PERATURAN-PERATURAN ELEKTRIK (PINDAAN) 2013

Peraturan-Peraturan Elektrik 1994 [P.U. (A) 38/1994], yang disebut “Peraturan-Peraturan ibu” dalam Peraturan-Peraturan ini, dipinda dalam peraturan 2–

Peraturan-Peraturan ibu dipinda dengan menggantikan subperaturan (1) dengan subperaturan yang berikut–

“(1)

Tertakluk kepada peraturan 97C, 97D, 97E dan 101A, tiada seorang pun boleh mengilang, mengimport, mempamer, menjual atau mengiklan–

peraturan-peraturan yang berikut:

“Pengiktirafan badan penilaian pematuhan asing.

Jadual Pertama.

Pendaftaran pengilang dan pengimport.

97C. (1) Mana-mana orang yang mengilang atau mengimport apa-apa kelengkapan di bawah peraturan 97 hendaklah memohon untuk berdaftar dengan Suruhanjaya, mengikut cara yang boleh ditetapkan oleh Suruhanjaya.

P.U. (A) 151 7

Perakuan Pendaftaran untuk mengilang atau mengimport sebagaimana yang dinyatakan dalam Borang V1 Jadual Pertama.

Pengemukaan laporan ujian atau Perakuan

Pematuhan oleh pengilang.

97D. (1) Mana-mana pengilang yang dikeluarkan dengan suatu

Perakuan Pendaftaran di bawah peraturan 97C hendaklah mengemukakan kepada Suruhanjaya—

hendaklah dikeluarkan oleh suatu makmal ujian yang diakreditasi oleh pihak berkuasa akreditasi dan laporan ujian itu hendaklah sah untuk tidak kurang dari satu tahun dan tidak melebihi lima tahun dari tarikh laporan itu.

Perakuan Pematuhan, mengikut mana-mana yang sesuai, pengilang hendaklah mengemukakan laporan ujian atau Perakuan Pematuhan

P.U. (A) 151 8

yang baru mengikut peraturan ini.

Pengemukaan laporan ujian atau Perakuan

Pematuhan oleh pengimport.

97E. (1) Mana-mana pengimport yang dikeluarkan dengan suatu Perakuan Pendaftaran di bawah peraturan 97C hendaklah mengemukakan kepada Suruhanjaya—

(a)

suatu laporan ujian berkaitan pematuhan kelengkapan dengan standard keselamatan sebagaimana yang diiktiraf oleh Suruhanjaya; atau

(b)

suatu

Perakuan

Pematuhan yang dikeluarkan oleh badan penilaian pematuhan asing yang diiktiraf

Suruhanjaya di bawah peraturan 97A.

hendaklah dikeluarkan oleh suatu makmal ujian yang diiktiraf

Suruhanjaya dan laporan itu hendaklah sah untuk tidak kurang dari satu tahun dan tidak melebihi lima tahun dari tarikh laporan itu.

Perakuan Pematuhan, mengikut mana-mana yang berkenaan,

P.U. (A) 151 9

Tanggungjawab untuk menyimpan fail teknikal kelengkapan, dsb.

pengimport hendaklah mengemukakan laporan ujian atau Perakuan

Pematuhan yang baru kepada Suruhanjaya mengikut peraturan ini.

Pematuhan itu mempunyai tempoh keesahan tidak kurang dari satu tahun dari tarikh tamat tempoh laporan ujian atau Perakuan

Pematuhan itu .

97F. (1) Seorang pengilang atau pengimport yang dikeluarkan dengan suatu Perakuan Pendaftaran di bawah peraturan 97C hendaklah menyimpan semua fail teknikal apa-apa kelengkapan yang dikeluarkan bersama-sama dengan suatu laporan ujian atau

Perakuan Pematuhan, mengikut mana-mana yang sesuai, untuk tidak kurang dari sepuluh tahun selepas kelengkapan terakhir meninggalkan peringkat pengeluaran.

Pematuhan itu.”.

P.U. (A) 151 10

Peraturan baru 101A, 101B dan 101C

6.

