Malaysia legislation
Section 121A
of KAEDAH-KAEDAH KENDERAAN MOTOR (PEMBINAAN DAN PENGGUNAAN) (PINDAAN) 2024
Seksyen 121A
(2)
All goods carried on a motorcycle shall be carried inside a container, carrier or pannier and should be placed such that the weight is evenly distributed and prevented from shifting as far as possible.
(3)
Any motorcycle fitted with container, carrier or pannier shall comply with the following requirements:
(a)
every container, carrier or pannier shall be securely fitted or mounted onto a motorcycle without sharp protrusions and fitted or mounted in
P.U. (A) 88 22
such manner that it does not cause imbalance or adversely affect the control of the vehicle on the road;
(b)
every container, carrier or pannier shall be positioned symmetrically along the longitudinal axis of the motorcycle as near to the centre of the motorcycle as possible;
(c)
its rear overhang does not exceed 40 per cent of the length between the front and rear wheel centres;
(d)
any installation of a container, carrier or pannier on the seat of the rider shall not exceed a height of 650
milimetres measured from the level of the seat of the rider and the size shall not exceed 650 milimetres in height, 600 milimetres in width and 650 milimetres in length; and
(e)
any installation of a container, carrier or pannier on either side of a motorcycle shall not exceed the height of the seat of the rider and the extreme outer portion of the motorcycle.”.
P.U. (A) 88 23
Pindaan kaedah 138 24.
Kaedah-Kaedah ibu dipinda dalam kaedah 138—
(a)
dalam subkaedah (1), dengan menggantikan perkataan “Director General”
dengan perkataan “Minister”; dan
(b)
dengan memasukkan selepas subkaedah (2) subkaedah yang berikut:
“(3)
Any person who contravenes subrule (1) commits an offence and shall, on conviction, be liable to a fine of not less than two thousand ringgit and not more than twenty thousand ringgit or to imprisonment for a term not exceeding six months or to both, and, for the second or subsequent offence, be liable to a fine of not less than ten thousand ringgit and not more than fifty thousand ringgit or to imprisonment for a term not exceeding twelve months or to both.”.
Pemotongan Jadual Kedua 25.
Kaedah-Kaedah ibu dipinda dengan memotong Jadual Kedua.
Penggantian Jadual Ketiga 26.
Kaedah-Kaedah ibu dipinda dengan menggantikan Jadual Ketiga dengan jadual yang berikut:
P.U. (A) 88 24
“THIRD SCHEDULE
(Rule 9A)
SPECIFICATION FOR CONSTRUCTION OF MOTOR WEHICLES
The construction of a motor vehicle shall conform to the following specifications: