/akn/my/act/pua/2014/172
PERINTAH KASTAM (LARANGAN MENGENAI IMPORT) (PINDAAN) (NO. 2) 2014
The full official text, structured for quick navigation. Copy any provision or jump straight to a section.
- Type
- P.U. (A)
- Status
- In force
- Enacted
- 2014
- Sections
- 225
Quick answer
About this p.u. (a)
PERINTAH KASTAM (LARANGAN MENGENAI IMPORT) (PINDAAN) (NO. 2) 2014 is Malaysia P.U. (A), cited as P.U. (A) 172 2014, currently marked in force and first recorded in 2014.
Opening note
Preamble
- PADA menjalankan kuasa yang diberikan oleh subseksyen 31(1) Akta Kastam 1967 [Akta 235], Menteri membuat perintah yang berikut: Nama dan permulaan kuat kuasa
(1)
Perintah ini bolehlah dinamakan Perintah Kastam (Larangan Mengenai
Import) (Pindaan) (No. 2) 2014.
Seksyen 2
Perintah Kastam (Larangan Mengenai Import) 2012 [P.U. (A) 490/2012] dipinda dalam Bahagian II Jadual Keempat berhubung dengan butiran 1 dan 2, dengan menggantikan butir-butir yang berhubungan dengannya dengan butir-butir yang berikut:
(5)
Item
Description of Goods
Chapter/
Heading/
Subheading
Country
Manner of Import
“1.
Iron and steel products:
All countries
That the import is accompanied by a certificate of approval or a letter of exemption issued by or on behalf of the
Chief Executive of the
Construction
Industry
Development Board for the construction sector or SIRIM Bhd. for non-construction sector
(1)
Semi-finished products (for example blooms, billets or slabs), of iron or non-alloy steel
Seksyen 7207
11 000,
(2)
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
Seksyen 7208
10 000,
Seksyen 7208
26 000,
Seksyen 7208
37 000,
Seksyen 7208
52 000,
(3)
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled
(cold reduced) not clad, plated or coated:
Seksyen 7209
15 000,
Seksyen 7209
18 290,
Seksyen 7209
26 000,
Seksyen 7209
28 290,
(4)
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, plated or coated (excluding clad):
(a)
plated or coated with tin, of a thickness of less than 0.5 mm containing by weight less than 0.6% of carbon
Seksyen 7210
12 200
(b)
electrolytically plated or coated with zinc, containing by weight less than 0.6% of carbon 7210.30 210,
Seksyen 7210
30 290
(i)
corrugated, containing by weight less than 0.6% of carbon, of a thickness of 1.5 mm or less 7210.41 210
Seksyen 7210
49 290
P.U. (A) 172 5
(d)
plated or coated with aluminium-zinc alloys, containing by weight less than 0.6% of carbon 7210.61 310,
Seksyen 7210
61 390
(e)
painted, varnished or coated with plastic, containing by weight less than 0.6% of carbon 7210.70 210,
Seksyen 7210
70 290
(5)
Flat-rolled products of iron or non-alloy steel, of a width less than 600 mm, not clad, plated or coated:
(i)
rolled on four faces or in closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief:
(aa) of universal plates, containing by weight less than 0.6%
of carbon 7211.13 000
(bb) of hoop and strip, containing by weight less than 0.6%
of carbon 7211.13 000
P.U. (A) 172 6
(ii)
of a thickness of 4.75 mm or more
(other than in (i)
above)
containing by weight less than 0.6% of carbon, excluding corrugated sheet 7211.14 210,
Seksyen 7211
14 290
(iii)
of a thickness less than 4.75
mm
(other than in (i)
above) containing by weight less than 0.6%
of carbon, excluding corrugated sheet 7211.19 210,
Seksyen 7211
19 290
(b)
not further worked than cold-rolled
(cold-reduced), containing by weight less than 0.6% of carbon 7211.23 100,
Seksyen 7211
23 300,
(c)
not further worked than cold-rolled
(cold-reduced), containing by weight 0.6% or more of carbon 7211.29 200
(6)
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, plated or coated (excluding clad):
(a)
electrolytically plated or coated with zinc, containing by weight less than 0.6% of carbon 7212.20 210,
Seksyen 7212
20 291,
(b)
plated or coated with zinc (other than in (a)
above)
containing by weight less than 0.6% of carbon 7212.30 210,
Seksyen 7212
30 291,
(c)
painted, varnished or coated with plastic, containing by weight less than 0.6% of carbon 7212.40 210,
Seksyen 7212
40 291,
(d)
plated or coated (other than with zinc, tin, painted, varnished or coated with plastic), containing by weight less than 0.6% of carbon 7212.50 210,
Seksyen 7212
50 291,
(7)
Bars and rods, hot-rolled in irregularly wound coils, of iron or non-alloy steel 72.13
(8)
Bars and rods of iron or non-alloy steel, other than in irregularly wound coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:
Seksyen 7214
10 290
Seksyen 7214
10 910
P.U. (A) 172 8
(b)
containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling, of circular cross-sections
Seksyen 7214
20 210,
(c)
