NOTIS PENENTUAN MUKTAMAD AFIRMATIF PENYIASATAN MENGENAI KELUARAN PLAT GULUNGAN PANAS YANG DIIMPORT KE DALAM MALAYSIA

Keluaran yang disiasat dan pengelasan tarifnya adalah seperti yang berikut:

40.9000, yang aplikasi, standard antarabangsa, gred dan tajuknya adalah sebagaimana yang dinyatakan dalam Jadual Pertama.

Bagi maksud subsubperenggan 1(b), Kod H.S. dan AHTN adalah hanya untuk makluman dan tidak mempunyai kesan mengikat terhadap pengelasan keluaran itu.

P.U. (B) 263 3

Keluaran serupa atau keluaran yang bersaing secara langsung ialah keluaran yang dikeluarkan oleh industri dalam negeri dan mempunyai perihalan yang sama dengan keluaran yang dinyatakan dalam perenggan 1.

Berdasarkan penyiasatan, Pihak Berkuasa Penyiasat telah mendapati bahawa terdapat kenaikan secara mutlak import keluaran semasa tempoh penentuan kemudaratan iaitu mulai 1 Januari 2013 hingga 31 Disember 2013. Pihak Berkuasa

Penyiasat mendapati bahawa industri dalam negeri telah mengalami kemudaratan yang serius berkenaan dengan pengurangan syer pasaran, pengurangan dalam jualan dalam negeri, tahap produktiviti dan penggunaan kapasiti yang rendah, penurunan dalam aliran tunai, kemerosotan keuntungan dan inventori, dan pulangan pelaburan yang negatif. Perkara ini telah menyebabkan dan mengancam untuk menyebabkan kemudaratan yang serius kepada industri dalam negeri yang mengeluarkan keluaran serupa atau keluaran yang bersaing secara langsung.

Langkah pelindung yang terpakai berhubung dengan keluaran hendaklah dalam bentuk duti pelindung muktamad dan dikenakan terhadap negara yang dinyatakan dalam

Jadual Kedua.

6.

Duti pelindung muktamad hendaklah dikenakan bagi tempoh tiga tahun mulai 2 Julai 2015 hingga 1 Julai 2018 pada kadar yang berikut:

Tempoh

Duti Pelindung Muktamad (%)

2 Julai 2015 – 1 Julai 2016 17.40 %

2 Julai 2016 – 1 Julai 2017 13.90%

2 Julai 2017 – 1 Julai 2018 10.40%

P.U. (B) 263 4

JADUAL PERTAMA

[Perenggan 1]

KELUARAN PLAT GULUNGAN PANAS YANG DIKENAKAN DUTI PELINDUNG MUKTAMAD

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

Bagi struktur, pembinaan, fabrikasi dan jentera industri

EN 10025-2

Keluaran gulungan panas keluli struktur –

Bahagian 2: Syarat penghantaran teknikal bagi keluli struktur bukan aloi

BS EN 10025 -2

Keluaran gulungan panas keluli struktur –

Bahagian 2: Syarat penghantaran teknikal bagi keluli struktur bukan aloi

I.S EN 10025 -2

Keluaran gulungan panas keluli struktur –

Bahagian 2: Syarat penghantaran teknikal bagi keluli struktur bukan aloi

SN EN 10025 -2

Keluaran gulungan panas keluli struktur –

Bahagian 2: Syarat penghantaran teknikal bagi keluli struktur bukan aloi

ASTM A36/

A36M

Spesifikasi standard bagi keluli struktur karbon

ASTM A283/

A283M

Spesifikasi standard bagi plat keluli karbon berkekuatan tegangan rendah dan pertengahan

ASTM A572/

A572M

42, 50, 55, 60, 65

Spesifikasi standard bagi keluli struktur kolumbium-vanadium aloi rendah berkekuatan tinggi

P.U. (B) 263 5

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

ASTM A573/

A573M

58, 65, 70

Spesifikasi standard bagi plat keluli karbon struktur berketahanan diperbaik

A529/A529M

50, 55

Spesifikasi standard bagi keluli karbon-mangan berkekuatan tinggi berkualiti struktur

A569/A569M

Jenis A, B, C

Spesifikasi standard bagi keluli, karbon (maksimum 0.15, peratus), kepingan dan jalur gulungan panas dagangan

A570/A570M

40, 45, 50, 55

Spesifikasi standard bagi keluli struktur, jalur dan kepingan, karbon, gulungan panas