Bahagian III Peraturan-Peraturan ibu dipinda di bawah kepala “Kelulusan

Kelengkapan” dengan memasukkan selepas peraturan 101 peraturan-peraturan yang berikut:

“Penggunaan elektrik dengan cekap oleh kelengkapan.

Laporan ujian prestasi tenaga.

101A. (1) Bagi maksud penggunaan elektrik dengan cekap, sebelum permohonan untuk suatu Perakuan Kelulusan di bawah peraturan 97, mana-mana orang yang mengilang, mengimport, menjual atau membuat tawaran untuk menjual atau memajak apa-apa kelengkapan di bawah peraturan itu, hendaklah memastikan bahawa kelengkapan itu menepati standard ujian prestasi tenaga, standard prestasi tenaga minimum dan penarafan kecekapan sebagaimana yang dinyatakan dalam Jadual Keempat.

101B. (1) Suatu laporan ujian prestasi tenaga di bawah subperaturan 101A(2)

hendaklah dikemukakan kepada

Suruhanjaya, mengikut cara yang boleh ditentukan oleh

Suruhanjaya.

P.U. (A) 151 11

Pengemukaan untuk ujian dan penyitaan bagi maksud penggunaan elektrik dengan cekap.

101C. (1) Suruhanjaya boleh, pada bila-bila masa, melalui notis secara bertulis, menghendaki mana-mana orang yang mengilang, mengimport, menjual atau membuat tawaran untuk jualan atau pajakan kelengkapan yang disebut dalam peraturan 101A, untuk menghantar, dalam tempoh sebagaimana yang dinyatakan dalam notis itu, sampel kelengkapan itu untuk suatu pemeriksaan dan ujian.

P.U. (A) 151 12

penyitaan dan pengalihan kelengkapan di bawah subperaturan (1)

atau (2), mengikut mana-mana yang sesuai.”.

Pindaan peraturan 102 7.

Peraturan 102 Peraturan-Peraturan ibu dipinda dengan mengantikan perkataan “71, 75, 80, 84, 88 atau 92” perkataan “71, 75, 80, 84, 88, 92, 97B atau 97C”.

Pindaan peraturan 103 8.

Subperaturan 103(1) dan (2) Peraturan-Peraturan ibu dipinda dengan mengantikan perkataan “71, 75, 80, 84, 88 atau 92” perkataan “71, 75, 80, 84, 88, 92,

97B atau 97C”.

Pindaan peraturan 104 9.

Subperaturan 104(1) Peraturan-Peraturan ibu dipinda dengan mengantikan perkataan “71, 75, 80, 84, 88 atau 92” perkataan “71, 75, 80, 84, 88, 92, 97B atau 97C”.

Pindaan peraturan 105 10.

Subperaturan 105(1) Peraturan-Peraturan ibu dipinda dengan mengantikan perkataan “71, 75, 80, 84, 88 atau 92” perkataan “71, 75, 80, 84, 88, 92, 97B atau 97C”.

Peraturan baru 109A

11.

Peraturan-Peraturan ibu dipinda dengan memasukkan selepas peraturan 109

peraturan yang berikut:

“Pemantauan pasaran.

109A. (1) Suruhanjaya boleh, dari semasa ke semasa, menjalankan pemantauan pasaran untuk menentukan jika mana-mana kelengkapan yang disebut dalam peraturan 97 adalah selamat dan ditampalkan dengan label mengikut peraturan 98 atau dengan label penarafan kecekapan, atau kedua-duanya, mengikut mana-mana yang berkenaan.

P.U. (A) 151 13

(a)

membuang, menarik balik atau membantu dalam pembuangan atau penarikan balik apa-apa kelengkapan yang tidak dilabelkan mengikut peraturan 98 atau yang tidak mempunyai label penarafan kecekapan, atau kedua-duanya, mengikut mana-mana yang berkenaan, dari mana-mana premis dengan tujuan untuk mengadang atau menghalang Suruhanjaya, pegawai diberi kuasa atau agennya daripada melaksanakan apa-apa kuasanya; atau

(b)

melindungi, menyimpan, menyembunyikan atau memiliki apa-apa kelengkapan yang tidak dilabelkan mengikut peraturan 98 atau yang tidak mempunyai label penarafan kecekapan, atau kedua-duanya, mengikut mana-mana yang berkenaan, dengan niat untuk menjual atau menawarkan untuk dijual, melakukan suatu kesalahan.”.