of free-cutting steel, other than in (a) and (b)
above of circular cross-sections
Seksyen 7214
30 100
Seksyen 7214
99 210,
(9)
Bars and rods of iron or non-alloy steel, cold-formed or cold-finished, other than in irregularly wound coils, of a circular cross-sections 7215.10 100,
Seksyen 7215
50 210,
(10)
Angles, shapes and sections of iron or non-alloy steel, hot-rolled, hot-drawn or extruded:
(a)
U, I or H section, not further worked, of a height of less than 80 mm 7216.10 000
Seksyen 7216
21 000
Seksyen 7216
33 900
(d)
L or T section, not further worked, of a height of 80 mm or more 7216.40 100,
Seksyen 7216
40 200
(e)
angles, shapes and sections, other than U, I,
H, L, T sections, not further worked:
(i)
angles, other than slotted angles, containing by weight less than 0.6% of carbon 7216.50 100
(11)
Angles, shapes and sections, of iron or non-alloy steel, not further worked than cold-formed or cold-finished:
Seksyen 7216
69 100,
Seksyen 7217
10 000,
(a)
of circular cross-sections, not further worked than cold-formed, cold-finished 7222.20 100
(b)
of circular cross-sections, other than not further worked, whether or not hot-rolled, hot-drawn or extruded or cold-formed or cold-finished 7222.30 100
(16)
Hollow drills bars and rods of non-alloy, stainless steel or other alloy steel
Seksyen 7228
80
(18)
(a)
Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements 7301.10 000
Seksyen 7301
20 000
(19)
Rails or sleepers (cross-ties)
for railways or tramway track, of iron or steel 7302.10 000,
Seksyen 7302
90 100
(21)
Tubes, pipes and hollow profiles, seamless, of iron
(other than cast iron) or steel:
Seksyen 7304
19 000
(b)
casing, tubing and drill pipe, of the kind used in drilling for oil or gas 7304.22 000,
7304,23 000,
Seksyen 7304
24 000,
(c)
of circular cross-sections, of iron or non-alloy steel, other than in (a) and (b)
above 7304.31 100,
Seksyen 7304
31 900,
(d)
of circular cross-sections, of stainless steel, other than in (a) and (b) above
Seksyen 7304
41 100,
(e)
of circular cross-sections, of alloy steel (other than stainless steel), other than in (a) and (b) above 7304.51 100,
Seksyen 7304
51 900,
(f)
of non-circular cross-sections, including hollow profiles, other than in (a) and (b) above 7304.90 100,
Seksyen 7304
90 900
(22)
Welded, riveted or similarly closed tubes and pipes, having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel 7305.11 000,
Seksyen 7305
12 000,
(23)
Welded, riveted, open seam or similarly closed tubes, pipes and hollow profiles (other than having circular cross-sections, the external diameter of which exceeds 406.4 mm), of iron or steel:
Seksyen 7306
19 000
(b)
welded casing and tubing, of the kind used in drilling for oil or gas, of stainless steel
P.U. (A) 172 13
(d)
welded, of circular cross-sections, of stainless steel, other than in (a) and (b) above 7306.40 000
(e)
welded, of circular cross-sections, of alloy steel
(other than stainless steel), other than in (a) and (b) above 7306.50 000
(f)
welded, of non-circular cross-sections, other than in (a) and (b) above 7306.61 000,
Seksyen 7306
69 000
(g)
riveted, open seam or similarly closed, including hollow profile, other than in (a) to (f)
above
Seksyen 7306
90 000
(24)
Structures
(excluding prefabricated buildings of heading 94.06) and parts of structures
(for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel;
plates, rods, angles, shapes, sections, tubes, and the like, prepared for use in structures, of iron or steel:
P.U. (A) 172 14
(e)
Corrugated and curved galvanized plates or sheets prepared for use in conduits, culverts or tunnels 7308.90 200
(g)
Structures
(excluding prefabricated buildings of heading 94.06) and parts of structures or prepared for use in structures, other than in
(25)
Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated 7312.10 000,
Seksyen 7312
90 000
(26)
Grill, netting and fencing, of iron or steel wire, welded at the intersection:
(a)
with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more
Seksyen 7314
20 000
P.U. (A) 172 15
Seksyen 7314
39 000
(c)
Cloth other than woven, grill, netting and fencing
(other than in (a) and (b)
above), whether or not plated or coated with other material
Seksyen 7314
41 000,
(27)
Manhole covers, gratings and frames thereof of cast iron or steel 7325.10 100,
Seksyen 7325
99 100
Seksyen 7326
90 500
Seksyen 2
Aluminium products:
All countries
That the import is accompanied by a certificate of approval or a letter of exemption issued by or on behalf of the
Chief Executive of the
Construction
Industry
Development Board for the construction sector or SIRIM Bhd. for non-construction sector”.
