Act of Parliament · Updated to 1 Aug 2016 · 6 parts
Factories and Machinery Act 1967
Feedback & supportSafety, health and welfare in factories, and registering machineryPart I
Preliminary
Official textFrom Laws of Malaysia Online, unchanged
This Act may be cited as the Factories and Machinery Act 1967.
(Omitted).
The Minister may by order suspend* the operation of the whole or any of the provisions of this Act in any State and may at any time thereafter remove the suspension.
In this Act, unless the context otherwise requires, “factory” means any premises or part of a premises where—
within the close or curtilage or precincts of the premises or part thereof persons are employed in manual labour in any process for or connected with or incidental to the making, altering,
*NOTE—Operation of this Act in Sabah and Sarawak suspended—see [P.U. (B) 6/1970]. Suspension removed in respect of Sabah and Sarawak w.e.f. 1 July 1980—see [P.U. (B) 321/1980].
8 Laws of Malaysia ACT 139
repairing, ornamenting, sorting, finishing, cleaning, washing, breaking, demolishing, constructing, reconstructing, fitting, refitting, adjusting or adapting of any article or part thereof; and
the said work is carried on by way of trade for the purposes of gain or incidentally to any business so carried on, and (whether or not they are factories by reason of the foregoing definition)
the expression factory also includes the following premises in which persons are employed in manual labour:
any yard or dry dock (including the precincts thereof) in which ships or vessels are constructed, reconstructed, repaired, refitted, finished or broken up;
any premises in which the business of washing or filling bottles or containers or packing articles is carried on incidentally to the purposes of any factory;
any premises in which the business of hooking, plaiting, lapping, making-up or packing of yarn or cloth is carried on;
any laundry carried on as ancillary to another business or incidentally to the purposes of any public institution;
any premises in which the construction, reconstruction, or repair of locomotives, vehicles or other plant for use for transport purposes is carried on ancillary to a transport undertaking or other industrial or commercial undertaking;
any premises in which printing by letter press, lithography, photogravure, or other similar process, or bookbinding is carried on by way of trade or for purposes of gain or incidentally to another business so carried on;
any premises in which the production of cinematograph films is carried on by way of trade or for purposes of gain;
any premises in which manual labour is employed and mechanical power is used in connection with the making or
Factory and Machinery 9
repair of any article of metal or wood incidentally to any business carried on by way of trade or for purposes of gain;
any premises used for the storage of gas in a gas-holder having a storage capacity of not less than one hundred and forty cubic metres;
any premises, place or space where any building operations or works of engineering construction are carried out; and
any premises belonging to or in the occupation of the Federal
Government or the Government of any State or of any local authority or other public authority which would be a factory within the meaning of this Act but for paragraph (b), but does not include—
any premises used for the purposes of housing locomotives or vehicles where only cleaning, washing, running repairs or minor adjustments are carried out; or
any premises where five or less persons carry on any work in which machinery is not used notwithstanding that the premises by virtue of would constitute a factory within the meaning of this section.
Any line or siding which is used in connection with and for the purposes of a factory, shall be deemed to be part of the factory.
Any pipeline used for transporting dangerous substances which may cause fire, explosion or adverse health effects to any person (other than petroleum or petroleum products) which is used in connection with and for the purposes of a factory, shall be deemed to be part of the factory.
For the purpose of subsection (3), “pipelines” means the physical facilities or any part of the physical facilities through which dangerous substances which may cause fire, explosion or adverse health effects to any person (other than petroleum or petroleum products) in the form of liquid or vapour or any combination of liquid or vapour are transported, and includes pipes, pumps, compressors, meters, regulators and fabricated assemblies.
