PERINTAH KASTAM (DUTI PELINDUNG MUKTAMAD) 2015

Jadual Pertama, yang dieksport dari negara yang dinyatakan dalam ruang (3) Jadual

Pertama ke dalam Malaysia, pada kadar yang dinyatakan dalam ruang (4) Jadual

Pertama.

(2)

Barang-barang yang dinyatakan dalam ruang (1) dan (2) Jadual Pertama ialah barang-barang yang aplikasi, standard antarabangsa, gred dan tajuknya adalah sebagaimana yang dinyatakan dalam Jadual Kedua.

(3)

Duti pelindung muktamad yang dikenakan di bawah Perintah ini hendaklah bagi tempoh tiga tahun mulai 2 Julai 2015 hingga 1 Julai 2018 pada kadar seperti yang berikut:

Tempoh

Duti Pelindung Muktamad (%)

2 Julai 2015 – 1 Julai 2016 17.40 %

2 Julai 2016 – 1 Julai 2017 13.90%

2 Julai 2017 – 1 Julai 2018 10.40%

P.U. (A) 133 3

Pembayaran duti pelindung muktamad 3.

Duti pelindung muktamad yang kena dibayar di bawah Perintah ini hendaklah dibayar secara tunai.

Penjenisan barang-barang 4.

(1)

Penjenisan barang-barang yang dinyatakan dalam ruang (1) dan (2)

Jadual Pertama hendaklah mematuhi Rukun-Rukun Tafsiran dalam Perintah Duti

Kastam 2012 [P.U. (A) 275/2012].

(2)

Nombor kepala atau subkepala yang dinyatakan dalam ruang (1) Jadual

Pertama diperuntukkan bagi kemudahan rujukan dan tidak mempunyai kesan mengikat terhadap penjenisan barang-barang yang diperihalkan dalam ruang (2) Jadual Pertama.

Kesan terhadap duti import, dan cukai barang dan perkhidmatan 5.

Pengenaan duti pelindung muktamad di bawah Perintah ini tidaklah menjejaskan pengenaan dan pemungutan—

(a)

duti import di bawah Akta Kastam 1967 [Akta 235]; dan

(b)

cukai barang dan perkhidmatan di bawah Akta Cukai Barang dan

Perkhidmatan 2014 [Akta 762].

P.U. (A) 133 4

JADUAL PERTAMA

[Subperenggan 2(1)]

DUTI PELINDUNG MUKTAMAD

(1)

(2)

(3)

(4)

Nombor Kepala/

Subkepala mengikut

Kod H.S.

(Kod AHTN)

Perihalan

Barang-Barang

Negara

Kadar Duti (Peratusan

(%) daripada Nilai

Kos, Insurans dan

Tambang (KIT))

7208.51.000,

7208.52.000,

7225.40.000,

(7208.51.00 00,

7208.52.00 00,

7225.40.90 00)

Keluaran plat keluli gulungan panas besi atau keluli bukan aloi dan keluli aloi yang lain, yang mempunyai kelebaran 600

milimeter atau lebih, gulungan panas, tidak diliputi, disadur atau disalut, yang mempunyai ketebalan antara 6

milimeter hingga 75 milimeter

1. Australia

2. Kanada

3. Republik Czech

4. Republik

Persekutuan

Jerman

5. Perancis

6. Luxembourg

7. Greece

8. Hungary

9. Ireland

10. Itali

11. Jepun

12. Negara Belgium

13. Negara Denmark

14. Negara Norway

15. Negara Sepanyol

16. Negara Sweden

17. Negara Belanda

18. New Zealand

19. Republik Rakyat

China

17.40%

(2 Julai 2015 –

1 Julai 2016)

13.90%

(2 Julai 2016 –

1 Julai 2017)

10.40%

(2 Julai 2017 –

1 Julai 2018)

P.U. (A) 133 5

20. Republik

Portugal

21. Liechtenstein

22. Republik Austria

23. Republik

Bulgaria

24. Republik Cyprus

25. Republik Estonia

26. Republik Finland

27. Republik Iceland

28. Republik

Indonesia

29. Republik Korea

30. Republik Latvia

31. Republik

Lithuania

32. Republik Malta

33. Republik Poland

34. Republik

Singapura

35. Republik

Slovenia

36. Romania

37. Slovakia

38. Negara Israel

39. Switzerland

40. Ukraine

41. United Kingdom of Great Britain dan Ireland Utara

42. Amerika Syarikat

P.U. (A) 133 6

JADUAL KEDUA

[Subperenggan 2(2)]