A635/A635M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

1023, 1524

Spesifikasi standard bagi keluli, jalur dan kepingan, gegelung berketebalan berat, karbon, gulungan panas

ASTM A656

/A656M

50, 60

Spesifikasi standard bagi keluli struktur gulungan panas berkekuatan tinggi, plat aloi rendah dengan kebolehbentukan diperbaik

A659/A659M

1015, 1016,

1017, 1018,

1020, 1021,

1023

Spesifikasi standard bagi keluli dagangan (CS), jalur dan kepingan, karbon

(maksimum 0.16 hingga maksimum 0.25, peratus), gulungan panas

A715/A715M

50, 60, 70

Spesifikasi standard bagi jalur dan kepingan keluli, berkekuatan tinggi, aloi rendah, gulungan panas, dan

P.U. (B) 263 6

Aplikasi

Standard

Antarabangsa

Gred

Tajuk kepingan keluli, gulungan sejuk, berkekuatan tinggi, aloi rendah, dengan kebolehbentukan diperbaik

ASTM A830

/A830M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

1022, 1023,

1025, 1026,

1524

Spesifikasi standard bagi plat, keluli karbon, kualiti struktur, diperlengkapi dengan keperluan komposisi kimia

A907/A907M

Spesifikasi standard bagi keluli, kepingan dan jalur, gegelung berketebalan berat, karbon, gulungan panas, kualiti struktur

ASME SA36/

SA 36M

Spesifikasi standard bagi keluli struktur karbon

ASME SA283/

SA283M

Spesifikasi standard bagi plat keluli karbon berkekuatan tegangan rendah dan pertengahan

SA529/SA529M

50, 55

Spesifikasi bagi keluli karbon-mangan berkekuatan tinggi berkualiti struktur

SA569/SA569M

Jenis A, B, C

Spesifikasi standard bagi keluli, karbon (maksimum 0.15, peratus), kepingan gulungan panas dan jalur dagangan

SA570/SA570M

40, 45, 50, 55

Spesifikasi standard bagi keluli struktur, kepingan dan jalur, karbon, gulungan panas

P.U. (B) 263 7

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

SA572/SA572M

42, 50, 55, 60, 65

Spesifikasi standard bagi keluli struktur kolumbium-vanadium aloi rendah berkekuatan tinggi

SA573/SA573M

58, 65, 70

Spesifikasi standard bagi plat keluli karbon struktur berketahanan diperbaik

SA635/SA635M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

1023, 1524

Spesifikasi standard bagi keluli, kepingan dan jalur, gegelung berketebalan berat, karbon, gulungan panas

ASME SA656/

SA656M

50, 60

Spesifikasi standard bagi keluli struktur gulungan panas berkekuatan tinggi, plat aloi rendah dengan kebolehbentukan diperbaik

SA659/SA659M

1015, 1016,

1017, 1018,

1020, 1021,

1023

Spesifikasi standard bagi keluli dagangan (CS), kepingan dan jalur, karbon

(maksimum 0.16 hingga maksimum 0.25, peratus), gulungan panas

SA715/SA715M

50, 60, 70

Spesifikasi standard bagi kepingan dan jalur keluli, berkekuatan tinggi, aloi rendah, gulungan panas, dan kepingan keluli, gulungan sejuk, berkekuatan tinggi, aloi rendah, dengan kebolehbentukan diperbaik

ASME SA830/

SA830M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

Spesifikasi standard bagi plat, keluli karbon, kualiti struktur, diperlengkapi dengan keperluan komposisi kimia

P.U. (B) 263 8

Aplikasi

Standard

Antarabangsa

Gred

Tajuk 1022, 1023,

1025, 1026,

1524

SA907/SA907M

Spesifikasi standard bagi keluli, kepingan dan jalur, gegelung berketebalan berat, karbon, gulungan panas, kualiti struktur