Peruntukan kecualian dan peralihan 12.

(1)

Mana-mana badan penilaian pematuhan tempatan sedia ada sememangnya beroperasi sebelum berkuatkuasanya

Peraturan-Peraturan ini, hendaklah memohon untuk berdaftar dengan Suruhanjaya dalam tempoh enam bulan dari tarikh bermulanya kuat kuasa Peraturan-Peraturan ini.

(2)

Apabila berkuat kuasanya Peraturan-Peraturan ini, mana-mana pengilang atau pengimport hendaklah memohon untuk berdaftar dengan Suruhanjaya mengikut peraturan 97C, dalam tempoh satu tahun dari tarikh bermulanya kuat kuasa Peraturan-Peraturan ini.

P.U. (A) 151 14

(3)

Apa-apa kelengkapan sedia ada yang telah dikilangkan, diimport, dijual atau ditawarkan untuk jualan atau pajakan sebelum berkuatkuasanya Peraturan-Peraturan ini hendaklah dikehendaki untuk mematuhi peraturan 101A, dalam tempoh satu tahun dari tarikh bermulanya kuat kuasa Peraturan-Peraturan ini.

Pindaan Jadual Pertama 13.

Peraturan-Peraturan ibu dipinda dalam Jadual Pertama–

(a)

dengan memasukkan selepas Borang U borang yang berikut:

“BORANG U1

(Peraturan 97B)

PERAKUAN PENDAFTARAN SEBAGAI BADAN PENILAIAN PEMATUHAN

Suruhanjaya Tenaga dengan ini memperakui menurut seksyen

4(l)

Akta

Bekalan

Elektrik

1990

bahawa

…………………………………………………………………………………………………………………………

di……………………………………………………………………………………………..……………………….

……………………...........................................................…………………………………………………………

telah memenuhi kehendak-kehendak Akta dan Peraturan-Peraturan yang dibuat di bawahnya.

Suruhanjaya

Tenaga memperakui bahawa

…………………………………………………………………………………………………………………...........

…………………………………………… yang disebut di atas telah didaftarkan dan

Perakuan Pendaftaran ini adalah sah selama …………. tahun dari tarikh dikeluarkan yang dinyatakan di bawah.

Tarikh dikeluarkan: …..............

Tempat: …......................

….........................…………….

Suruhanjaya Tenaga

P.U. (A) 151 15

_____________________________________________________________________________________________

* Tidak kurang daripada satu tahun dan tidak melebihi tiga tahun.”;

(b)

dengan memasukkan selepas Borang V borang yang berikut:

“BORANG V1

(Peraturan 97C)

PERAKUAN PENDAFTARAN UNTUK MENGILANG/ MENGIMPORT*

Suruhanjaya Tenaga dengan ini memperakui menurut seksyen 4(k)

Akta

Bekalan

Elektrik 1990

bahawa…………………………………………………………………………………………………………..

di……………………………………………...........................................................……………………………

..……………………………………………………………………………………………………………………

telah memenuhi kehendak-kehendak Akta dan Peraturan-Peraturan yang dibuat di bawahnya.

Suruhanjaya

Tenaga memperakui bahawa

………………………………………………………………………………………………………………............

……………………………………………. yang disebut di atas telah didaftarkan dan

Perakuan Pendaftaran ini adalah sah selama …………tahun dari tarikh dikeluarkan yang dinyatakan di bawah.

Tarikh dikeluarkan: …..............

Tempat: …......................

.........................…………….

Suruhanjaya Tenaga

___________________________________________________________________________________________

* Potong mana-mana yang tidak berkenaan

** Tidak kurang daripada satu tahun dan tidak melebihi lima tahun.”.

P.U. (A) 151 16

Jadual Keempat baru 14.

