyen 31

UN ECE Regulation 95 Uniform Provisions Concerning the Approval of Vehicles

With Regard to the Protection of the Occupants in the Event of a Lateral

Collision;

Seksyen 32

UN ECE Regulation 100 Uniform Provisions Concerning the Approval of Battery

Electric Vehicles With Regard to Specific Requirements for the Instruction,

Functional Safety and Hydrogen Emission;

Seksyen 33

UN ECE Regulation 104 Uniform Provisions Concerning the Approval of Retro-Reflective Markings for Heavy and Long Vehicles and Their Trailers;

15

Seksyen 34

UN ECE Regulation 112 Uniform Provisions Concerning the Approval of Motor

Vehicle Headlamps Emitting an Asymmetrical Passing Beam or a Driving Beam or Both and Equipped With Filament Lamps; and

Seksyen 35

UN ECE Regulation 113 Uniform Provisions Concerning the Approval of Motor

Vehicle Headlamps Emitting a Symmetrical Passing Beam or a Driving Beam or

Both and Equipped With Filament Lamps.”.

Made 9 December 2011

[KP/PUU/0.440/W/BD/9; PN(PU2)460/LXIV]

DATO’ SERI KONG CHO HA

Minister of Transport

Common questions

What is Kaedah-Kaedah Kenderaan Motor (Pembinaan dan Penggunaan)(Pindaan) 2011?
Kaedah-Kaedah Kenderaan Motor (Pembinaan dan Penggunaan)(Pindaan) 2011 is Malaysia P.U. (A), cited as P.U. (A) 409 2011, currently marked in force and first recorded in 2011.
Is Kaedah-Kaedah Kenderaan Motor (Pembinaan dan Penggunaan)(Pindaan) 2011 still in force?
Yes — Kaedah-Kaedah Kenderaan Motor (Pembinaan dan Penggunaan)(Pindaan) 2011 is currently in force.
When did Kaedah-Kaedah Kenderaan Motor (Pembinaan dan Penggunaan)(Pindaan) 2011 take effect?
Kaedah-Kaedah Kenderaan Motor (Pembinaan dan Penggunaan)(Pindaan) 2011 was first recorded in 2011.
How many sections does Kaedah-Kaedah Kenderaan Motor (Pembinaan dan Penggunaan)(Pindaan) 2011 have?
Kaedah-Kaedah Kenderaan Motor (Pembinaan dan Penggunaan)(Pindaan) 2011 contains 79 sections.
Where can I read the official version of Kaedah-Kaedah Kenderaan Motor (Pembinaan dan Penggunaan)(Pindaan) 2011?
The official text of Kaedah-Kaedah Kenderaan Motor (Pembinaan dan Penggunaan)(Pindaan) 2011 is published at lom.agc.gov.my.

Something wrong on this page?

If one provision's text doesn't match the official source, use Suggest a fix beside that provision — it opens an editor next to the source document. For anything else — a missing amendment, a broken link, out-of-date content, or a removal request — report it here.