AS/NZS 3678 250, 350

Keluli struktur – Plat gulungan panas, plat dan papak lantai

AS/NZS 1594

HA 1006,

HA 1010,

HA 1016

Keluaran lembaran keluli gulungan panas

CSA G40.21 230G,

Keluli kualiti struktur – Plat, kepingan, plat lantai, bentuk bar dan dikimpal

CSA G40.20 230G,

Keperluan am bagi keluli kualiti struktur digulung atau dikimpal

BS 4360 40A, 40B, 40C,

40D, 43A, 43B,

43C, 43D, 50A,

50B, 50C, 50D

Spesifikasi bagi keluli struktur boleh kimpal

JIS G 3101

SS330, SS400

SS490, SS540

Keluli digulung bagi

Struktur Am

JIS G 3111

SRB 330

SRB 380

SRB 480

Keluli karbon digulung semula

JIS G 3131

Plat, kepingan dan jalur keluli lembut gulungan panas

P.U. (B) 263 9

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

JIG G 3132

Jalur keluli karbon gulungan panas bagi paip dan tiub

JIS G 3106

Keluli digulung bagi struktur dikimpal

NBN EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

NEN EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

CSN EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

SFS EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

NF EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

P.U. (B) 263 10

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

DIN EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

UNI EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

NS EN10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

PN EN10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

UNE EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

SS EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

DIN 17100

RSt 37-2

St 37-3U

St 44-2

St 44-3U

St 52-3

St 52-3U

Keluli bagi tujuan struktur am

P.U. (B) 263 11

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

NFA 35-501

E 24-2

E 24-3

E 28-2

E 28-3

E 36-2

E 36-3

Spesifikasi standard adalah bagi plat keluli karbon berkekuatan tegangan rendah dan pertengahan

UNI 7070

Keluaran siap gulungan panas keluli asas tiada aloi dan kualiti. Seksyen, bar dagangan, lembaran lebar, plat, kepingan, jalur dan gegelung bagi tujuan kejuruteraan dan struktur

NBN 21-101

AE 235B

AE 235C

AE 295B

AE 295C

AE 355B

AE 355C

Standard bagi keluli struktur

MNC 810E

SS13.11.00

SS13.12.00

SS14.12.00

SS21.32.01

SS21.34.01

Standard bagi keluli struktur

IS

IS226

Fe 410-S

IS 2062

Fe 410 WA

IS961

FE570 HT

Keluli bagi tujuan struktur am

ISO 630

Keluli struktur – plat, lembaran lebar, bar, seksyen dan profil

ISO 4995

HR235, HR275

dan HR355;

kelas B dan D

Kepingan keluli gulungan panas berkualiti struktur

P.U. (B) 263 12

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

GB 700

Q195, Q215,

Q235, Q255,

Q275

Keluli struktur karbon

GB 711 08

Plat keluli struktur dan jalur lebar karbon kualiti gulungan panas

MS 1768

Jalur keluli karbon gulungan panas bagi paip dan tiub

MS 1705

Jalur keluli karbon dan kepingan gulungan panas berkualiti komersial dan lukisan

MS EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

TIS 1499-2541

Gegelung keluli karbon, jalur, plat dan kepingan gulungan panas bagi struktur dikimpal

TIS 1735-2542

Gegelung keluli karbon dan jalur gulungan panas bagi paip dan tiub

KS D 3503

SS330

SS400

SS490

SS540

Keluli digulung bagi struktur am

P.U. (B) 263 13

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

KS D 3515

Keluli digulung bagi struktur dikimpal

GOST 16523

08ps,

10ps,

10,

15ps,

15,

20ps,

20,

St1ps,

St2ps,

St1sp,

St2sp,

St3ps,

St3sp

Kepingan keluli aplikasi am kualiti karbon dan kualiti lazim gulungan panas

GOST 14637

St2ps,

St2sp,

St3sp,

St3ps,

St3Gps,

St3Gsp

Plat keluli karbon kualiti lazim

ONORM M1316

Rst360B

Keluli struktur kualiti bukan aloi

ONORM EN

10025 -2

S355J2,S355K2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

P.U. (B) 263 14

JADUAL KEDUA

[Perenggan 5]

NEGARA YANG DIKENAKAN DUTI PELINDUNG MUKTAMAD

1.

Australia 2.

Kanada 3.

Republik Czech 4.

Republik Persekutuan Jerman 5.

Perancis 6.

Luxembourg 7.

Greece 8.

Hungary 9.

Ireland 10.

Itali 11.

Jepun 12.

Negara Belgium 13.

Negara Denmark 14.

Negara Norway 15.

Negara Sepanyol 16.

Negara Sweden 17.

Negara Belanda 18.

New Zealand 19.

Republik Rakyat China 20.

Republik Portugal 21.

Liechtenstein 22.

Republik Austria 23.

Republik Bulgaria 24.

Republik Cyprus 25.

Republik Estonia 26.

Republik Finland 27.

Republik Iceland 28.

Republik Indonesia 29.

Republik Korea 30.

Republik Latvia 31.

Republik Lithuania 32.

Republik Malta 33.

Republik Poland 34.

Republik Singapura 35.

Republik Slovenia 36.

Romania 37.

Slovakia 38.

Negara Israel 39.

Switzerland

P.U. (B) 263 15

Bertarikh 26 Jun 2015

[MITI:ID/(S/AP/SG/045/3 Jld 2); PN(PU2)647/IV]

40.

Ukraine 41.

United Kingdom of Great Britain dan Ireland Utara 42.

Amerika Syarikat

DATO’ SRI MUSTAPA BIN MOHAMED

Menteri Perdagangan Antarabangsa dan Industri

P.U. (B) 263 16

SAFEGUARDS ACT 2006

NOTICE OF AFFIRMATIVE FINAL DETERMINATION OF AN INVESTIGATION WITH

REGARD TO HOT ROLLED PLATES PRODUCTS IMPORTED INTO MALAYSIA

(SM 01/14)

IN exercise of the powers conferred by subsection 23(3)

of the

Safeguards Act 2006 [Act 657] and regulation 14 of the Safeguards Regulations 2007

[P.U. (A) 386/2007], the Government has made an affirmative final determination in relation to the investigation with regard to the hot rolled plates products imported into

Malaysia as described in paragraph 1 (“products”).

Products under investigation and tariff classification 1.

The products under investigation and its tariff classification are as follows:

(a)

the hot rolled steel plate products of iron or non-alloy steel and other alloy steel, of a width of 600 millimetres or more, hot rolled, not clad, plated or coated, of a thickness between 6 millimetres to 75 millimetres; and

(b)

the products classified under the Harmonised System Code

(H.S. Code) 7208.51.000, 7208.52.000, 7225.40.000, and ASEAN

Harmonised

Tariff

Nomenclature

(AHTN)

7208.51.0000,

7208.52.0000, 7225.40.9000, which applications, international standards, grades and titles are as specified in the

First Schedule.

2.

For the purposes of subsubparagraph 1(b), the H.S Code and AHTN are only for information and shall have no binding effect on the classification of the products.

P.U. (B) 263 17

Like products or directly competitive products 3.

The like products or directly competitive products are products which are produced by the domestic industry and have the same description as the products specified in paragraph 1.

Reasons for affirmative final determination 4.

Based on the investigation, the Investigating Authority has found that there was an increase in imports of the products in absolute terms during the period of injury determination that is from 1 January 2013 until 31 December 2013. The Investigating

Authority has found that the domestic industry has suffered serious injury in respect of the decline in market share, decline in domestic sales, low production and capacity utilisation, decline in cash flow, decline in profitability and inventory, and negative return on investment. These have caused and are threatening to cause serious injury to the domestic industry that produces like or directly competitive products.

Safeguards measures applicable 5.

The safeguards measures applicable in relation to the products shall take the form of definitive safeguards duties and shall be imposed on the countries specified in the

Second Schedule.

6.

Definitive safeguards duties shall be imposed for a period of three years from 2 July 2015 until 1 July 2018 at the following rates:

Period

Definitive Safeguards Duties (%)

2 July 2015 – 1 July 2016 17.40 %

2 July 2016 – 1 July 2017 13.90%

2 July 2017 – 1 July 2018 10.40%

P.U. (B) 263 18

FIRST SCHEDULE

[Paragraph 1]

HOT ROLLED PLATES PRODUCTS WHICH ARE IMPOSED WITH THE DEFINITIVE

SAFEGUARDS DUTIES

Applications

International

Standards

Grades

Titles

For structural, construction, fabrication and industry machinery

EN 10025 -2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

BS EN 10025 -2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

I.S EN 10025 -2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

SN EN 10025 -2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

ASTM A36/

A36M

Standard specifications for carbon structural steel

ASTM A283/

A283M

Standard specifications for low and intermediate tensile strength carbon steel plates

ASTM A572/

A572M

42, 50, 55, 60, 65 Standard specifications for high-strength low-alloy -

columbium-vanadium structural steel

P.U. (B) 263 19

Applications

International

Standards

Grades

Titles

ASTM A573/

A573M

58, 65, 70

Standard specifications for structural carbon steel plates of improved toughness

A529/A529M

50, 55

Standard specification for high-strength carbon-manganese steel of structural quality

A569/A569M

Type A, B, C

Standard specification for steel, carbon (0.15 maximum, percent), hot-rolled sheet and strip commercial

A570/A570M

40, 45, 50, 55

Standard specification for structural steel, sheet and strip, carbon, hot-rolled

A635/A635M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

1023, 1524

Standard specification for steel, sheet and strip, heavy-thickness coils, carbon, hot-rolled

ASTM A656

/A656M

50, 60

Standard specification for hot-rolled structural steel high strength, low-alloy plates with improved formability

A659/A659M

1015, 1016,

1017, 1018,

1020, 1021,

1023

Standard specification for commercial steel (CS), sheet and strip, carbon (0.16

maximum to 0.25 maximum, percent), hot-rolled

A715/A715M

50, 60, 70

Standard specification for steel sheet and strip, high-strength, low-alloy, hot-rolled, and steel sheet, cold-rolled, high-strength, low-alloy, with improved formability

P.U. (B) 263 20

Applications

International

Standards

Grades

Titles

ASTM A830

/A830M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

1022, 1023,

1025, 1026,

1524

Standard specification for plates, carbon steel, structural quality, furnished to chemical composition requirements

A907/A907M

Standard specification for steel, sheet and strip, heavy thickness coils, carbon, hot rolled, structural quality

ASME SA36/

SA 36M

Standard specification for carbon structural steel

ASME SA283/

SA283M

Standard specification for low and intermediate tensile strength carbon steel plates

SA529/SA529M

50, 55

Specification for high-strength carbon-manganese steel of structural quality

SA569/SA569M

Type A, B, C

Standard specification for steel, carbon (0.15 maximum, percent), hot-rolled sheet and strip commercial

SA570/SA570M

40, 45, 50, 55

Standard specification for structural steel, sheet and strip, carbon, hot-rolled

SA572/SA572M

42, 50, 55, 60, 65 Standard specification for high-strength low-alloy columbium-vanadium structural steel

SA573/SA573M

58, 65, 70

Standard specification for structural carbon steel plates of improved toughness

P.U. (B) 263 21

Applications

International

Standards

Grades

Titles

SA635/SA635M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

1023, 1524

Standard specification for steel, sheet and strip, heavy-thickness coils, carbon, hot-rolled

ASME SA656/

SA656M

50, 60

Standard specification for hot rolled structural steel high strength, low alloy plates with improved formability

SA659/SA659M

1015, 1016,

1017, 1018,

1020, 1021,

1023

Standard specification for commercial steel (CS), sheet and strip, carbon (0.16

maximum to 0.25 maximum, percent), hot-rolled

SA715/SA715M

50, 60, 70

Standard specification for steel sheet and strip, high-strength, low-alloy, hot-rolled, and steel sheet, cold-rolled, high-strength, low-alloy, with improved formability

ASME SA830/

SA830M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

1022, 1023,

1025, 1026 1524

Standard specification for plates, carbon steel, structural quality, furnished to chemical composition requirements

SA907/SA907M

Standard specification for steel, sheet and strip, heavy thickness coils, carbon, hot-rolled, structural quality

AS/NZS 3678 250, 350

Structural steel – Hot-rolled plates, floor plates and slabs

P.U. (B) 263 22

Applications

International

Standards

Grades

Titles

AS/NZS 1594

HA 1006,

HA 1010,

HA 1016

Hot rolled steel flat products

CSA G40.21 230G,

Structural quality steel –

Plates, sheet, floor plates, bars and welded shapes

CSA G40.20 230G,

General requirements for rolled or welded structural quality steel

BS 4360 40A, 40B, 40C,

40D, 43A, 43B,

43C, 43D, 50A,

50B, 50C, 50D

Specifications for weldable structural steels

JIS G 3101

SS330, SS400

SS490, SS540

Rolled steel for General

Structure

JIS G 3111

SRB 330

SRB 380

SRB 480

Rerolled carbon steel

JIS G 3131

Hot rolled mild steel plates, sheets and strip

JIG G 3132

Hot-rolled carbon steel strip for pipes and tubes

JIS G 3106

Rolled steels for welded structure

P.U. (B) 263 23

Applications

International

Standards

Grades

Titles

NBN EN 10025-2 S235JR, S235JO,

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

NEN EN 10025-2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

CSN EN 10025-2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

SFS EN 10025-2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

NF EN 10025-2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

DIN EN 10025-2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

UNI EN 10025-2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

NS EN10025-2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions

P.U. (B) 263 24

Applications

International

Standards

Grades

Titles for non-alloy structural steels

PN EN10025-2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

UNE EN 10025-2 S235JR, S235JO,

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

SS EN 10025-2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

DIN 17100

RSt 37-2

St 37-3U

St 44-2

St 44-3U

St 52-3

St 52-3U

Steels for general structure purposes

NFA 35-501

E 24-2

E 24-3

E 28-2

E 28-3

E 36-2

E 36-3

Standard specification is for low and intermediate tensile strength carbon steel plates