10 Laws of Malaysia ACT 139
s 3Interpretation: general
In this Act unless the context otherwise requires—
“amusement device” means any contrivance or a combination of contrivances, or rides, equipment or plant or any other similar device which are designed or intended to entertain or amuse people and which can be installed repeatedly without loss of substance, whether temporarily or permanently, at fairs, amusement parks or other locations;
“amusement park” means a tract or area used principally as a location for amusement devices and structures;
“article” means any solid, liquid or gas or any combination thereof, and also includes electricity;
“bodily injury” includes injury to health;
“building operation” means the construction, structural alteration, repair or maintenance of a building (including repointing, redecoration and external cleaning of the structure), the demolition of a building, and the preparation for and the laying of the foundation of an intended building, but does not include any operation which is the work of engineering construction within the meaning of this Act;
“certificate of competency” means a certificate granted under this Act by the Chief Inspector certifying that the holder is duly qualified to be in charge of machinery to which the certificate of competency relates;
“certificate of fitness” means a certificate granted under this Act certifying that the machinery described therein has been inspected, and at the time of the inspection has satisfied the requirements of this Act and that it may be worked or operated;
“Chief Inspector”, “Deputy Chief Inspector”, “Senior Inspector” and
“Inspector” mean respectively the Chief Inspector of Factories and
Machinery, a Deputy Chief Inspector of Factories and Machinery, a Senior
Inspector of Factories and Machinery and an Inspector of Factories and
Machinery appointed under section 4;
Factory and Machinery 11
“dangerous occurrence” means any occurrence in any of the classes listed in the First Schedule;
“dredge” means any floating structure used for the winning of tin ore, for the dredging of rivers and waterways or for purposes of land reclamation, and includes the bucket type dredge and the cutter-suction type dredge;
“dredgemaster” means a person who holds a dredgemaster’s certificate of competency issued under section 30;
“driven machinery” includes any machine or appliance where motion is received from transmission machinery;
“driver” means a person who holds an engine driver’s certificate of competency issued under section 30;
“engineer” means a person who holds an engineer’s certificate of competency issued under section 30;
“fair” means an enterprise principally devoted to the exhibition of products of agriculture or industry and at or in connection with which amusement devices and temporary structures are provided;
“fence” means any form of protective device designed to prevent serious bodily injury or bodily injury to any person and includes a guard and a guard rail;
“fired pressure vessel” means an enclosed vessel under pressure greater than atmospheric pressure which is subjected to direct firing, but does not include a steam boiler;
“fume” includes gas or vapour;
“gas cylinder” means a steel cylinder or bottle used for the storage and transport of compressed, dissolved or liquefied gases;
“gas holder” means any bell-shaped structure floating in a tank of water, in which gas is collected for distribution;
12 Laws of Malaysia ACT 139
“guard” means a suitably supported substantially constructed solid or mesh enclosure (either complete or partial) of metal or other material;
“guard rail” means a railing of metal or wood, supported by stanchions, of strength and good construction;
“hoist” means a lifting machine other than a lift whether worked by mechanical power or not with a carriage, platform or cage the direction of movement of which is restricted by a guide or guides;
“hoisting machine” means any equipment for lifting, raising or lowering load such as a lift, escalator, hoist, crane, winch, dragline, piling machine, aerial cableway, funicular railway, access platform, dumbwaiter, vertical conveyor lifter and mechanical loading ramp, and includes transporter, walkalator and other similar equipment, but does not include manual hoist and materials handling equipment;
“hoisting tackle” includes a chain or rope sling, ring, link, hook, shackle, swivel, eyebolt, chain, rope, pulley block and chain block;
“Inspector” includes the Chief Inspector, Deputy Chief Inspector and a
Senior Inspector appointed under section 4;
“licensed person” means any person licensed under section 7D of the Act;
“lift” means an appliance designed to transport passengers or goods or both between two or more levels in a vertical direction by means of a guided lift car or platform in which the motion of the lift car or platform is obtained through an electric motor coupled to the lifting element, and includes the machinery, suspension ropes, hydraulic rams, supports and enclosures required in connection therewith, and includes electric or hydraulic lifts and paternoster or continuous lift, but does not include mine cages as used in underground mines;
“machinery” includes steam boilers, unfired pressure vessels, fired pressure vessels, pipelines, prime movers, gas cylinders, gas holders, hoisting machines and tackle, transmission machinery, driven machinery, materials handling equipment, amusement device or any other similar machinery and any equipment for the casting, cutting, welding or electro-deposition of
Factory and Machinery 13
materials and for the spraying by means of compressed gas or air of materials or other materials, but does not include—
any machinery used for the propulsion of vehicles other than steam boilers or steam engines;
any machinery driven by manual power other than hoisting machines;
any machinery used solely for private and domestic purposes;
or
office machines;
“maintain” means maintain in an efficient state, in efficient working order and in good repair;
“manufacturing or commercial secret” means highly sensitive information relating to—
any manufacturing process;
any product , raw material , by-product formulation;
any idea of duplication or cloning of product; or
any technical information on operating system, and that the information has been declared as manufacturing or commercial secret in writing by the occupier or owner;
“materials handling equipment” means any power-driven equipment for handling materials, and includes forklift, conveyor, stacker, excavator, tractor, dumper or bulldozer but does not include hoisting machine;
“nuisance” means any act, omission or thing occasioning or likely to occasion injury, annoyance, offence, harm, danger or damage to the sense of sight, smell or hearing, or which is or is likely to be injurious or dangerous to health or property;
14 Laws of Malaysia ACT 139
“occupier” in relation to a factory means a person who occupies or uses any premises as a factory;
“office machines” means machines commonly used in the exercise of clerical and associated functions and includes electrical typewriters, calculating and accounting machines and computers;
“operator” includes any person employed on any service involving the management or operation of, or attendance on, any machinery;
“owner” means the person for the time being receiving the rents or profits of the premises or machinery in connection with which the word is used, whether on his own account or as an agent or trustee for any other person or who would so receive the same if the premises or machinery were leased;
“Panel” means the Panel of Examiners appointed under section 30;
“petroleum” means any mineral oil or relative hydrocarbon and natural gas existing in its natural condition and casinghead petroleum spirit, and includes—
bituminous shales and other stratified deposits from which oil can be extracted; and
petroleum products;
“petroleum products” means material derived from petroleum, natural gas or asphalt deposits, and includes gasoline, kerosene, diesel fuel, fuel oil, lubricating oil, liquefied petroleum gas, wax, grease, butane, benzene, propane and any like flammable and combustible liquids;
“premises” includes any building, place, or floating structure;
“prime mover” means every engine, motor or other appliance which provides mechanical energy derived from air, steam, water, wind, electricity, the combustion of fuel or other source;
“prescribed” means prescribed by the Minister by regulation made under this Act;
Factory and Machinery 15
“sanitary conveniences” includes urinals, water-closets, earth-closets, ashpits and any similar convenience;
“serious bodily injury” means any injury listed in the Second Schedule;
“steam boiler” means any closed vessel in which for any purpose steam is generated under pressure greater than atmospheric pressure, and includes any economiser used to heat water being fed to the vessel, and any superheater used for heating steam, and any pipes and fittings connected thereto;
“special scheme of inspection” means an inspection system approved by the Chief Inspector pertaining to periodical inspections for certain classes of machinery and its auxiliary;
“transmission machinery” means every shaft, wheel, drum, pulley, system of fast and loose pulleys, coupling, clutch, driving belt or other device by which the motion of a prime mover or other source of mechanical power is transmitted to or received by any machine or appliance;
“underground room” means any room which, or any part of which is so situate that at least half its height measured from the floor to the ceiling, is below the surface of the ground adjoining the room;
“unfired pressure vessel” means any enclosed vessel under pressure greater than atmospheric pressure by any gas or mixture or combination of gases and includes any vessel under pressure of steam external to the steam boiler and any vessel which is under pressure of a liquid or gas or both, and any vessel subject internally to a pressure less than atmospheric pressure but does not include gas cylinders;
“work of engineering construction” means the construction, extension, installation, repair, maintenance, renewal, removal, renovation, alteration, dismantling, or demolition of—
any erection, edifice, structure, caisson, mast, tower, pylon, wall, fence or chimney, whether constructed wholly or partly above or below ground level;
16 Laws of Malaysia ACT 139
any road works, dock, harbour works, railway, siding, cableway, tramway line, inland navigation, air field or aerodrome;
any drainage, sewer, sewage works, irrigation, river control works, sea defence work or earth retaining structure;
any electrical, mechanical, water, gas, petrochemical or telecommunication works; or
any bridge, viaduct, dam, reservoir, lagoon, earthworks, pipeline, sewer, aqueduct, culvert, drive, shaft, tunnel or reclamation works, and includes—
any formwork, falsework, scaffold or any works which form an integral part of, or are preparatory to or temporary to, the works described in paragraphs (a) to (e);
site clearance, soil investigation and improvement, earth-moving, excavation, laying of foundation, site restoration and landscaping; and
such other works as may be specified by the Minister.
“working floor area” means the area covered by the premises and all the precincts, curtilage and yard of the factory as derived from the plan or sketch submitted at the time of notification, including all floor areas above and below ground level:
Provided that catwalks, ladders, and other such means of access to machinery shall not be considered when calculating working floor area;
“young person” means any person who has not completed his sixteenth year of age.