Peraturan-Peraturan ibu dipinda dengan memasukkan selepas Jadual Ketiga jadual baru yang berikut:

“JADUAL KEEMPAT

(Subperaturan 101A (1))

STANDARD UJIAN PRESTASI TENAGA, STANDARD PRESTASI TENAGA MINIMUM DAN

PENARAFAN KECEKAPAN BAGI MAKSUD PENGGUNAAN ELEKTRIK DENGAN CEKAP

Kelengkapan

Jenis

Kelengkapan

Standard Ujian

Prestasi Tenaga

Standard Prestasi

Tenaga Minimum

Penarafan Kecekapan

Peti sejuk

MS IEC

62552:2011

(Kelengkapan penyejukan isi rumah-Ciri-ciri dan kaedah ujian)

Bintang

Penarafan

Bintang

Nilai

Indeks

Bintang 5

+25%≤Indeks

Bintang 4

+10%≤Indeks

Bintang<+25%

3

-10%≤ Indeks

Bintang <+10%

2

-25%≤ Indeks

Bintang <-0%

1

-35%≤ Indeks

Bintang < -25%

P.U. (A) 151 17

Kelengkapan

Jenis

Kelengkapan

Standard Ujian

Prestasi Tenaga

Standard Prestasi

Tenaga Minimum

Penarafan Kecekapan

Penghawa dingin

Penghawa dingin pecahan tunggal yang dipasang di dinding berkapasiti sehingga 25,000 Btu/j

MS ISO 5151:2004

(Penghawa dingin dan pam haba tanpa salur:

Pengujian dan penarafan bagi prestasi)

Bintang

< 4.5kW:

7.1kW:

Penarafan

Bintang

Nilai Indeks

Bintang 5

≥10.71 4 9.83 - 10.70 3 8.94 - 9.82 2 8.03 - 8.93 1 7.50 - 8.02

Penarafan

Bintang

Nilai Indeks

Bintang 5

≥11.94 4 11.16 -11.93 3 10.37 - 11.15 2 9.56 - 10.3

1 9.00- 9.55

P.U. (A) 151 18

Kelengkapan

Jenis

Kelengkapan

Standard Ujian

Prestasi Tenaga

Standard Prestasi

Tenaga Minimum

Penarafan Kecekapan

Televisyen

Jenis-jenis televisyen adalah daripada senarai seperti di bawah dan bersaiz sehingga atau sama dengan 70 inci:

(LED)

Edisi 2.0 2008-

10 bagi ukuran kuasa pada Mod

Buka

62301:2006

bagi ukuran kuasa pada Mod

Sedia

BIntang

Penarafan

Bintang

Nilai Indeks

Bintang 5

+20%≤

Indeks

Bintang 4

+10%≤

Indeks

Bintang

<+20%

3

-10%≤

Indeks

Bintang

<+10%

2

-20%≤

Indeks

Bintang

<-10%

1

-30% ≤

Indeks

Bintang

<-20%

Kipas domestik

MS 1220:2001

(Prestasi dan pembinaan kipas berpusing elektrik dan pengatur)

semakan kedua

Bintang

(a)

Kipas siling:

Penarafan

Bintang

Nilai

Indeks

Bintang 5

 3.00 4 2.74 – 2.99 3 2.66 – 2.73 2 2.58 – 2.65 1 2.50– 2.57

P.U. (A) 151 19

Kelengkapan

Jenis

Kelengkapan

Standard Ujian

Prestasi Tenaga

Standard Prestasi

Tenaga Minimum

Penarafan Kecekapan

Penarafan

Bintang

Nilai Indeks

Bintang

5

 1.20 4 1.12 – 1.19 3 1.08 – 1.11 2 1.01 – 1.07 1 0.93 – 1.00

Lampu

(CFL)

(lampu berbalast sendiri bagi perkhidmatan pencahayaan umum-Kehendak prestasi) bagi lampu pendarfluor

(Kaedah yang diluluskan oleh

IESNA bagi ukuran elektrik dan fotometri produk lampu keadaan pepejal) bagi lampu LED

(P)

Jenis

(W)

STPM

(lm/W)

T8 18-30 70

31 85

T5

14 80

15 85

Tiada

P.U. (A) 151 20

Kelengkapan

Jenis

Kelengkapan

Standard Ujian

Prestasi Tenaga

Standard Prestasi

Tenaga Minimum

Penarafan Kecekapan

(lampu LED berbalast sendiri bagi perkhidmatan pencahayaan umum-Kehendak prestasi)

Jenis

STPM

(lm/

W)

CFLi

(berbalast sendiri)

< 9 W

55 9- 15 W

60 16-24 W

60

25 W

60

CFL (lampu tidak bersepadu)

≤

0

W

60 11-26 W

65

 27 W

85

Lampu LED

55

Lampu pijar*

20

*Nilai standard prestasi tenaga minimum (SPTM) bagi lampu pijar yang disebut diatas hendaklah tidak terpakai bagi penggunaan seperti berikut:

(a)

komponen dalam kelengkapan elektrik;

(b)

perubatan dan makmal ujikaji;

(d)

keselamatan dan isyarat;

(g)

kebersihan dan kesihatan;

(h)

rawatan kecantikan;

P.U. (A) 151 21

Dibuat 2 Mei 2013

[KeTTHA: BP(R) 427/1-1 Klt. PN(PU2) 486/VI]

DATO’ SRI PETER CHIN FAH KUI

Menteri Tenaga, Teknologi Hijau dan Air

P.U. (A) 151 22

ELECTRICITY (AMENDMENT) REGULATIONS 2013

In exercise of the powers conferred by section 53 of the Electricity Supply Act 1990 [Act 447], the Minister makes the following regulations:

Citation and commencement 1.

(1)

These regulations may be cited as the Electricity (Amendment)

Regulations 2013.

(2)

These Regulations come into operation on 3 May 2013.

Amendment of regulation 2 2.

The Electricity Regulations 1994 [P.U. (A) 38/1994], which are referred to as the

“principal Regulations” in these Regulations, are amended in regulation 2─

(a)

by inserting after the definition of “accessory” the following definition:

““accreditation authority” means the Director General of the

Department of Standards as specified in the Standards of Malaysia

Act 1996 [Act 549];”;

(b)

by inserting after the definition of “Certificate of Approval” the following definition:

““Certificate of Conformity” means a certificate issued by a conformity assessment body;”;

(c)

by inserting after the definition of “Competent Electrical Engineer” the following definitions:

““conformity assessment body” means a foreign or local conformity assessment body whose activities and expertise

P.U. (A) 151 23

includes performance of all or any stage of the conformity assessment process;”;

(d)

by inserting after the definition of “earthed” the following definition:

““efficiency rating label” means a label which provides information of energy performance level of an equipment as specified in regulation 101A;”;

(e)

by inserting after the definition of “final circuit” the following definition:

““foreign conformity assessment body” means a conformity assessment body who has its place of business in a country other than Malaysia and where the country has entered into a mutual recognition agreement with Malaysia;”;

(f)

by inserting after the definition of “line conductor” the following definition:

““local conformity assessment body” means a conformity assessment body who has its place of business in Malaysia and is registered with the Commission in accordance with regulation 97B;”;

(g)

by inserting after the definition of “multiple-earth neutral” the following definition:

““mutual recognition agreement” means any agreement or arrangement between Malaysia and any other country;”.

P.U. (A) 151 24

Amendment of regulation 47 3.

Subregulation 47(1) of the principal Regulations is amended–

(a)

in paragraph (b) by inserting after the words “electrical engineering” the words “or electrical and electronic engineering”;

(b)

in paragraph (c) by inserting after the words “electrical engineering” the words “or electronic engineering”;

(c)

by substituting for paragraph (d) the following paragraph:

“(d)

in the case of a Professional Engineer in electrical engineering, that he has not less than five years experience working in an environment in the power sector where electrical equipment is in operation and has had experience of controlling live equipment;”; and

(d)

by inserting after paragraph (d) the following paragraph:

“(da) in the case of a Professional Engineer in electronic engineering, that he has not less than eight years experience working in an environment in the power sector where electrical equipment is in operation and has had experience of controlling live equipment;”.

Amendment of regulation 97 4.

Regulation 97 of the principal Regulations is amended by substituting for subregulation (1) the following subregulation:

“(1) Subject to regulations 97C, 97D, 97E and 101A, no person shall manufacture, import, display, sell or advertise—

P.U. (A) 151 25

(a)

any domestic equipment;

(b)

any low voltage equipment which is usually sold directly to the general public; or

(c)

any low voltage equipment which does not require special skills in its operation, unless the equipment is approved by the Commission.”.

New regulations 97A, 97B, 97C, 97D, 97E and 97F

5.

The principal Regulations are amended by inserting after regulation 97 the following regulations:

“Recognition of foreign conformity assessment body.

97A. (1) For the purposes of certifying any equipment under regulation 97, the Commission shall give a recognition to a foreign conformity assessment body, in a manner that may be determined by the Commission.

Provided that, the foreign conformity assessment body shall be recognized, registered or licensed by the relevant authority in the country in which the foreign conformity assessment body carries on its business.

P.U. (A) 151 26

purposes of this Part, without prejudice to any further testing or assessment to be done to them as the Commission deems necessary.

Registration of local conformity assessment body.

97B. (1) For the purposes of certifying any equipment under regulation 97, a local conformity assessment body shall apply to be registered with the Commission, in a manner that may be determined by the Commission.

Provided that, the local conformity assessment body has been accredited by the accreditation authority.

Schedule.

shall be valid for not less than one year and not exceeding three years from the date of issue or renewal of such certificate.

Registration of manufacturer and importer.

97C. (1) Any person who manufactures or imports any equipment under regulation 97 shall apply to be registered with the

Commission, in a manner that may be determined by the Commission.

P.U. (A) 151 27

Submission of test report or

Certificate of

Conformity by manufacturer.

97D. (1)

Any manufacturer issued with a Certificate of

Registration under regulation 97C shall submit to the

Commission—

(a)

a test report as to the equipment’s conformity with the safety standards as recognized by the

Commission; or

(b)

a Certificate of Conformity issued by a local conformity assessment body.

shall be valid for not less than one year and not exceeding three years from the date of the certificate.

Conformity, as the case may be, the manufacturer shall submit a new test report or Certificate of Conformity to the Commission in accordance with this regulation.

Certificate of Conformity under this regulation shall ensure that such test report or Certificate of Conformity has a validity period of not less than one year before the expiry date.

P.U. (A) 151 28

Submission of test report or

Certificate of

Conformity by importer.

97E.

(1)

Any importer issued with a

Certificate of

Registration under regulation 97C shall submit to the

Commission—

(a)

a test report as to the equipment’s conformity with the safety standards as recognized by the Commission; or

(b)

a Certificate of Conformity issued by a foreign conformity assessment body recognized by the

Commission under regulation 97A.

shall be valid for not less than one year and not exceeding three years from the date of the certificate.

Conformity, as the case may be, the importer shall submit a new test report or Certificate of Conformity to the Commission in accordance with this regulation.

P.U. (A) 151 29

Duties to keep technical files of equipment, etc.

97F. (1) A manufacturer or importer issued with a Certificate of Registration under regulation 97C shall keep all technical files of any equipment issued together with a test report or Certificate of Conformity, as the case may be, for not less than ten years after the last equipment has left the production line.

Conformity for not less than six years after the expiry of the validity of the Certificate of Conformity.”.

New regulations 101A, 101B and 101C

6.

Part III of the principal Regulations is amended under the heading of “Approval of Equipment” by inserting after regulation 101 the following regulations:

“Efficient use of electricity by equipment.

101A. (1) For the purpose of efficient use of electricity, prior to an application for a Certificate of Approval under regulation 97, any person who manufactures, imports, sells or offers for sale or lease any equipment under that regulation, shall ensure that such equipment meets the energy performance testing standards, the minimum energy performance standards and the efficiency ratings as set out in the

Fourth Schedule.

P.U. (A) 151 30

Energy performance testing report.

Submission for test and seizure for the purpose of efficient use of electricity.

101B. (1) An energy performance testing report under subregulation 101A(2) shall be submitted to the Commission, in a manner that may be determined by the Commission.

101C. (1) The Commission may, at any time, by notice in writing, require any person who manufactures, imports, sells or offers for sale or lease such equipment as referred to in regulation 101A, to deliver, within such period as may be specified in the notice, samples of the equipment for an examination and a test.

P.U. (A) 151 31

recall within the stipulated period, all the equipment from manufacturing, importing, selling or offering for sale or lease and where necessary, may seize and remove such equipment.

Amendment of regulation 102 7.

Regulation 102 of the principal Regulations is amended by substituting for the words “71, 75, 80, 84, 88 or 92” the words “71, 75, 80, 84, 88, 92, 97B or 97C”.

Amendment of regulation 103 8.

Subregulations 103(1) and (2) of the principal Regulations are amended by substituting for the words “71, 75, 80, 84, 88 or 92” the words “71, 75, 80, 84, 88, 92,

97B or 97C”.

Amendment of regulation 104 9.

Subregulation 104(1) of the principal Regulations is amended by substituting for the words “71, 75, 80, 84, 88 or 92” the words “71, 75, 80, 84, 88, 92, 97B or 97C”.

Amendment of regulation 105 10.

Subregulation 105(1) of the principal Regulations is amended by substituting for the words “71, 75, 80, 84, 88 or 92” the words “71, 75, 80, 84, 88, 92, 97B or 97C”.

New regulation 109A

11.

The principal Regulations are amended by inserting after regulation 109 the following regulation:

“Market surveillance.

109A. (1) The Commission may, from time to time, carry out market surveillance to determine if any equipment referred to in

P.U. (A) 151 32

regulation 97 is safe and is affixed with a label in accordance with regulation 98 or an efficiency rating label, or both, as the case may be.

Savings and transitional provision 12.

(1)

Any existing local conformity assessment body already in operation before the coming into operation of these Regulations, shall apply to be registered with the Commission within a period of six months from the date of coming into operation of these Regulations.

P.U. (A) 151 33

(3)

Any existing equipment which had been manufactured, imported, sold or offered for sale or lease before the coming into operation of these Regulations shall be required to comply with regulation 101A, within one year from the date of coming into operation of these Regulations.

Amendment of First Schedule 13.

The First Schedule of the principal Regulations is amended—

(a)

by inserting after Form U the following form:

“FORM U1

(Regulation 97B)

CERTIFICATE OF REGISTRATION AS CONFORMITY ASSESSMENT BODY

The Energy Commission hereby certifies in pursuance of section 4(l) of the

Electricity

Supply

Act 1990

that

…………………………………………………………………………………………………………………………

at ……………………………………………...........................................................…………………….............

has satisfied the requirements of the Act and the Regulations made thereunder.

The

Energy

Commission certifies that the above-mentioned

………………………………………………………… has been registered and this Certificate of

Registration shall be valid for a period of ……….. year(s) from the date of issue stated below.

Date of issue: …..............

Place: …......................

….........................…………….

Energy Commission

___________________________________________________________________________________________

* Not less than one year and not more than three years.”;

P.U. (A) 151 34

(b)

by inserting after Form V the following form:

“FORM V1

(regulation 97C)

CERTIFICATE OF REGISTRATION TO MANUFACTURE/ TO IMPORT*

The Energy Commission hereby certifies in pursuance of section 4(k) of the

Electricity

Supply

Act 1990

that

………………………………………………………………………………………………….................................

at ……………………………………………...........................................................…………………………….

has satisfied the requirements of the Act and the Regulations made thereunder.

The

Energy

Commission certifies that the above-mentioned

………………………………………………………… has been registered and this Certificate of

Registration shall be valid for a period of ………. years(s) from the date of issue stated below.

Date of issue: …..............

Place: …......................

….........................…………….

Energy Commission

___________________________________________________________________

* Delete wherever appropriate

** Not less than one year and not more than five years.”.

P.U. (A) 151 35

New Fourth Schedule 14.