BARANG-BARANG YANG DIKENAKAN DUTI PELINDUNG MUKTAMAD

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

Bagi struktur, pembinaan, fabrikasi dan jentera industri

EN 10025-2

Keluaran gulungan panas keluli struktur–

Bahagian 2: Syarat penghantaran teknikal bagi keluli struktur bukan aloi

BS EN 10025 -2

Keluaran gulungan panas keluli struktur–

Bahagian 2: Syarat penghantaran teknikal bagi keluli struktur bukan aloi

I.S EN 10025 -2

Keluaran gulungan panas keluli struktur–

Bahagian 2: Syarat penghantaran teknikal bagi keluli struktur bukan aloi

SN EN 10025 -2

Keluaran gulungan panas keluli struktur–

Bahagian 2: Syarat penghantaran teknikal bagi keluli struktur bukan aloi

ASTM A36/

A36M

Spesifikasi standard bagi keluli struktur karbon

ASTM A283/

A283M

Spesifikasi standard bagi plat keluli karbon berkekuatan tegangan rendah dan pertengahan

ASTM A572/

A572M

42, 50, 55, 60, 65

Spesifikasi standard bagi keluli struktur kolumbium-vanadium aloi rendah berkekuatan tinggi

P.U. (A) 133 7

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

ASTM A573/

A573M

58, 65, 70

Spesifikasi standard bagi plat keluli karbon struktur berketahanan diperbaik

A529/A529M

50, 55

Spesifikasi standard bagi keluli karbon-mangan berkekuatan tinggi berkualiti struktur

A569/A569M

Jenis A, B, C

Spesifikasi standard bagi keluli, karbon (maksimum 0.15, peratus), kepingan dan jalur gulungan panas dagangan

A570/A570M

40, 45, 50, 55

Spesifikasi standard bagi keluli struktur, jalur dan kepingan, karbon, gulungan panas

A635/A635M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

1023, 1524

Spesifikasi standard bagi keluli, jalur dan kepingan, gegelung berketebalan berat, karbon, gulungan panas

ASTM A656/

A656M

50, 60

Spesifikasi standard bagi keluli struktur gulungan panas berkekuatan tinggi, plat aloi rendah dengan kebolehbentukan diperbaik

A659/A659M

1015, 1016,

1017, 1018,

1020, 1021,

1023

Spesifikasi standard bagi keluli dagangan (CS), jalur dan kepingan, karbon (maksimum 0.16 hingga maksimum 0.25, peratus), gulungan panas

A715/A715M

50, 60, 70

Spesifikasi standard bagi jalur dan kepingan keluli, berkekuatan tinggi, aloi rendah, gulungan panas, dan kepingan keluli, gulungan sejuk, berkekuatan tinggi, aloi rendah, dengan kebolehbentukan diperbaik

P.U. (A) 133 8

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

ASTM A830/

A830M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

1022, 1023,

1025, 1026,

1524

Spesifikasi standard bagi plat, keluli karbon, kualiti struktur, diperlengkapi dengan keperluan komposisi kimia

A907/A907M

Spesifikasi standard bagi keluli, kepingan dan jalur, gegelung berketebalan berat, karbon, gulungan panas, kualiti struktur

ASME SA36/

SA 36M

Spesifikasi standard bagi keluli struktur karbon

ASME SA283/

SA283M

Spesifikasi standard bagi plat keluli karbon berkekuatan tegangan rendah dan pertengahan

SA529/SA529M

50, 55

Spesifikasi bagi keluli karbon-mangan berkekuatan tinggi berkualiti struktur

SA569/SA569M

Jenis A, B, C

Spesifikasi standard bagi keluli, karbon (maksimum 0.15, peratus), kepingan gulungan panas dan jalur dagangan

SA570/SA570M

40, 45, 50, 55

Spesifikasi standard bagi keluli struktur, kepingan dan jalur, karbon, gulungan panas

SA572/SA572M

42, 50, 55, 60, 65

Spesifikasi standard bagi keluli struktur kolumbium-vanadium aloi rendah berkekuatan tinggi

P.U. (A) 133 9

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

SA573/SA573M

58, 65, 70

Spesifikasi standard bagi plat keluli karbon struktur berketahanan diperbaik

SA635/SA635M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

1023, 1524

Spesifikasi standard bagi keluli, kepingan dan jalur, gegelung berketebalan berat, karbon, gulungan panas

ASME SA656/

SA656M

50, 60

Spesifikasi standard bagi keluli struktur gulungan panas berkekuatan tinggi, plat aloi rendah dengan kebolehbentukan diperbaik

SA659/SA659M

1015, 1016,

1017, 1018,

1020, 1021,

1023

Spesifikasi standard bagi keluli dagangan (CS), kepingan dan jalur, karbon (maksimum 0.16

hingga maksimum 0.25, peratus), gulungan panas

SA715/SA715M

50, 60, 70

Spesifikasi standard bagi kepingan dan jalur keluli, berkekuatan tinggi, aloi rendah, gulungan panas, dan kepingan keluli, gulungan sejuk, berkekuatan tinggi, aloi rendah, dengan kebolehbentukan diperbaik

ASME SA830/

SA830M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

1022, 1023,

1025, 1026,

1524

Spesifikasi standard bagi plat, keluli karbon, kualiti struktur, diperlengkapi dengan keperluan komposisi kimia

P.U. (A) 133 10

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

SA907/SA907M

Spesifikasi standard bagi keluli, kepingan dan jalur, gegelung berketebalan berat, karbon, gulungan panas, kualiti struktur

AS/NZS 3678 250, 350

Keluli struktur – Plat gulungan panas, plat dan papak lantai

AS/NZS 1594

HA 1006,

HA 1010,

HA 1016

Keluaran lembaran keluli gulungan panas

CSA G40.21 230G,

Keluli kualiti struktur – Plat, kepingan, plat lantai, bentuk bar dan dikimpal

CSA G40.20 230G,

Keperluan am bagi keluli kualiti struktur digulung atau dikimpal

BS 4360 40A, 40B, 40C,

40D, 43A, 43B,

43C, 43D, 50A,

50B, 50C, 50D

Spesifikasi bagi keluli struktur boleh kimpal

JIS G 3101

SS330, SS400

SS490, SS540

Keluli digulung bagi Struktur

Am

JIS G 3111

SRB 330

SRB 380

SRB 480

Keluli karbon digulung semula

JIS G 3131

Plat, kepingan dan jalur keluli lembut gulungan panas

JIG G 3132

Jalur keluli karbon gulungan panas bagi paip dan tiub

P.U. (A) 133 11

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

JIS G 3106

Keluli digulung bagi struktur dikimpal

NBN EN 10025-2 S235JR, S235JO,

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

NEN EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

CSN EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

SFS EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

NF EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

DIN EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

P.U. (A) 133 12

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

UNI EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

NS EN10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

PN EN10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

UNE EN 10025-2 S235JR, S235JO,

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

SS EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

DIN 17100

RSt 37-2

St 37-3U

St 44-2

St 44-3U

St 52-3

St 52-3U

Keluli bagi tujuan struktur am

NFA 35-501

E 24-2

E 24-3

E 28-2

E 28-3

E 36-2

Spesifikasi standard adalah bagi plat keluli karbon berkekuatan tegangan rendah dan pertengahan

P.U. (A) 133 13

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

E 36-3

UNI 7070

Keluaran siap gulungan panas keluli asas tiada aloi dan kualiti. Seksyen, bar dagangan, lembaran lebar, plat, kepingan, jalur dan gegelung bagi tujuan kejuruteraan dan struktur

NBN 21-101

AE 235B

AE 235C

AE 295B

AE 295C

AE 355B

AE 355C

Standard bagi keluli struktur

MNC 810E

SS13.11.00

SS13.12.00

SS14.12.00

SS21.32.01

SS21.34.01

Standard bagi keluli struktur

IS

IS226

Fe 410-S

IS 2062

Fe 410 WA

IS961

FE570 HT

Keluli bagi tujuan struktur am

ISO 630

Keluli struktur – plat, lembaran lebar, bar, seksyen dan profil

ISO 4995

HR235, HR275

dan HR355;

kelas B dan D

Kepingan keluli gulungan panas berkualiti struktur

GB 700

Q195, Q215,

Q235, Q255,

Q275

Keluli struktur karbon

P.U. (A) 133 14

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

GB 711 08

Plat keluli struktur dan jalur lebar karbon kualiti gulungan panas

MS 1768

Jalur keluli karbon gulungan panas bagi paip dan tiub

MS 1705

Jalur keluli karbon dan kepingan gulungan panas berkualiti komersial dan lukisan

MS EN 10025-2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

TIS 1499-2541

Gegelung keluli karbon, jalur, plat dan kepingan gulungan panas bagi struktur dikimpal

TIS 1735-2542

Gegelung keluli karbon dan jalur gulungan panas bagi paip dan tiub

KS D 3503

SS330

SS400

SS490

SS540

Keluli digulung bagi struktur am

KS D 3515

Keluli digulung bagi struktur dikimpal

P.U. (A) 133 15

Aplikasi

Standard

Antarabangsa

Gred

Tajuk

GOST 16523

08ps,

10ps,

10,

15ps,

15,

20ps,

20,

St1ps,

St2ps,

St1sp,

St2sp,

St3ps,

St3sp

Kepingan keluli aplikasi am kualiti karbon dan kualiti lazim gulungan panas

GOST 14637

St2ps,

St2sp,

St3sp,

St3ps,

St3Gps,

St3Gsp

Plat keluli karbon kualiti lazim

ONORM M1316

Rst360B

Keluli struktur kualiti bukan aloi

ONORM EN

10025 -2

S355J2,S355K2

Keluaran gulungan panas keluli struktur – Bahagian 2:

Syarat penghantaran teknikal bagi keluli struktur bukan aloi

P.U. (A) 133 16

Dibuat 26 Jun 2015

[0.9060/18(SJ.25); PN(PU2)647/IV]

DATO’ SERI HAJI AHMAD HUSNI BIN MOHAMAD HANADZLAH

Menteri Kewangan Kedua

[Akan dibentangkan di Dewan Rakyat menurut subseksyen 11(2) Akta Kastam 1967]

P.U. (A) 133 17

SAFEGUARDS ACT 2006 AND CUSTOMS ACT 1967

CUSTOMS (DEFINITIVE SAFEGUARDS DUTIES) ORDER 2015

IN exercise of the powers conferred by subsection 23(3)

of the

Safeguards Act 2006 [Act 657] and subsection 11(1) of the Customs Act 1967 [Act 235], the

Minister makes the following order:

Citation and commencement 1.

(1)

This order may be cited as the Customs (Definitive Safeguards Duties)

Order 2015.

(2)

This Order has effect for the period from 2 July 2015 to 1 July 2018.

Definitive safeguards duties 2.

(1)

Definitive safeguards duties shall be levied on and paid by the importers in respect of goods specified in columns (1) and (2) of the First Schedule, exported from the countries specified in column (3) of the First Schedule into Malaysia, at the rates specified in column (4) of the First Schedule.

(2)

The goods specified in columns (1) and (2) of the First Schedule are goods which applications, international standards, grades and titles are as specified in the

Second Schedule.

(3)

Definitive safeguards duties imposed under this Order shall be for a period of three years from 2 July 2015 until 1 July 2018 at the following rates:

Period

Definitive Safeguards Duties (%)

2 July 2015 – 1 July 2016 17.40 %

2 July 2016 – 1 July 2017 13.90%

2 July 2017 – 1 July 2018 10.40%

P.U. (A) 133 18

Payment of definitive safeguards duties 3.

The definitive safeguards duties payable under this Order shall be paid in cash.

Classification of goods 4.

(1)

The classification of goods specified in columns (1) and (2) of the First

Schedule shall comply with the Rules of Interpretation in the Customs Duties

Order 2012 [P.U. (A) 275/2012].

(2)

The heading or subheading numbers specified in column (1) of the First

Schedule is provided for ease of reference and has no binding effect on the classification of goods described in column (2) of the First Schedule.

Effects on import duties, and goods and services tax 5.

The imposition of the definitive safeguards duties under this Order is without prejudice to the imposition and collection of—

(a)

import duties under the Customs Act 1967 [Act 235]; and

(b)

goods and services tax under the

Goods and

Services

Tax

Act 2014 [Act 762].

P.U. (A) 133 19

FIRST SCHEDULE

[Subparagraph 2(1)]

DEFINITIVE SAFEGUARDS DUTIES

(1)

(2)

(3)

(4)

Heading/

Subheading

Numbers according to

H.S. Code

(AHTN Code)

Description of Goods

Countries

Rate of Duties

(Percentage (%) of the Cost, Insurance and Freight (CIF)

Value)

7208.51.000,

7208.52.000,

7225.40.000,

(7208.51.00 00,

7208.52.00 00,

7225.40.90 00)

Hot rolled steel plate products of iron or non-alloy steel and other alloy steel, of a width of 600 millimetres or more, hot rolled, not clad, plated or coated, of a thickness between 6 millimetres to 75 millimetres

1.

Australia

2. Canada

3. Czech Republic

4. Federal Republic of Germany

5. France

6. Luxembourg

7. Greece

8. Hungary

9. Ireland

10. Italy

11. Japan

12. Kingdom of

Belgium

13. Kingdom of

Denmark

14. Kingdom of

Norway

15. Kingdom of Spain

16. Kingdom of

Sweden

17.40%

(2 July 2015 –

1 July 2016)

13.90%

(2 July 2016 –

1 July 2017)

10.40%

(2 July 2017 –

1 July 2018)

P.U. (A) 133 20

17. Kingdom of the

Netherlands

18. New Zealand

19. People's Republic of China

20. Portuguese

Republic

21. Liechtenstein

22. Republic of

Austria

23. Republic of

Bulgaria

24. Republic of

Cyprus

25. Republic of

Estonia

26. Republic of

Finland

27. Republic of

Iceland

28. Republic of

Indonesia

29. Republic of Korea

30. Republic of Latvia

31. Republic of

Lithuania

32. Republic of Malta

33. Republic of

Poland

34. Republic of

Singapore

35. Republic of

Slovenia

P.U. (A) 133 21

36. Romania

37. Slovakia

38. State of Israel

39. Switzerland

40. Ukraine

41. United Kingdom of Great Britain and Northern

Ireland

42. United States of

America

P.U. (A) 133 22

SECOND SCHEDULE

[Subparagraph 2(2)]

GOODS WHICH ARE IMPOSED WITH DEFINITIVE SAFEGUARDS DUTIES

Applications

International

Standards

Grades

Titles

For structural, construction, fabrication and industry machinery

EN 10025 -2

Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels

BS EN 10025 -2

Hot rolled products of structural steels – Part 2 : Technical delivery conditions for non-alloy structural steels

I.S EN 10025 -2

Hot rolled products of structural steels – Part 2 : Technical delivery conditions for non-alloy structural steels

SN EN 10025 -2

Hot rolled products of structural steels – Part 2 : Technical delivery conditions for non-alloy structural steels

ASTM A36/

A36M

Standard specifications for carbon structural steel

ASTM A283/

A283M

Standard specifications for low and intermediate tensile strength carbon steel plates

ASTM A572/

A572M

42, 50, 55, 60, 65 Standard specifications for high-strength low-alloy-columbium-vanadium structural steel

ASTM A573/

A573M

58, 65, 70

Standard specifications for structural carbon steel plates of improved toughness

P.U. (A) 133 23

Applications

International

Standards

Grades

Titles

A529/A529M

50, 55

Standard specification for high-strength carbon-manganese steel of structural quality

A569/A569M

Type A, B, C

Standard specification for steel, carbon (0.15 maximum, percent), hot-rolled sheet and strip commercial

A570/A570M

40, 45, 50, 55

Standard specification for structural steel, sheet and strip, carbon, hot-rolled

A635/A635M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

1023, 1524

Standard specification for steel, sheet and strip, heavy-thickness coils, carbon, hot-rolled

ASTM A656/

A656M

50, 60

Standard specification for hot-rolled structural steel high strength, low-alloy plates with improved formability

A659/A659M

1015, 1016,

1017, 1018,

1020, 1021,

1023

Standard specification for commercial steel (CS), sheet and strip, carbon (0.16 maximum to 0.25 maximum, percent), hot-rolled

A715/A715M

50, 60, 70

Standard specification for steel sheet and strip, high-strength, low-alloy, hot-rolled, and steel sheet, cold-rolled, high-strength, low-alloy, with improved formability

ASTM A830/

A830M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

Standard specification for plates, carbon steel, structural quality, furnished to chemical composition requirements

P.U. (A) 133 24

Applications

International

Standards

Grades

Titles 1022, 1023,

1025, 1026,

1524

A907/A907M

Standard specification for steel, sheet and strip, heavy thickness coils, carbon, hot rolled, structural quality

ASME SA36/

SA 36M

Standard specification for carbon structural steel

ASME SA283/

SA283M

Standard specification for low and intermediate tensile strength carbon steel plates

SA529/SA529M

50, 55

Specification for high-strength carbon-manganese steel of structural quality

SA569/SA569M

Type A, B, C

Standard specification for steel, carbon (0.15 maximum, percent), hot-rolled sheet and strip commercial

SA570/SA570M

40, 45, 50, 55

Standard specification for structural steel, sheet and strip, carbon, hot-rolled

SA572/SA572M

42, 50, 55, 60, 65 Standard specification for high-strength low-alloy columbium-vanadium structural steel

SA573/SA573M

58, 65, 70

Standard specification for structural carbon steel plates of improved toughness

SA635/SA635M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

1023, 1524

Standard specification for steel, sheet and strip, heavy-thickness coils, carbon, hot-rolled

P.U. (A) 133 25

Applications

International

Standards

Grades

Titles

ASME SA656/

SA656M

50, 60

Standard specification for hot rolled structural steel high strength, low alloy plates with improved formability

SA659/SA659M

1015, 1016,

1017, 1018,

1020, 1021,

1023

Standard specification for commercial steel (CS), sheet and strip, carbon (0.16 maximum to 0.25 maximum, percent), hot-rolled

SA715/SA715M

50, 60, 70

Standard specification for steel sheet and strip, high-strength, low-alloy, hot-rolled, and steel sheet, cold-rolled, high-strength, low-alloy, with improved formability

ASME SA830/

SA830M

1006, 1008,

1009, 1010,

1012, 1015,

1016, 1017,

1018, 1019,

1020, 1021,

1022, 1023,

1025, 1026 1524

Standard specification for plates, carbon steel, structural quality, furnished to chemical composition requirements

SA907/SA907M

Standard specification for steel, sheet and strip, heavy thickness coils, carbon, hot-rolled, structural quality