Factory and Machinery 17
There shall be appointed an officer to be styled the Chief Inspector of Factories and Machinery and such number of Deputy Chief Inspectors of
Factories and Machinery, Senior Inspectors of Factories and Machinery and
Machinery and Inspectors of Factories and Machinery as may be necessary for the purposes of this Act.
There shall be appointed such other officers as may be expedient for the performance of such duties as may be prescribed under this Act.
All Deputy Chief Inspectors, Senior Inspectors and Inspectors and all officers appointed under subsection 4 (2) shall be subject to the direction and supervision of the Chief Inspector.
A Senior Inspector shall have and may exercise all powers vested by this Act in an Inspector and the Chief Inspector and a Deputy Chief Inspector shall have and may exercise all such powers vested in a Senior Inspector or an Inspector.
The Chief Inspector may in writing delegate any of the functions, powers or duties assigned to him under this Act to any Deputy Chief
Inspector, Senior Inspector or Inspector, subject to such terms and conditions as he thinks fit.
A delegation under this section shall not preclude the Chief Inspector himself from performing or exercising at any time any of the functions, powers or duties so delegated.
All officers appointed under section 4 shall be deemed to be public servants within the meaning of the Penal Code [Act 574].
A licensed person, all his servants and agents and other persons employed by him shall, while discharging their duties as a licensed person
18 Laws of Malaysia ACT 139
and such servants, agents and employees, be deemed to be public servants within the meaning of the Penal Code.
An Inspector shall, for carrying the purposes of this Act into effect, have powers to do all or any of the following:
to enter, inspect and examine, by day or by night any factory, and every part thereof when he has reasonable cause to believe that any work or process is being carried on therein, and to enter, inspect and examine by day, any place which he has reasonable cause to believe to be a factory and any part of any building of which a factory forms part and in which he has reasonable cause to believe that explosive or highly inflammable materials are stored or used and to exercise such powers as may be necessary to inspect and examine any machinery, plant, appliance or fitting therein;
to require the production of factory records, certificates, notices and documents kept in pursuance of this Act and to inspect, examine and copy any of them;
to make such examination and enquiry as may be necessary to ascertain whether the provisions of this Act are complied with, so far as regards a factory or any persons employed therein;
to require any person whom he finds in a factory to give such information as it is in his power to give as to who is the owner of the factory;
in the case of an Inspector who is a registered medical practitioner, to carry out such medical examination as may be necessary for the purpose of his duties under this Act;
to take samples of any material whether solid, liquid, gaseous or vaporous being discharged in or from a factory; and
Factory and Machinery 19
to render inoperative in accordance with this Act, any machinery which does not comply with this Act, by affixing a seal or by any other means which he may deem best suited to the purpose.
On being required by an Inspector, the occupier of every factory shall furnish the means necessary for entry, inspection, examination, inquiry, the taking of samples, or otherwise for the exercise of his powers under this Act in relation to that factory.
An Inspector seeking to enter any premises under the powers conferred upon him by subsection (1) shall produce on demand, an official identification card in such form as may be prescribed, and no person shall be obliged to admit to his premises any person purporting to be an Inspector except on production of such an identification card.
s 7AEntry into premises with a search warrant and the power of seizure
Where information is given on oath to a magistrate that there is reasonable cause for suspecting that there is in a factory or premises any article, thing, book, document, plant, substance, installation or part thereof which has been used to commit or is intended to be used to commit an offence under this Act or regulation made thereunder, he shall issue a warrant under his hand by virtue of which an Inspector named or referred to in the warrant may enter the factory or premises at any reasonable time by day or night, and search for and seize or seal the article, thing, book, document, plant, substance, installation or part thereof.
s 7BEntry into premises without a search warrant and the power of seizure
Where an Inspector is satisfied upon information received that he has reasonable grounds for believing that, by reason of delay in obtaining a search warrant, any article, thing, book, document, plant, substance, installation or part thereof in a factory or premises which has been used to commit or is intended to be used to commit an offence under this Act or any regulation made thereunder is likely to be removed or destroyed, he may enter the factory or premises without a warrant and seize or seal the article,
20 Laws of Malaysia ACT 139
thing, book, document, plant, substance, installation or part thereof found therein.
s 7CService of list of things seized
The Inspector seizing any article, thing, book, document, plant, substance, installation or part thereof under section 7A or 7B shall prepare a list of things seized and forthwith, deliver a copy of the list signed by him to the occupier, or his agent or servant present in the premises, and if the premises are unoccupied or if the occupier, or his agent or servant is absent the Inspector shall, wherever possible, post a list of the things seized on the premises and make a police report thereafter.