(1)
Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm, whether or not alloyed 7606.11 000,
Seksyen 7606
12 000,
Seksyen 7607
19 000
P.U. (A) 172 16
Dibuat 23 Jun 2014
[Sulit KE.HT(96)669/15-36 Klt. 18 SK. 4; Perb. 0.9060/18Jld.31(SK.4);
PN(PU2)338C/XXI]
DATO’ SERI AHMAD HUSNI MOHAMAD HANADZLAH
Menteri Kewangan Kedua
P.U. (A) 172 17
CUSTOMS ACT 1967
CUSTOMS (PROHIBITION OF IMPORTS) (AMENDMENT) (NO. 2) ORDER 2014
Opening note
Preamble
- IN exercise of the powers conferred by subsection 31(1) of the Customs Act 1967 [Act 235], the Minister makes the following order: Citation and commencement 1.
(1)
This order may be cited as the Customs (Prohibition of Imports)
(Amendment) (No. 2) Order 2014.
(2)
This Order comes into operation on 1 July 2014.
Amendment of Fourth Schedule 2.
The Customs (Prohibition of Imports) Order 2012 [P.U. (A) 490/2012] is amended in Part II of the Fourth Schedule in relation to item 1 and 2, by substituting for the particulars relating to it the following particulars:
(5)
Item
Description of Goods
Chapter/
Heading/
Subheading
Country
Manner of Import
“1.
Iron and steel products:
All countries
That the import is accompanied by a certificate of approval or a letter of exemption issued by or on behalf of the
Chief Executive of the
Construction
Industry
Development Board for the construction sector or SIRIM Bhd. for non-construction sector
“(1) Semi-finished products (for example blooms, billets or slabs), of iron or non-alloy steel
Seksyen 7207
11 000,
(2)
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated:
Seksyen 7208
10 000,
Seksyen 7208
26 000,
Seksyen 7208
37 000,
Seksyen 7208
52 000,
(3)
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, cold-rolled
(cold reduced) not clad, plated or coated:
Seksyen 7209
15 000,
Seksyen 7209
18 290,
Seksyen 7209
26 000,
Seksyen 7209
28 290,
(4)
Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, plated or coated (excluding clad):
(a)
plated or coated with tin, of a thickness of less than 0.5 mm containing by weight less than 0.6% of carbon
Seksyen 7210
12 200
(b)
electrolytically plated or coated with zinc, containing by weight less than 0.6% of carbon 7210.30 210,
Seksyen 7210
30 290
(i)
corrugated, containing by weight less than 0.6% of carbon, of a thickness of 1.5 mm or less
Seksyen 7210
41 210
Seksyen 7210
49 210,
(d)
plated or coated with aluminium-zinc alloys, containing by weight less than 0.6% of carbon 7210.61 310,
Seksyen 7210
61 390
(e)
painted, varnished or coated with plastic, containing by weight less than 0.6% of carbon 7210.70 210,
Seksyen 7210
70 290
(5)
Flat-rolled products of iron or non-alloy steel, of a width less than 600 mm, not clad, plated or coated:
(i)
rolled on four faces or in closed box pass, of a width exceeding 150 mm and a thickness of not less than 4 mm, not in coils and without patterns in relief:
(aa) of universal plates, containing by weight less than 0.6%
of carbon 7211.13 000
(bb) of hoop and strip, containing by weight less than 0.6%
of carbon 7211.13 000
P.U. (A) 172 21
(ii)
of a thickness of 4.75 mm or more
(other than in (i)
above)
containing by weight less than 0.6% of carbon, excluding corrugated sheet
Seksyen 7211
14 210,
(iii)
of a thickness less than 4.75
mm
(other than in (i)
above) containing by weight less than 0.6%
of carbon, excluding corrugated sheet
Seksyen 7211
19 210,
(b)
not further worked than cold-rolled
(cold-reduced), containing by weight less than 0.6% of carbon 7211.23 100,
Seksyen 7211
23 300,
(c)
not further worked than cold-rolled
(cold-reduced), containing by weight 0.6% or more of carbon 7211.29 200
(6)
Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, plated or coated (excluding clad):
(a)
electrolytically plated or coated with zinc, containing by weight less than 0.6% of carbon 7212.20 210,
Seksyen 7212
20 291,
(b)
plated or coated with zinc (other than in (a)
above)
containing by weight less than 0.6% of carbon 7212.30 210,
Seksyen 7212
30 291,
(c)
painted, varnished or coated with plastic, containing by weight less than 0.6% of carbon 7212.40 210,
Seksyen 7212
40 291,
(d)
plated or coated (other than with zinc, tin, painted, varnished or coated with plastic), containing by weight less than 0.6% of carbon 7212.50 210,
Seksyen 7212
50 291,
(7)
Bars and rods, hot-rolled in irregularly wound coils, of iron or non-alloy steel 72.13
(8)
Bars and rods of iron or non-alloy steel, other than in irregularly wound coils, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, but including those twisted after rolling:
Seksyen 7214
10 290
Seksyen 7214
10 910
P.U. (A) 172 23
(b)
containing indentations, ribs, grooves or other deformations produced during the rolling process or twisted after rolling, of circular cross-sections
Seksyen 7214
20 210,
(c)
of free-cutting steel, other than in (a) and (b)
above of circular cross-sections
Seksyen 7214
30 100
Seksyen 7214
99 210,
(9)
Bars and rods of iron or non-alloy steel, cold-formed or cold-finished, other than in irregularly wound coils, of a circular cross-sections
Seksyen 7215
10 100,
(10)
Angles, shapes and sections of iron or non-alloy steel, hot-rolled, hot-drawn or extruded:
(a)
U, I or H section, not further worked, of a height of less than 80 mm 7216.10 000
Seksyen 7216
21 000
Seksyen 7216
33 900
Seksyen 7216
40 100,
(e)
angles, shapes and sections, other than U, I,
H, L, T sections, not further worked:
(i)
angles, other than slotted angles, containing by weight less than 0.6% of carbon 7216.50 100
Seksyen 7216
50 200
(11)
Angles, shapes and sections, of iron or non-alloy steel, not further worked than cold-formed or cold-finished:
Seksyen 7216
61 200
Seksyen 7216
69 100,
Seksyen 7217
10 000,
(a)
of circular cross-sections, not further worked than cold-formed, cold-finished 7222.20 100
(b)
of circular cross-sections, other than not further worked, whether or not hot-rolled, hot-drawn or extruded or cold-formed or cold-finished 7222.30 100
(16)
Hollow drills bars and rods of non-alloy, stainless steel or other alloy steel
Seksyen 7228
80
(18)
(a)
Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements
Seksyen 7301
10 000
Seksyen 7301
20 000
(19)
Rails or sleepers (cross-ties)
for railways or tramway track, of iron or steel
Seksyen 7302
10 000,
Seksyen 7303
00 000
(21)
Tubes, pipes and hollow profiles, seamless, of iron
(other than cast iron) or steel:
Seksyen 7304
11 000,
(b)
casing, tubing and drill pipe, of the kind used in drilling for oil or gas 7304.22 000,
7304,23 000,
Seksyen 7304
24 000,
(c)
of circular cross-sections, of iron or non-alloy steel, other than in (a) and (b)
above 7304.31 100,
Seksyen 7304
31 900,
(d)
of circular cross-sections, of stainless steel, other than in (a) and (b) above
Seksyen 7304
41 100,
(e)
of circular cross-sections, of alloy steel (other than stainless steel), other than in (a) and (b) above
Seksyen 7304
51 100,
(f)
of non-circular cross-sections, including hollow profiles, other than in (a) and (b) above 7304.90 100,
Seksyen 7304
90 900
(22)
Welded, riveted or similarly closed tubes and pipes, having circular cross-sections, the external diameter of which exceeds 406.4 mm, of iron or steel 7305.11 000,
Seksyen 7305
12 000,
(23)