UNI 7070

Hot rolled finished product of unalloyed basic and quality steel. Section, merchant bars, wide flats, plates, sheets, strips and coils for structural and engineering purposes

NBN 21-101

AE 235B

AE 235C

AE 295B

Standard for structural steel

P.U. (B) 263 25

Applications

International

Standards

Grades

Titles

AE 295C

AE 355B

AE 355C

MNC 810E

SS13.11.00

SS13.12.00

SS14.12.00

SS21.32.01

SS21.34.01

Standard for structural steel

IS

IS226

Fe 410-S

IS 2062

Fe 410 WA

IS961

FE570 HT

Steel for general structural purposes

ISO 630

Structural steels – plates, wide flats, bars, sections and profiles

ISO 4995

HR235, HR275

and HR355;

classes B and D

Hot-rolled steel sheet of structural quality

GB 700

Q195, Q215,

Q235, Q255,

Q275

Carbon structural steels

GB 711 08

Hot-rolled quality carbon structural steel plates and wide strips

MS 1768

Hot-rolled carbon steel strip for pipes and tubes

MS 1705

Hot-rolled carbon steel strip and sheet of commercial and drawing qualities

P.U. (B) 263 26

Applications

International

Standards

Grades

Titles

MS EN 10025-2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

TIS 1499-2541

Hot-rolled carbon steel coil, strip, plate and sheet for welded structure

TIS 1735-2542

Hot-rolled carbon steel coil and strip for pipes and tubes

KS D 3503

SS330

SS400

SS490

SS540

Rolled steels for general structures

KS D 3515

Rolled steels for welded structure

GOST 16523

08ps,

10ps,

10,

15ps,

15,

20ps,

20,

Hot rolled carbon quality and common quality general application steel sheet

P.U. (B) 263 27

Applications

International

Standards

Grades

Titles

St1ps,

St2ps,

St1sp,

St2sp,

St3ps,

St3sp

GOST 14637

St2ps,

St2sp,

St3sp,

St3ps,

St3Gps,

St3Gsp

Common quality carbon steel plate

ONORM M1316

Rst360B

Non alloy quality structural steel

ONORM EN

10025 -2

Hot rolled products of structural steels – Part 2:

Technical delivery conditions for non-alloy structural steels

SECOND SCHEDULE

[Paragraph 5]

COUNTRIES IMPOSED WITH DEFINITIVE SAFEGUARDS DUTIES

1.

Australia 2.

Canada 3.

Czech Republic 4.

Federal Republic of Germany 5.

France 6.

Luxembourg 7.

Greece 8.

Hungary 9.

Ireland 10.

Italy 11.

Japan 12.

Kingdom of Belgium

P.U. (B) 263 28

Dated 26 June 2015

[MITI:ID/(S/AP/SG/045/3 Jld 2); PN(PU2)647/IV]

13.

Kingdom of Denmark 14.

Kingdom of Norway 15.

Kingdom of Spain 16.

Kingdom of Sweden 17.

Kingdom of the Netherlands 18.

New Zealand 19.

People's Republic of China 20.

Portuguese Republic 21.

Liechtenstein 22.

Republic of Austria 23.

Republic of Bulgaria 24.

Republic of Cyprus 25.

Republic of Estonia 26.

Republic of Finland 27.

Republic of Iceland 28.

Republic of Indonesia 29.

Republic of Korea 30.

Republic of Latvia 31.

Republic of Lithuania 32.

Republic of Malta 33.

Republic of Poland 34.

Republic of Singapore 35.

Republic of Slovenia 36.

Romania 37

Slovakia 38.

State of Israel 39.

Switzerland 40.

Ukraine 41.

United Kingdom of Great Britain and Northern Ireland 42.

United States of America

DATO’ SRI MUSTAPA BIN MOHAMED

Minister of International Trade and Industry