Notwithstanding any other provisions of this Act, the Minister shall have the power to grant a licence on such conditions as he may think fit to any person to perform any of the functions specified in this Act as the functions of a licensed person as it appears to him to be necessary.
The Minister may, make an order for the purpose of subsection (1)
and in particular but without prejudice to the generality of the foregoing, such order may—
prescribe the qualification and standards of competency of persons to be employed by a licensed person;
prescribe the powers of a person employed by a licensed person to carry out the functions of a licensed person;
prescribe the records to be kept by a licensed person;
prescribe the returns to be submitted by a licensed person to the
Chief Inspector at certain intervals;
regulate the inspection by the Chief Inspector of the premises of a licensed person and the records kept thereat;
Factory and Machinery 21
prescribe inspection standards for a licensed person to comply with; and
prescribe the functions or duties to be carried out by a licensed person.
The Minister may, by order published in the Gazette, authorize a licensed person to demand, prescribe, collect and retain charges, fees and levy in respect of the services provided by the licensed person.
An order made under subsection (3) shall specify—
the type of services in respect of which charges, fees or levy may be demanded, collected and retained; and
the duration of the authorization to demand, collect and retain the charges, fees or levy.
A licensed person authorized under subsection (3) shall—
maintain such account, books and records in respect of the payment and collection of charges, fees or levy as the Chief
Inspector may require;
furnish to the Chief Inspector such information, returns and accounts in respect of the payment and collection of charges, fees or levy as the Chief Inspector may require; and
permit the Chief Inspector or any other person authorized in writing by the Chief Inspector to have access to or examine or inspect any document, machinery or equipment maintained or used for the payment or collection of charges, fees or levy.
The authorization of a licensed person under subsection (3) shall not render the Federal Government liable to any person in respect of any injury, damage or loss occasioned by the failure of the licensed person to carry out his obligations under this Act in respect of which charges, fees or levy are demanded, collected and retained.
22 Laws of Malaysia ACT 139
If a licensed person contravenes any condition of the licence or any of the provisions of any order made under this section or any of the provisions of subsection (5) with which he is required to comply he shall be guilty of an offence and shall, on conviction, be liable to a fine not exceeding one hundred thousand ringgit or to imprisonment for a term not exceeding two years or to both.
Notwithstanding the licensing of a person under this section, the
Minister may give directions to the Chief Inspector to exercise any of the functions which under the terms of the licence are to be carried out by such person.
If the Chief Inspector is satisfied that a licensed person has breached any condition of the licence, the Chief Inspector may give a notice in writing to the licensed person requiring him to comply with the condition which he has breached and take all measures stipulated therein within the period stated in the notice.
If by the time the period stipulated in the notice expires the licensed person has failed to comply with the notice, the Chief Inspector shall present a report to the Minister on such failure.
If, after considering the report from the Chief Inspector, the Minister is satisfied that the breach is serious in nature or affects or may affect the safety and health of workers or members of the public and that the licensed person has failed or refused to take or has not taken all measures stipulated in the notice for the purpose of ensuring compliance with the condition which the licensed person has breached, the Minister may give the licensed person a notice stating that he proposes to revoke the licence given to such person and the notice shall also state—
the breach alleged against the licensed person and the actions or omissions that constitute the breach; and
the period (which must not be less than thirty days from the date of the notice) within which the licensed person may make representations pertaining to the revocation.
Factory and Machinery 23
After the expiry of the period stated in the notice and after considering any representations made by the licensed person, the Minister may decide whether to continue with the proposed revocation or take no further action.
Notice shall be given to the licensed person by the Minister informing him of the decision where the Minister decides to revoke the licence or take no further action, and the decision shall come into force on the date the notice is delivered to the licensed person.
The decision of the Minister under this section is final.
Notwithstanding the revocation of the licence, the validity of any certificate of fitness issued by the licensed person shall continue to be valid until the expiry date thereof and the licenced person shall continue to assume any obligation, duty and responsibility imposed by or in connection with the issuance of the certificate of fitness.
Granting of new licence upon revocation
Part II
Safety, Health and Welfare
Part III
Person in Charge and Certificates of Competency
Part IV
Notification of Accident, Dangerous Occurence and Dangerous Diseases
Part V
Notice of Occupation of Factory, and Registration and Use of Machinery
Part VI