AS/NZS 3678 250, 350

Structural steel – Hot-rolled plates, floor plates and slabs

AS/NZS 1594

HA 1006,

HA 1010,

HA 1016

Hot rolled steel flat products

CSA G40.21 230G,

Structural quality steel - Plates, sheet, floor plates, bars and welded shapes

P.U. (A) 133 26

Applications

International

Standards

Grades

Titles

CSA G40.20 230G,

General requirements for rolled or welded structural quality steel

BS 4360 40A, 40B, 40C,

40D, 43A, 43B,

43C, 43D, 50A,

50B, 50C, 50D

Specifications for weldable structural steels

JIS G 3101

SS330, SS400

SS490, SS540

Rolled steel for General

Structure

JIS G 3111

SRB 330

SRB 380

SRB 480

Rerolled carbon steel

JIS G 3131

Hot rolled mild steel plates, sheets and strip

JIG G 3132

Hot-rolled carbon steel strip for pipes and tubes

JIS G 3106

Rolled steels for welded structure

NBN EN 10025-2 S235JR, S235JO,

Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels

NEN EN 10025-2

Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-P.U. (A) 133 27

Applications

International

Standards

Grades

Titles alloy structural steels

CSN EN 10025-2

Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels

SFS EN 10025-2

Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels

NF EN 10025-2

Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels

DIN EN 10025-2

Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels

UNI EN 10025-2

Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels

NS EN10025-2

Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels

PN EN10025-2

Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels

P.U. (A) 133 28

Applications

International

Standards

Grades

Titles

UNE EN 10025-2

Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels

SS EN 10025-2

Hot rolled products of structural steels – Part 2: Technical delivery conditions for non-alloy structural steels

DIN 17100

RSt 37-2

St 37-3U

St 44-2

St 44-3U

St 52-3

St 52-3U

Steels for general structure purposes

NFA 35-501

E 24-2

E 24-3

E 28-2

E 28-3

E 36-2

E 36-3

Standard specification is for low and intermediate tensile strength carbon steel plates

UNI 7070

Hot rolled finished product of unalloyed basic and quality steel. Section, merchant bars, wide flats, plates, sheets, strips and coils for structural and engineering purposes.

NBN 21-101

AE 235B

AE 235C

AE 295B

AE 295C

AE 355B

AE 355C

Standard for structural steel

MNC 810E

SS13.11.00

SS13.12.00

SS14.12.00

SS21.32.01

SS21.34.01

Standard for structural steel

P.U. (A) 133 29

Applications

International

Standards

Grades

Titles

IS

IS226

Fe 410-S

IS 2062

Fe 410 WA

IS961

FE570 HT

Steel for general structural purposes

ISO 630

Structural steels – plates, wide flats, bars, sections and profiles

ISO 4995

HR235, HR275

and HR355;

classes B and D

Hot-rolled steel sheet of structural quality

GB 700

Q195, Q215,

Q235, Q255,

Q275

Carbon structural steels

GB 711 08

Hot-rolled quality carbon structural steel plates and wide strips

MS 1768

Hot-rolled carbon steel strip for pipes and tubes

MS 1705

Hot-rolled carbon steel strip and sheet of commercial and drawing qualities

MS EN 10025-2

Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels

TIS 1499-2541

Hot-rolled carbon steel coil, strip, plate and sheet for welded structure

P.U. (A) 133 30

Applications

International

Standards

Grades

Titles

TIS 1735-2542

Hot-rolled carbon steel coil and strip for pipes and tubes

KS D 3503

SS330

SS400

SS490

SS540

Rolled steels for general structures

KS D 3515

Rolled steels for welded structure

GOST 16523

08ps,

10ps,

10,

15ps,

15,

20ps,

20,

St1ps,

St2ps,

St1sp,

St2sp,

St3ps,

St3sp

Hot rolled carbon quality and common quality general application steel sheet

GOST 14637

St2ps,

St2sp,

St3sp,

Common quality carbon steel plate

P.U. (A) 133 31

Applications

International

Standards

Grades

Titles

St3ps,

St3Gps,

St3Gsp

ONORM M1316

Rst360B

Non alloy quality structural steel

ONORM EN

10025 -2

Hot rolled products of structural steels – Part 2 : Technical delivery conditions for non-alloy structural steels

Made 26 June 2015

[0.9060/18(SJ.25); PN(PU2)647/IV]

DATO’ SERI HAJI AHMAD HUSNI BIN MOHAMAD HANADZLAH

Second Minister of Finance

[To be laid before the Dewan Rakyat pursuant to subsection 11(2) of the Customs Act 1967]