Welded, riveted, open seam or similarly closed tubes, pipes and hollow profiles (other than having circular cross-sections, the external diameter of which exceeds 406.4 mm), of iron or steel:
Seksyen 7306
19 000
(b)
welded casing and tubing, of the kind used in drilling for oil or gas, of stainless steel
P.U. (A) 172 28
(d)
welded, of circular cross-sections, of stainless steel, other than in (a) and (b) above 7306.40 000
(e)
welded, of circular cross-sections, of alloy steel
(other than stainless steel), other than in (a) and (b) above 7306.50 000
(f)
welded, of non-circular cross-sections, other than in (a) and (b) above 7306.61 000,
Seksyen 7306
69 000
(g)
riveted, open seam or similarly closed, including hollow profile, other than in (a) to (f)
above
Seksyen 7306
90 000
(24)
Structures
(excluding prefabricated buildings of heading 94.06) and parts of structures
(for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel;
plates, rods, angles, shapes, sections, tubes, and the like, prepared for use in structures, of iron or steel:
P.U. (A) 172 29
(e)
Corrugated and curved galvanized plates or sheets prepared for use in conduits, culverts or tunnels 7308.90 200
(g)
Structures
(excluding prefabricated buildings of heading 94.06) and parts of structures or prepared for use in structures, other than in
Seksyen 7308
90 990
(25)
Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated 7312.10 000,
Seksyen 7312
90 000
(26)
Grill, netting and fencing, of iron or steel wire, welded at the intersection:
(a)
with a maximum cross-sectional dimension of 3 mm or more and having a mesh size of 100 cm2 or more
Seksyen 7314
20 000
P.U. (A) 172 30
Seksyen 7314
31 000,
(c)
Cloth other than woven, grill, netting and fencing
(other than in (a) and (b)
above), whether or not plated or coated with other material 7314.41 000,
Seksyen 7314
42 000,
(27)
Manhole covers, gratings and frames thereof of cast iron or steel 7325.10 100,
Seksyen 7325
99 100
Seksyen 7326
90 500
Seksyen 2
Aluminium products:
All countries
That the import is accompanied by a certificate of approval or a letter of exemption issued by or on behalf of the
Chief Executive of the
Construction
Industry
Development Board for the construction sector or SIRIM Bhd. for non-construction sector”.
(1)
Aluminium plates, sheets and strip, of a thickness exceeding 0.2 mm, whether or not alloyed 7606.11 000,
Seksyen 7606
12 000,
Seksyen 7607
11 000
Seksyen 7607
19 000
P.U. (A) 172 31
Made 23 June 2014
[Sulit KE.HT(96)669/15-36 Klt. 18 SK. 4; Perb. 0.9060/18Jld.31(SK.4);
PN(PU2)338C/XXI]
DATO’ SERI AHMAD HUSNI MOHAMAD HANADZLAH
Second Minister of Finance
Common questions
- What is PERINTAH KASTAM (LARANGAN MENGENAI IMPORT) (PINDAAN) (NO. 2) 2014?
- PERINTAH KASTAM (LARANGAN MENGENAI IMPORT) (PINDAAN) (NO. 2) 2014 is Malaysia P.U. (A), cited as P.U. (A) 172 2014, currently marked in force and first recorded in 2014.
- Is PERINTAH KASTAM (LARANGAN MENGENAI IMPORT) (PINDAAN) (NO. 2) 2014 still in force?
- Yes — PERINTAH KASTAM (LARANGAN MENGENAI IMPORT) (PINDAAN) (NO. 2) 2014 is currently in force.
- When did PERINTAH KASTAM (LARANGAN MENGENAI IMPORT) (PINDAAN) (NO. 2) 2014 take effect?
- PERINTAH KASTAM (LARANGAN MENGENAI IMPORT) (PINDAAN) (NO. 2) 2014 was first recorded in 2014.
- How many sections does PERINTAH KASTAM (LARANGAN MENGENAI IMPORT) (PINDAAN) (NO. 2) 2014 have?
- PERINTAH KASTAM (LARANGAN MENGENAI IMPORT) (PINDAAN) (NO. 2) 2014 contains 117 sections.
- Where can I read the official version of PERINTAH KASTAM (LARANGAN MENGENAI IMPORT) (PINDAAN) (NO. 2) 2014?
- The official text of PERINTAH KASTAM (LARANGAN MENGENAI IMPORT) (PINDAAN) (NO. 2) 2014 is published at lom.agc.gov.my.