The principal Regulations are amended by inserting after the Third Schedule the following new schedule:

“FOURTH SCHEDULE

(Subregulation 101A (1))

ENERGY PERFORMANCE TESTING STANDARDS, MINIMUM ENERGY PERFORMANCE

STANDARDS AND EFFICIENCY RATINGS FOR THE PURPOSE OF EFFICIENT USE OF

ELECTRICITY

Equipment

Type of

Equipment

Energy

Performance

Testing Standards

Minimum Energy

Performance

Standards (MEPS)

Efficiency Ratings

Refrigerator

MS IEC

62552:2011

(Household refrigerating appliances-Characteristic and test methods)

MEPS’s value = 2

Star

Star

Rating

Star Index

Value 5

+25%≤ Star

Index 4

+10%≤ Star

Inde

<+25%

3

-10%≤ Star

Index <+10%

2

-25%≤ Star

Index <-10%

1

-35%≤ Star

Index <-25%

P.U. (A) 151 36

Equipment

Type of

Equipment

Energy

Performance

Testing Standards

Minimum Energy

Performance

Standards (MEPS)

Efficiency Ratings

Air conditioner

Single split wall mounted air conditioner capacity up to 25, 000 Btu/h

MS ISO 5151:2004

(Non-ducted air conditioners and heat pumps:

Testing and rating for performance)

MEPS’s value = 2

Star

4.5kW:

Star

Rating

Star Index

Value 5

≥10.71 4 9.83 - 10.70 3 8.94 - 9.82 2 8.03 - 8.93 1 7.50 - 8.02

Star

Rating

Star Index

Value 5

≥11.94 4 11.16 -11.93 3 10.37 - 11.15 2 9.56 - 10.36 1 9.00- 9.55

Television

The type of television are of the following list and of size up to or equal to 70 inches:

(LCD)

Edition 2.0 2008-10 for power measurement at On Mode

62301:2006

for power measurement

MEPS’s value = 2

Star

Star

Rating

Star Index

Value 5

+20%≤ Star

Index 4

+10%≤ Star

Index <+20%

3

-10%≤ Star

Index <+10%

2

-20%≤ Star

Index <-10%

1

-30%≤ Star

Index <-20%

P.U. (A) 151 37

Equipment

Type of

Equipment

Energy

Performance

Testing Standards

Minimum Energy

Performance

Standards (MEPS)

Efficiency Ratings

at Standby

Mode

Domestic fan

MS 1220:2001

(performance and construction of electric circulating fans and regulators) second revision

MEPS’s value = 2

Star

Star

Rating

Star Index

Value 5

 3.00 4 2.74 – 2.99 3 2.66 – 2.73 2 2.58 – 2.65 1 2.50– 2.57

Star

Rating

Star Index

Value 5

 1.20 4 1.12 – 1.19 3 1.08 – 1.11 2 1.01 – 1.07 1 0.93 – 1.00

Lighting

(Self –ballasted lamps for general lighting services –

Performance requirements)

Fluorescent:

NIL

P.U. (A) 151 38

Equipment

Type of

Equipment

Energy

Performance

Testing Standards

Minimum Energy

Performance

Standards (MEPS)

Efficiency Ratings

(IESNA

Approved

Method for the electrical and photometric measurement of solid-state lighting products) for

LED lights

(P)

(Self-ballasted

LED-lamps for general lighting services-performance requirement)

Type

(W)

MEPS

(lm/W)

T8 18-30 70

31 85

T5

14 80

15 85

Type

MEPS

(lm/

W)

CFLi (Self ballasted)

< 9 W

55 9- 15 W

60 16-24 W

60

25 W

60

CFL (Non integrated lamps)

≤10 W

60 11-26 W

65

 27 W

85

LED Lamp 55

Incandescent

Lamp*

20

*The Minimum Energy Performance Standards (MEPS) value for incandescent lamp shall not apply for the following use:

(a)

components in electrical appliances;

(b)

medical and lab equipment;

P.U. (A) 151 39

(d)

safety and signaling;

(g)

cleanliness and health;

(h)

beauty treatment;

Made 2 May 2013

[KeTTHA: BP(R) 427/1-1 Klt.; PN(PU2) 486/VI]

DATO’ SRI PETER CHIN FAH KUI

Minister of Energy, Green Technology and Water